Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Stealth Coated Titanium Intake Valves
Our website makes it simple to replenish your spare parts inventory and save a bundle on select items not having to buy new elsewhere! And here's a set of slightly Used Stealth Coated Titanium Intake Valves with another budget friendly price tag, to keep a little extra money in your pocket, for a change! This set of 8 titanium valves measure 2.450 diameter, with a 5.620" length. And are equipped with a 11/32" stem and a .250 tip, with a beadlock groove. They were recently checked for straightness and are free of any visible signs of excessive heat. Save money, save time, GoNitrolink.com
Price
$750.00 Original price was: $750.00.$550.00Current price is: $550.00.
Total
$750.00 Original price was: $750.00.$550.00Current price is: $550.00.
Another BRAND NEW item... Without the brand new price!!!
New U.S. Gear Ring & Pinion Set
"Supercharged Savings" right here at GoNitrolink.com with this New U.S. Gear Ring & Pinion Set. And if you're looking for a Pro Gear with a 4.11 ratio, then get ready to save some hard earned cash! This one works with your 9.5" size ford style rear ends and is brand new and ready to install. The big pinion shaft is the 35 spline 1 1/2" size, with a dual drilled ring gear that works with either your 1/2" or 7/16" size bolts. And check out the racer friendly price tag on this new product... Click on "buy now" before it's gone!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Moroso Dry Sump F/C Oil Tank
If you're getting ready to start on that project in your race shop, or just looking to replace your current tank on your funny car or altered then this next item takes care of both! This nostalgia style Used Moroso Dry Sump F/C Oil Tank is sure to go easy on your check book! It's made of aluminium, anodized black and in good used shape with your common nicks, scratches, etc; from normal use. Tank measurements are: 12" tall in front, by 15" tall in the back, by 16 1/4" tall at its highest point by the cap and is 3 1/2" wide. It's free of any damage or repairs, has a 3 gallon capacity and equipped with inside baffles. Inlets on top and the drain plug bung on the bottom are ready to accept your -12 size fittings and drain plug, (not included) and the suction outlet on the back is the -16 size. Also included is a billet filler cap to wrap up this money saving deal!
Price
$291.43 – $410.41Price range: $291.43 through $410.41
Total
$291.43 – $410.41Price range: $291.43 through $410.41
Complete Fuel Hydrometer Kit
Over the years, we have found premium alternatives to every component and had them assembled all together right here to offer this brand new Complete Fuel Hydrometer Kit for all our valued customers! Other brands just don't deliver when it comes to durability, accuracy and clear readability. So, this kit includes a large diameter beaker that's perfect for pouring fuel in an out of and is less prone to tipping over. The durable stainless steel dial thermometer included is equipped with a fuel-proof bezel and replaces the fragile "old school" mercury glass thermometer. The Hydrometers are finely graduated and deliver a clear, accurate nitromethane reading from 0% to 100% if you choose, (with the 4 hydrometer kit). If the full range is not required, then no problem... Just choose the smaller size kit with the range you need and you're all set! All kits include a large fuel-proof polyethylene padded custom die-cut foam case, along with a nitro chart and instructions. Here at "Nitrolink" we sell you just what you need and not what you don't!
Choose the number of Hydrometers needed & range(s) in the "options" menus below.
(0%, Gas & Methanol) (2% - 35%, Nitro) (32% - 60%, Nitro) (60% - 100%, Nitro)
"Nitrolink" carries a complete line of all Portatree Products!
Portatree Eliminator Next Gen Practice Tree
Attention all Drivers!!! Keep those lightning quick reflexes razor sharp and ready to mow down the tree on the starting line! This Portatree Eliminator Next Gen Practice Tree is the ultimate in reaction time training and perfect to work out on while your getting your thoughts together in the race trailer lounge, or sitting in the tow vehicle waiting in the staging lanes. It comes complete with 2 hand switches, 12V wall adapter, wire table top stand and handy carrying case. It utilizes "outdoor bright" LED lights and measures 8.75" high, x 6.25" wide. Optional foot pedals, vehicle connections, etc; can be added later and are sold separately. Many races are won on the starting line and practice makes perfect, so don't be late!!! Order one here today!
MAKE OFFER!!!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Titanium Injector Shaft
Strong, light weight and ready to fly, this upgraded slightly Used Titanium Injector Shaft is designed specifically for all you weight conscience racers out there! This one's in nice shape and measures 20 1/2" long, with a 1/2" diameter. Both ends are equipped with the common 7/16" spline size to accommodate your throttle arms and stops. Expect to pay over $600 bucks for a new one elsewhere! But not here... Not today! Shop right here at GoNitrolink.com for all you're super trick titanium components!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Do you like this item? And can you put it to work? Call or message us your reasonable offer! And if it make sense, then this item is yours!!!
Used Richmond Pro Gear Set
If you're on the hunt for a slightly Used Richmond Pro Gear Set with a 4.57 ratio then get ready to save some hard earned cash! This one works with your 9" size ford style rear ends and is in great shape with normal minimal wear. The big pinion shaft is the 35 spline 1 1/2" size, with a dual drilled ring gear that works with either your 1/2" or 7/16" size bolts. And the best news is the customer friendly price tag... Click on "buy now" before it's gone!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Manley Exhaust Valves
See us first when it comes to stocking your race trailer up with the right amount of spare parts for the weekend! And here's a nice set of Used Manley Exhaust Valves with another budget friendly price tag, to hopefully help keep you going rounds on race day! This set of 8 Inconel valves are 1.925 diameter, with a 5.150" length. And are equipped with a 3/8" stem and a .250 tip, with a square groove. They were recently checked for straightness and are free of any visible signs of excessive heat. Just a couple clicks away and we'll handle the rest!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Weld Racing Beadlock Rings
Now here's an item that may be a little hard to find if you need a replacement! This pair of slightly Used Weld Racing Beadlock Rings is for the 16" wheels that utilize 24 mounting bolts. They're in very nice shape with no damage or repairs and work with your 5/16" size bolts (not included). Black anodized finish is in great condition and this pair is ready to throw down a number if you are!
Price is for 1 set. (2 pieces total.)
We offer a complete line of all Pit Pal products!
Engine Lift Sling
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And if you're running a blower or tunnel ram, then let's get you set up with a brand new Engine Lift Sling just like the one to make that job a whole lot easier! This sling is definitely one nicest on the market and plated for long lasting finish. It has a 1,000 lb. weight capacity and equipped with 4 polyester strap that measure 22" long. Simply hook it to your engine puller and attach the 4 straps to your engine using your header studs or exhaust bolt holes, then pull! It measures 28"W Sling x 27.5" Belt length. Use it once, then wonder how you ever got along without one... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Valve Lash Adjusting Torque Wrench
How about a high quality precision Valve Lash Adjusting Torque Wrench tool all in one!!! It simplifies precision valve lash settings by properly torquing all adjuster nuts accurately. Preset to 22 lbs, it can be customized up to 26 lbs, and comes complete with the following: 1/8, 5/32, & 3/16" Hex Keys. And it accepts any standard 3/8 drive socket (not included). Take one of these to the race track once... Then wonder how you ever managed without one! GoNitrolink.com for all your specialty pit tool needs!
Price
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Total
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Compact Pit Area / Race Trailer Air Mover Fan
900 CFM High Volume Air Flow out of a 1/4 horsepower motor that's compact and uses only 2 amps when running!!! I think you know exactly how to put this Compact Pit Area / Race Trailer Air Mover Fan to work!!! The advanced blade design inside produces a high airflow, while running quietly and efficiently. It's unique shape allows for multiple angle adjustments to direct air flow directly where it's needed. It's low profile design is perfect in between rounds for cooling down race engines, transmissions, race trailers, pit areas, etc. Or, it works equally as well for cooling & ventilation at the race shop. It's equipped with an extra 12 amp power outlet to run a drop light, electric power tool, phone charger, or another fan. And the 15' long cord and built in carry handle make for a very nice package. Overall dimensions are 19.5" long x 17.5" wide x 8.6" tall, plus it weighs only 16.5 lbs. Order right here today... Your crew will be happy you did!
