Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
Used System 1 Dry Sump 426 Hemi Oil Pump
One critical component needed to get your race team to the winners circle is to have good oil pressure! So check out this slightly Used System 1 Dry Sump 426 Hemi Oil Pump that's similar to what many of the pro nitro teams on tour are running simply because of their outstanding flow characteristics, versatility and dependability. This one's in great condition inside and set up with a 1.8 and 2.1 gear size that could work well on your Nostalgia Nitro Funny Car, Alcohol Funny Car, Pro Mod, etc. It features you're standard 5/16" size drive and equipped with an AN -4 fitting for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. Plus, two AN -12 IN/OUT fittings for the filter and a stainless hard loop line are included as well...
Personalized Customer Service second to none! GoNitrolink.com
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
Sitko Standard 426 Hemi Mag Drive
A top of the line quality component, with an affordable price!!! Is exactly what you'll find right here with this brand new Sitko Standard 426 Hemi Mag Drive that's ready to be pressed into service right out of the box! This single style mag drive is made of billet aluminum, with the standard offset. And is belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and is ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear... Save more, race more, win more... GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD 426 Hemi Offset Mag Drive
How about a nice clean profiled product that's sure to offer that professional look your race team is known for! This slightly used RCD 426 Hemi Offset Mag Drive is in excellent shape and free of any damage with normal minimal wear. It's made of billet aluminum and can work with your TFX, BAE, Keith Black, or JP1 cast or billet blocks. And equipped with the RCD style gear, steel shaft with a 5/16" size hex for your oil pump and bronze gear, all in very nice condition. Brand new, these go for right at $1350 bucks! But not here... Not today! Install this one right out of the box, set your mag, then pull to the lanes! Helping your team race for less, is what we do best! GoNitrolink.com
Hemi Cam Degree Tool
The critical job of dialing in your camshaft after engine assembly just became a whole lot easier with this hard to find high quality Hemi Cam Degree Tool that comes complete with a dial indicator and aluminum head stud spacers that are also included to get the job done with precision accuracy. Simply drop the plate over the head studs on your #1 cylinder then go to work! Top plate is anodized black to help prevent corrosion and this kit is ready to provide years of service if cared for properly. Specialty pit tools available 24/7 right here! GoNitrolink.com
THEY'RE BACK...
AND AVAILABLE RIGHT HERE!!!
Stage 5 Intake Rockers - Oiler
If you're looking for a cylinder head component that offers strength, durability and performance then look no further! These brand new Stage 5 Intake Rockers - Oiler check all the boxes above and can be ordered separately or as a complete set. These are the upgraded style with the super trick oiler hole by the adjuster. They're available in either 1.6 or 1.7 ratio. And we'll also include a 7/16" size adjusters & nut to make the deal that much better! For all your top fuel & alcohol racing components, go with "Nitrolink".
Used 426 Hemi "Core" Camshafts
To help keep all our valued customers on a budget at the racetrack and going rounds, we offer a limited supply of Used 426 Hemi "Core" Camshafts from different manufactures to save you a few bucks not having to buy new elsewhere! Several cam companies offer the service to re-grind your camshaft to your exact specifications for a reasonable charge. So, why not take advantage, get the cam specs you need and have money left over to buy more parts! Helping racers racing budgets go further! GoNitrolink.com
Sold Separately.
BAE 426 Hemi Fuel Heads
Check out this "complete" set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They're the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16" stem). And Manley inconel 1.925 exhaust valves (3/8" stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we'll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $3895.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE 426 Hemi Manifolds
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Standard deck, short deck, or .100 tall... One of these brand new BAE 426 Hemi Manifolds could have your name on it, what ever deck preference you choose! These light weight aluminum fuel head blower manifolds are the standard non set-back style, and have provisions to accept your standard size burst panel, (sold separately) on one end. And a threaded oil filler bung on the other. Quality craftsmanship is on display right here, so give us a call anytime as we're happy to help assist you in your pursuit to victory!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
