We offers a complete line of all PSI Supercharger products!
PSI Single Mag Drive
Ignition timing is critical when it comes to getting your race car from A to B as quickly and efficiently as possible, right! And that's were this brand new PSI Single Mag Drive comes into play. Probably one of the nicest designs on the market, this one works with your popular Dunn clover leaf style drive on your mags. It's anodized black for that awesome look and sure to offer a well finished, sleek, profiled component that performs just as good as it looks! Outside housing is made of billet aluminum and it comes complete with a bronze gear, oil pump shaft and belt already installed and ready to go to work! Top quality racing components taken to the next level! GoNitrolink.com
Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
"Nitrolink" offers a complete line of all Sander products!
SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black
If your in the market for a new set of wheels that can perform on the race track just as good as they look! Then check out this brand new set of SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black anodized for that awesome appearance we just can't get enough of! This set is NHRA "tech friendly" with SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! If you have any further questions, just give us a call as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Black
Big Show Top Fuel Dragster or Nitro Funny Car Legal with upgraded SFI tags!!! This set of 16x16 Sander Top Fuel SFI 15.4 Beadlock Rear Wheels - Black are already anodized for that awesome appearance we all admire! This set comes complete with the mandatory drive hub centers, required for NHRA pro category competition. They're brand new and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings are scalloped for lighter weight and utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! Mount a set of these up and make a statement on race day that you're there to win!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander 10 Spoke Funny Car Front Wheels - Black
Check out the awesome profiled edges on this set of Sander 10 Spoke Funny Car Front Wheels - Black finish. These are brand new and ready to offers your nitro, alcohol, or gas burning Funny Car, Altered, or Pro Mod, one of the latest style wheels on the market! So, if you're looking for that nostalgic look, you won't find it here! They're the standard 15 x 3.5 size, one piece billet aluminum models and can be ordered to fit either Anglia, or Strange (larger bearing) spindles. They have previsions to accept your front disc brakes, if you're running them. And are NHRA "tech friendly" with SFI 15.2 tags included. The great thing about this style wheel is that the center caps screw into the wheel instead of push in like some of the other brands out there... This is a huge benefit because now you don't have to worry about having to tape your center caps to keep from loosing them. They come with a new set of bearing races, bearings, seals, center caps and valve stems to complete the package. How cool would a set of these look on your car in the winners circle? Thumbs Up!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander 10 Spoke Dragster Front Wheels - Black
If you're going for that cool stealth look on the front of your race car, then this set of
Sander 10 Spoke Dragster Front Wheels - Black finish are sure to seal the deal! They're brand new, anodized black and ready to equip your nitro, alcohol, or gas burning Dragster or Altered
with one of the latest style wheels on the market! So, if you're looking for that nostalgic look, you won't find it here! They're the standard 17 x 2.2 size, one piece billet aluminum models and fit the popular Anglia spindles. They're NHRA "tech friendly" with SFI 15.2 tags included. And the great thing about this style wheel is that the center caps screw into the wheel instead of push in like some of the other brands out there... This is a huge benefit because now you don't have to worry about having to tape your center caps to keep from loosing them. They come with a new set of bearing races, bearings, seals, center caps and valve stems to complete the package. Call anytime for more details... We're here to help!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Funny Car Front Wheels - Black
How about another top quality product to add to your race team! This brand new set of Sander Funny Car Front Wheels - Black anodized and ready to offer your nitro, alcohol, or gas burning Funny Car, Altered, or Pro Mod, that awesome stealth look you've been looking for! This is the exact style wheel many of the pro nitro teams on tour are running. They're the standard 15 x 3.5 size, one piece billet aluminum models and can be ordered to fit either Anglia, or Strange (larger bearing) spindles. They have previsions to accept your front disc brakes, if you're running them. And are NHRA "tech friendly" with SFI 15.2 tags included. The great thing about this style wheel is that the center caps screw into the wheel instead of push in like some of the other brands out there... This is a huge benefit because now you don't have to worry about having to tape your center caps to keep from loosing them. They come with a new set of bearing races, bearings, seals, center caps and valve stems to complete the package. This set is ready to trip the beams at over 300 MPH and look mighty fine doing it!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Sander products!
Sander Dragster Front Wheels - Black
How about another top quality product to add to your race team! This brand new set of Sander Dragster Front Wheels - Black anodized is ready to offer your nitro, alcohol, or gas burning Dragster or Altered that awesome stealth look you've been looking for! This is the exact style wheel many of the pro nitro teams on tour are running. They're the standard 17 x 2.2 size, one piece billet aluminum models and fit the popular Anglia spindles. They're NHRA "tech friendly" with SFI 15.2 tags included. And the great thing about this style wheel is that the center caps screw into the wheel instead of push in like some of the other brands out there... This is a huge benefit because now you don't have to worry about having to tape your center caps to keep from loosing them. They come with a new set of bearing races, bearings, seals, center caps and valve stems to complete the package. This set is ready to trip the beams at over 300 MPH and look mighty fine doing it!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$346.00 – $366.00Price range: $346.00 through $366.00
Total
$346.00 – $366.00Price range: $346.00 through $366.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Spin-On Oil Filter
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This brand new System 1 Pro Series Spin-On Oil Filter is made of billet aluminum and can be used on supercharged, nitro-burning, injected nitro, supercharged alcohol, or gas applications. It's anodized black for that cool stealth look, with a reusable filter element inside that can easily be inspected or serviced by simply removing the inspection cap. It's equipped with the correct 75-micron element for use with heavy weight oil. Or, can be ordered with a 45-micron element if you're running a lighter weight oil. And o-rings are also included. Another quality product to add to your race team!
Choose your element size & fuel application in "options" menu below.
Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster Dual Chute Mounts
We have a few sets of slightly used Dragster Dual Chute Mounts at the race shop available and ready to ship today! They're sold in pairs, made of chrome moly tubing and anodized black for that cool stealth look. Tube diameter measures 7/8" total. And both weigh in at a light weight .7 pounds. They can be welded up as is, or fit inside your existing slightly larger size diameter tubing. Then held in place by your common style quick release pins, (not included). Then removed with your chute packs, etc; to allow you to pack both chutes on the ground, on top of a milk crate, etc; for a quick, easier pack. Another money saving item to help racers on a budget get to the winners circle!
Sold in sets.
Connecting Rod Vise
As we all know, aluminum rods can be a handful to hold on to while your servicing them in between rounds, or back at the race shop... So how about a solution! This super handy Connecting Rod Vise was designed to securely hold one or more of your aluminum rods while you service them, to help prevent the risk of damage. It's perfect for removing the caps, inspecting or changing rod bolts, checking rod clearances, polishing, or machining. It's strong, durable, made of billet aluminum, anodized black and can be permanently mounted to your work bench, or used with your shop vise. Inside working area is approx 4 3/4" x 2" with an overall height of 10" total by 7" wide, by 2" deep. Order one today... Problem goes away!
