Dual Feeler Gauge Handles
It's all about choices for our valued customers! So, here's one more style of billet Dual Feeler Gauge Handles to consider if you prefer using the small style that holds 2 separate gauges on the same handle. They're strong, durable and made of billet aluminum to help run thru a set of valves quickly without having to fumble with 2 separate gauges . They measure 3" x 1.25" x .5" total and can accept various sizes of 1/2" wide feeler gauges (not included) depending on your application. They're sold separately and can be stacked 3-4 gauges high if you choose. Ordering made simple, 24/7 right here on our website! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Extra Deep Clutch / Head Stud Nut Socket
Cool racing components taken to the next level... "Nitrolink" offers hard to find specialty pit tools like this one to all our valued customers to help make certain jobs easier and more efficient! So, lets offer this brand new Extra Deep Clutch / Head Stud Nut Socket that eliminates several problems at once by itself...
1. Completely does away with using an extension when re-torquing your head stud nuts delivering a more precise torque spec.
2. It extends past your rocker stands, shafts, etc; when removing or re-torquing your head stud nuts.
3. Extended length allows you to re-torque clutch stand nuts quickly and easily with the bellhousing on.
4. It extends past the bellhousing just enough to prevent from loosing it while re-torquing clutch stand nuts, doing away with having to use an extension.
This high quality tool is made to last from heat treated steel and measures 7" in length, to fit your 1/2" drive torque wrench, breaker bar, etc. And can be ordered in either 11/16" or 13/16" sizes to fit your 12 point nuts. Not intended for use with air or battery impact guns. Order one right here today... And it's on the way!
We offer a complete line of all Simpson Race Products!
Simpson Chin Strap
Help equalize those g-force effects right at the step with a brand new Simpson Chin Strap just like this one!!! This is the newest style, that's black in color and made of nylon. It's now equipped with a handy quick disconnect clip that allows it to be removed from the helmet instead of always hanging permanently off of it like the old style. Attach the opposite side to your safety harness, quickly adjust as desired, then drop the hammer... Save more, race more, win more! GoNitrolink.com
Header Bracket Pins
And if we offer the super trick titanium header brackets here at gonitrolink.com then we better off the brand new stainless steel Header Bracket Pins to go with them, right! This is the exact size needed to work with the TAK titanium header brackets. They're precision made, sold separately and ready to hold your restraint straps in place... And look mighty fine doing it!
"Nitrolink" carries a complete line of all Simpson Race Products!
Simpson Tow Straps
The next time you tow up to the lanes for the next round, why not let us set you up with one of these brand new high quality Simpson Tow Straps to make sure the job gets done properly! These straps measure 15 ft. long and feature a 2" wide webbing that's equipped with D-rings on both ends. These straps have been responsible for towing thousands of race cars into the winners circle over the years... And would be happy to do the same for your race team! Order yours right here!
"Nitrolink" offers a complete line of all MSD Products!
MSD Pro Mag 44 Wire Retainer
Attention in the pits!!! This MSD Pro Mag 44 Wire Retainer is the perfect item to pair up with the Pro Mag 44 Big Cap on your awesome ride. It's one and only job is to keep all wires securely attached to each wire terminal while you trip the beams at the other end! It installs easily, removes quickly and comes complete with mounting hardware included.
Choose either red or black to match your other MSD components in the "options" menu below.
We offer a complete line of all Pit Pal products!
Pit Pal Aluminum Channel Installation Kit
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And now, lightweight trailer doors can take advantage of the different cabinets and racks we have to offer by installing a brand new Pit Pal Aluminum Channel Installation Kit for extra added bracing! And because trailer doors don't have studs for mounting, you can easily install channels to the outer door frame with support screws or rivets. Once in place, the product mounts to the channels creating no added stress to your doors surface. Each kit comes with 2 channel strips that measure 48"W x 3.25"H and either 20 screws or 16 rivets... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Choose hardware preference in the "Options" menu below.
Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
Price
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Total
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Non Pass-Thru Analog Box Circuit Board
This brand new Racepak Non Pass-Thru Analog Box Circuit Board works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It a replacement for the main circuit board in your non pass-thru analog box if it gets damaged. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Price
$41.95 – $43.95Price range: $41.95 through $43.95
Total
$41.95 – $43.95Price range: $41.95 through $43.95
We offer a complete line of all Automan products!
Billet Burnout Stops
It's sleek, it's profiled, it's just plain awesome! These super trick Billet Burnout Stops are a team owners best friend when it comes to keeping engine RPM at a safe level during the burnout. Installs instantly on your throttle cable by the injector throttle stop. After the back up, simply pull the ring attached to the stainless safety pin clip to remove it, then bring your driver up to the beams! They're made of billet aluminum, polished and anodized for a bright brilliant shine, to stand out so you don't forget to take them off. And they're available in 2 throttle cable sizes, 10/32" or 1/4" inch. Length may need to be adjusted if needed. Instruction sheet included... Top quality products = a top quality race team! GoNitrolink.com
We offer a complete line of all Pit Pal products!
Chassis Stabilizer Storage Mount
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's help you get even more organized by offering a brand new Chassis Stabilizer Storage Mount just like this one, to help keep yours stored safely when not in use! It's made of .125 durable aluminum and measures 20"W x 1 7/8"D x 4"H. And the perfect solution to help keep your inflatable Chassis Stabilizer out of the way, yet ready to go. Plus, it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Chassis saver sold separately.
We offer a complete line of all Pit Pal products!
Extension Cord Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And when it comes to keeping your race trailer organized and efficient, then a brand new Extension Cord Holder just like this one is sure to check all the boxes! It's heavy duty, made of durable aluminum, hand welded and built to last. Measurements are 6.5"H x 5"W x 5.25"D and it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Hoses/Cords not included.
