Extra Deep Clutch / Head Stud Nut Socket
Cool racing components taken to the next level... "Nitrolink" offers hard to find specialty pit tools like this one to all our valued customers to help make certain jobs easier and more efficient! So, lets offer this brand new Extra Deep Clutch / Head Stud Nut Socket that eliminates several problems at once by itself...
1. Completely does away with using an extension when re-torquing your head stud nuts delivering a more precise torque spec.
2. It extends past your rocker stands, shafts, etc; when removing or re-torquing your head stud nuts.
3. Extended length allows you to re-torque clutch stand nuts quickly and easily with the bellhousing on.
4. It extends past the bellhousing just enough to prevent from loosing it while re-torquing clutch stand nuts, doing away with having to use an extension.
This high quality tool is made to last from heat treated steel and measures 7" in length, to fit your 1/2" drive torque wrench, breaker bar, etc. And can be ordered in either 11/16" or 13/16" sizes to fit your 12 point nuts. Not intended for use with air or battery impact guns. Order one right here today... And it's on the way!
Price
$291.43 – $410.41Price range: $291.43 through $410.41
Total
$291.43 – $410.41Price range: $291.43 through $410.41
Complete Fuel Hydrometer Kit
Over the years, we have found premium alternatives to every component and had them assembled all together right here to offer this brand new Complete Fuel Hydrometer Kit for all our valued customers! Other brands just don't deliver when it comes to durability, accuracy and clear readability. So, this kit includes a large diameter beaker that's perfect for pouring fuel in an out of and is less prone to tipping over. The durable stainless steel dial thermometer included is equipped with a fuel-proof bezel and replaces the fragile "old school" mercury glass thermometer. The Hydrometers are finely graduated and deliver a clear, accurate nitromethane reading from 0% to 100% if you choose, (with the 4 hydrometer kit). If the full range is not required, then no problem... Just choose the smaller size kit with the range you need and you're all set! All kits include a large fuel-proof polyethylene padded custom die-cut foam case, along with a nitro chart and instructions. Here at "Nitrolink" we sell you just what you need and not what you don't!
Choose the number of Hydrometers needed & range(s) in the "options" menus below.
(0%, Gas & Methanol) (2% - 35%, Nitro) (32% - 60%, Nitro) (60% - 100%, Nitro)
426 Hemi Short Block Covers
So, if you're running an Alan Johnson, Brad, or Keith Black Block, then this next item should be right up your alley! Check out these 426 Hemi Short Block Covers that I'm sure every hemi racer out there can put to work immediately! Way to much time and money goes into tear-down, assembly, installation, etc; to even think about having dirt, metal shavings, hardware, or other foreign objects fall down inside your short block. These covers come in a 2 piece set and are made from .050 aluminum and powder coated black. They accept either 1/2" or 9/16" size head studs. And cover the whole top part of the short block as well as all cylinders. They clean up quickly, store away almost anywhere and can't wait to start protecting that spare short block in your race shop, trailer, or pit area!
Billet Clutch Feeler Gauge Handles
If you prefer this style of Clutch Feeler Gauge Handles then "Nitrolink" has you covered there as well. These are possibly the most comfortable handles on the market, as they were actually designed to fit the shape of your hand. They're strong, durable and made of billet aluminum and make it a breeze to set your clutch adjustment up in a flash! They can accept various sizes of 1/2" wide feeler gauges depending on your application. These brand new anodized handles are color coded in either blue or red, so you know exactly the one to reach for when your going rounds on race day!
Choose either blue or red in the "options" menu below.
Sold separately. Gauges not included.
Piston Rack Cover
Here's your chance to give your race team that professional look it deserves! This Piston Rack Cover is professionally made with the highest quality marine grade vinyl. It's durable, cleans up easily and perfect for covering up those expensive racks of Pistons and Rods so they're clean and ready for battle when you need them! Don't risk picking up dirt, metal shavings, etc; before they're installed... Pair this item up with one of our Piston Racks and be set up for good!
AN Fitting Cap & Plug Kit
This next item offered here on GoNitrolink.com has only one job to do and that is to help keep both your fuel and oil system clean and in the condition needed to assure maximum performance on the race track! This brand new plastic AN Fitting Cap & Plug Kit offers all the popular sizes needed to keep all your open lines and fittings covered to eliminate any dust, dirt, metal shavings, or debris from ruining your weekend. It also helps eliminate those annoying drips in your pit area, or on your trailer or race shop floor. This handy assortment includes both caps and plugs in -3, -4, -5, -6, -8, -10, -12 and -16 sizes. And it comes complete with a metal carrying case that stores away easily in your race trailer or race shop and keeps all sizes organized neatly. So, if you pay close attention to all the details when it comes to streamlining your racing operation, then this kit is definitely for you!
We carry a complete line of all Dan Olson Products!
Header Covers
"Nitrolink" offers several different styles of Header Covers to choose from, to help keep unwanted debris out of those pipes while your towing back to your pit area! This brand new set works exceptionally well with your Dan Olson or similar style headers and are made of durable, light weight aluminum so they clean up easily. And they're polished to a brilliant shine so they deliver that clean professional finished look your race team is known for! The standard size offered here is for the 2 1/2" size pipe diameter with a 40° angle. However, custom sizes are also available at a slightly higher rate. Order your set today on our website, then check one more thing off your list!
Sold as a set.
Price
$24.95 Original price was: $24.95.$19.95Current price is: $19.95.
Total
$24.95 Original price was: $24.95.$19.95Current price is: $19.95.
There's only 2 places you can go to get your "Official Nitrolink Racing Gear" and that would be either in our pit area, or right here on our website!
Official Nitrolink F/C Racing Hats
And just like the t-shirts, these Official Nitrolink F/C Racing Hats are being offered right here before you can even get them at the race track... This is the first run of hats and
we'll also offer them at a lower than normal price to help introduce our brand new website and services to all or valued customers! These high quality ball caps are made by Flexfit, available in 2 popular sizes and come in black with either the Top Fuel Dragster or Nitro Funny Car logo embroidered on the front. Join our winning team today and show everyone you know exactly where to go for high performance nitro and alcohol racing components! GoNitrolink.com
Choose size & logo choice in the "options" menu below.
Blower & Injector sold separately.
Price
$145.60 – $151.00Price range: $145.60 through $151.00
Total
$145.60 – $151.00Price range: $145.60 through $151.00
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Red Rocker Stands
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Choose your style... Red, Blue, Silver, or Black! Because if you're a valued "Nitrolink" customer, we'll make sure to offer you all the choices! These brand new BAE Red Rocker Stands are the popular standard ratio style, made of billet aluminum and work with your BAE 4's, 5's, or 6 fat heads or Alan Johnson muscle heads. And the great news is they can be purchased separately, or as a set. They come in 2 variations, oiler style or end stand style and come equipped with steel rocker stud inserts for a secure fit. Ordering right here on our website really is as easy as 1,2,3!!!
Choose oiler style or end stand style in the "options" menu below.
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Exhaust Rocker Shafts - Extreme Duty
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
If we offer all the different style stands... Then we have to offer these brand new BAE Exhaust Rocker Shafts - Extreme Duty to go with them, right! These are the extreme duty style and work with any of the BAE fat head Extreme Duty Rocker Stands that utilize the 5/16" rocker shaft bolt. And can work with the Brad 3's, 4's, 5's, or 6 cylinder heads. They can be purchased individually or as a set, making this the perfect opportunity to replace that worn out set of shafts on the car. Or, put a set away in the trailer for when you need them the most! So, if you need em, here they are... If you have em, then here's your spares!
All shafts are sold separately.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Pro Bottom End Tray - Triple-T
Designed to sit at an angle for easy access and vision for your bottom end technician! This brand new Pro Bottom End Tray - Triple-T is the only choice for many of the top pro nitro teams on tour. Every tool needed to do the job has it's own spot to help increase efficiency on race day! It's durable, made of light weight aluminum and can be ordered with a natural finish, or powdercoated black if you choose. It's equipped with just the right amount of divided sections and racks to accommodate your tools, sockets, hardware, etc. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Price: $525.00 - $575.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Driver / Crew Nitro Masks
So, the fans sure love that morning dose of nitromethane fumes during a warm-up first thing in the morning on a race weekend! But the racers and crew... Maybe, not as much! So how about we offer these Driver/Crew Nitro Masks to make that process a lot easier for all of you to work with. These are made with a durable compression silicone rubber that provides exceptional comfort. The universal "one size fits most" design offers a balanced low pressure positive seal. They're equipped with a hard coated, anti-scratch, anti-fog treated poly-carbonate lens that offers an extended large panoramic field of vision. These masks are NIOSH Approved and fitted with 5 quick release buckles that allows for a fast easy removal and provide an even comfortable fit to prevent slipping. The quarter-size inhalation valves allows the user to inhale a larger volume of air per breath, allowing for more comfort and productivity. And a nylon storage/carrying bag is included as well. Order one, or a dozen with just a few clicks right here... Job done!
