We carry a complete line of all Dan Olson Products!
Header Covers
"Nitrolink" offers several different styles of Header Covers to choose from, to help keep unwanted debris out of those pipes while your towing back to your pit area! This brand new set works exceptionally well with your Dan Olson or similar style headers and are made of durable, light weight aluminum so they clean up easily. And they're polished to a brilliant shine so they deliver that clean professional finished look your race team is known for! The standard size offered here is for the 2 1/2" size pipe diameter with a 40° angle. However, custom sizes are also available at a slightly higher rate. Order your set today on our website, then check one more thing off your list!
Sold as a set.
Leak Down Testers
Quality, durability and accuracy! That's the best way to describe one of these brand new Leak Down Testers ready to assist you in checking for bent or leaking valves, bad ring seal, or even leaking head gaskets. Both gauges feature rubber bumpers for extra added protection. And this model is outfitted with a control inlet valve to avoid shock to the gauges when air is turned on and helps provide a more accurate reading, easier use and longer gauge life. It comes complete with either a 12mm, or 14mm spark plug connector and hose. Don't forget to save GoNitrolink.com to your favorites for all your high end racing component needs!
Choose either 12mm, or 14mm spark plug size in the "options" menu below.
Main Bearing Holder
Providing your bottom end technician with the right tools to get the job done efficiently is exactly what this brand new Main Bearing Holder does best! This professionally made, high quality rack was designed specifically to make inspection in between rounds quick and easy! It holds all your main bearings securely and is clearly marked so you know exactly what bearing went where. It's made of durable aluminum, cleans up easily after use and it's compact size (8"W x 8.5"L x 1"H) stores away nicely in your race trailer or at your race shop when not in use... Save, Race, Win, Repeat! GoNitrolink.com
Rod Cap & Bearing Holder
As you know, organization has always been key to a successful race weekend! So, lets get your race team set up with a brand new Rod Cap & Bearing Holder like this one to make inspection in between rounds quick and easy! This professionally made, high quality rack holds all your rod caps and rod bearings together securely. And it's clearly marked so you know exactly what cap and bearing went where. It's made of durable aluminum, cleans up easily after use and it's compact size (5 3/4"W x 12 9/16"L x 1 1/2"H) stores away nicely in your race trailer or at your race shop when not in use. Specialty pit tools, racks and a whole lot more! GoNitrolink.com
"Nitrolink" offers a complete line of all Taylor Motorsports Products!
Taylor Pilot Chute
Top of the line products made by racers for racers is what you'll find right here with this brand new Taylor Pilot Chute that's the new current style, now required because it's easier to spot on the race track by officials if it becomes detached. This one works with the 12' Taylor Crossform Chute and comes complete with attachment line and packing string. Help keep your Chute in the proper condition required to help it perform at its best on race day. So, if you need one... Here it is! If you have one... Then don't forget your spare! Ordering made easy, 24/7 right here! GoNitrolink.com
Price
$125.30 – $249.00Price range: $125.30 through $249.00
Total
$125.30 – $249.00Price range: $125.30 through $249.00
We offer a complete line of all Pit Pal products!
Aluminum Wheel Chock
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's offer a brand new Aluminum Wheel Chock to help keep your ride even more secure during transport! This one's made of durable aluminum and completely box-welded for added strength. It's sold separately, or as a pair for an even better deal. And works in conjunction with your ratchet tie down straps on either front or rear tires. It features a handle in the back for easy carrying and measures 6.25"H x 9.875"W x 11.675"D. Plus, it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Sold separately, or as a pair. Choose your preference in the "Options" menu below.
AN Fitting Cap & Plug Kit
This next item offered here on GoNitrolink.com has only one job to do and that is to help keep both your fuel and oil system clean and in the condition needed to assure maximum performance on the race track! This brand new plastic AN Fitting Cap & Plug Kit offers all the popular sizes needed to keep all your open lines and fittings covered to eliminate any dust, dirt, metal shavings, or debris from ruining your weekend. It also helps eliminate those annoying drips in your pit area, or on your trailer or race shop floor. This handy assortment includes both caps and plugs in -3, -4, -5, -6, -8, -10, -12 and -16 sizes. And it comes complete with a metal carrying case that stores away easily in your race trailer or race shop and keeps all sizes organized neatly. So, if you pay close attention to all the details when it comes to streamlining your racing operation, then this kit is definitely for you!
Price
$136.50 – $160.00Price range: $136.50 through $160.00
Total
$136.50 – $160.00Price range: $136.50 through $160.00
Enderle 3-Way Fuel Shut-Off
It's small, lightweight and flows the full line size! That's the best way to describe this brand new Enderle 3-Way Fuel Shut-Off that easily installs between your fuel pump outlet and metering valve, with the outlet on the side returning fuel back to the tank. When in the "off" position, it allows you to turn the engine over to adjust valves, check timing marks, etc; without feeding fuel into the engine. It's equipped with a pump fitting and can be ordered with either -6, or -8 size flared fittings, your choice! Cable clamp also included. GoNitrolink.com for unmatched customer service anywhere!
Choose either -6, or -8 size in the "options" menu below.
MSD "Pro Crimp" Plug Wire Crimp Tool Pliers
Try it once.. And wonder how you ever got along without it! This is one of those "specialty tools" that will be the first and only one you reach for when it comes to building a new set of plug wires on your race car. These high quality MSD "Pro Crimp" Plug Wire Crimp Tool Pliers were specifically designed to carry out that unwanted task and do it better than anything else on the market. It's precision stripping jaws deliver a precise cut, then crimps both sides, 90 degree and straight wire ends. It features interchangeable jaws allowing for a variety of different style crimps with one heavy duty tool. The hardened steel frame with comfortable molded hand grips and the ratchet action provides secure, factory quality crimps every time. Order one today... Problem goes away!
Sleeve Installer Tool
Check out the quality and craftsmanship that goes into making this brand new
Sleeve Installer Tool one of the nicest driver's you will ever use! This one's anodized black and comes equipped with a serrated handle for a sure grip. It weighs in at almost 10 lbs; for just the right leverage to assure the job gets done correctly with less effort. Pair this Sleeve Installer up with one of our Sleeve Puller Slide Hammers (sold separately) for a perfect match! GoNitrolink.com for all your specialty pit tool needs!
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson Pilot Chute
As you know, it's important to keep every component on your race car in top condition before you head out for the next event. And this Simpson Pilot Chute should be one of the items at the top of your list, when it comes to keeping your Chute in the proper condition required to help it perform at its best. This is the new current style, standard duty model that's now required because it's easier to spot on the race track by officials if it becomes detached. And it works with both the 12' Simpson Top Fuel "Pro" Crossform Chute, or the 10' Simpson Skyjacker "Sportsman" Chute. So, if you need one... Here it is! If you have one... Then here's your spare!
T Handle Torquing Spark Plug Wrench
Probably one of the most popular specialty pit tools would have to be a
T-Handle Torquing Spark Plug Wrench. And when it comes to changing spark plugs quickly and easily, this style is exactly what your race team needs to get the job done with the same efficiency and accuracy as the pro nitro teams on tour! This tool is designed to offer a correct balance while in use and allows the user to preset their desired spark plug torque spec. Once that's reached, the handle clicks and your done! This is the perfect solution to help do away with those costly repairs after accidentally blowing out the treads on your billet cylinder heads. They're powdercoated black to prevent scratching and can be ordered to fit your common 13/16" size plugs, or the smaller 5/8" size peanut plugs... When it comes to racing pit tools, now you know exactly where to go for all the cool items! GoNitrolink.com
Choose size needed in the "options" menu below.
