Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used MSD Battery Packs & Charger Kit
Lets save you some money right here with this Used MSD Battery Packs & Charger Kit that helps power up your ignition management such as six shooters, power grid, etc. Each battery delivers 14.4 volts and all three items are in great shape and equipped with Deutsch connectors for a secure fit. This package comes complete with (1) MSD smart charger and (2) battery packs, one for the car and one for a spare. This kit will be sold with a fresh set of batteries, so rest assured your money will be well spent here!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Moroso Dry Sump F/C Oil Tank
If you're getting ready to start on that project in your race shop, or just looking to replace your current tank on your funny car or altered then this next item takes care of both! This nostalgia style Used Moroso Dry Sump F/C Oil Tank is sure to go easy on your check book! It's made of aluminium, anodized black and in good used shape with your common nicks, scratches, etc; from normal use. Tank measurements are: 12" tall in front, by 15" tall in the back, by 16 1/4" tall at its highest point by the cap and is 3 1/2" wide. It's free of any damage or repairs, has a 3 gallon capacity and equipped with inside baffles. Inlets on top and the drain plug bung on the bottom are ready to accept your -12 size fittings and drain plug, (not included) and the suction outlet on the back is the -16 size. Also included is a billet filler cap to wrap up this money saving deal!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Large
Another budget friendly high performance component would be this slightly Used AFT Slide Valve - Large style, designed for the larger size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Fuel management at a deep discounted price, right here!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Stealth Coated Titanium Intake Valves
Our website makes it simple to replenish your spare parts inventory and save a bundle on select items not having to buy new elsewhere! And here's a set of slightly Used Stealth Coated Titanium Intake Valves with another budget friendly price tag, to keep a little extra money in your pocket, for a change! This set of 8 titanium valves measure 2.450 diameter, with a 5.620" length. And are equipped with a 11/32" stem and a .250 tip, with a beadlock groove. They were recently checked for straightness and are free of any visible signs of excessive heat. Save money, save time, GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Now here's another quality racing component that won't empty your bank account nearly as quick as buying new! This slightly Used Waterman Wet Sump Oil Pump is your standard gear style, equipped with an outside oil pressure adjustment valve. Recently inspected, the inside of the housing is in great shape with the gears showing normal minimal wear. Pump is set up with (2) #12 fittings for your oil filter, (1) #16 fitting for your oil pick-up and (1) #6 fitting for your oil pressure reading. Save BIG $$$'s here, so order today!
Racepak Sportsman Computer
Specifically tailored to your needs... This Racepak Sportsman Computer is the perfect set-up for Racers on a budget that simply don't need all the bells & whistles offered by the more expensive models. And the great news here is we can outfit this system with the basic functions needed to upgrade your state of the art racing operation just the way you want it... And save you hundreds of $$$'s at the same time!!!
This system is slightly used, in great shape and free of any damage or repairs. And could work well on your Top Dragster, Super Comp Dragster, 7.0 Pro, Nostalgia Eliminator, Pro Mod, Drag Boat, Tractor Puller and so on. It can work with your Racepak UDX Dash (not included). And "out of the box" functions include Engine RPM, G-Meter and Battery Voltage. With the capability of adding other basic functions later if you choose, such as Oil Pressure, Individual Exhaust Temp, Drive Shaft Speed, and more. The data logger is in great shape with normal use and weighs in at under 1 lb. And other items included are the wiring harness, Racepak software and SD card. So, here's your chance to take full advantage of the valuable tuning info a Racepak Data System has to offer. This System is priced to move, available immediately and definitely ready to go to work... Racers helping Racers do what they do best! GoNitrolink.com
Enderle Buzzard Injector
Anodized black for that awesome stealth look!!! And that only makes it easier to imagine how cool this Enderle Buzzard Injector would look bolted up to your ride! This one's slightly used, in great shape with no damage or repairs. And ready to offer it's new owner that iconic look that will never go out of style. Freshly anodized and ready to install, this injector has mounting holes that measure the standard 15 1/4" x 4 3/8" center to center with the bottom opening measuring 15" x 4 7/16" total. And it comes loaded with throttle arms and throttle stops also included as well. The large 5" size butterflies are in great shape allowing the throttle shaft to operate nice and smooth with no binding. And if you need a super trick Billet Starting Line Air Bleed Valve to go with it (sold separately)... We can do that too! Quality Racing Components 24/7 right here... GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD 426 Hemi Offset Mag Drive
How about a nice clean profiled product that's sure to offer that professional look your race team is known for! This slightly used RCD 426 Hemi Offset Mag Drive is in excellent shape and free of any damage with normal minimal wear. It's made of billet aluminum and can work with your TFX, BAE, Keith Black, or JP1 cast or billet blocks. And equipped with the RCD style gear, steel shaft with a 5/16" size hex for your oil pump and bronze gear, all in very nice condition. Brand new, these go for right at $1350 bucks! But not here... Not today! Install this one right out of the box, set your mag, then pull to the lanes! Helping your team race for less, is what we do best! GoNitrolink.com
Gibson-Miller Blower Front Cover & Snout
When it comes to outfitting your race car with hard to find replacement components just like this slightly used Gibson-Miller Blower Front Cover & Snout then you're definitely going to want to check back often right here! This money saving package is in nice shape, free of any damage or repairs and offers an anodized aluminum front cover, light weight 6 1/2" magnesium snout, starter bracket, 1 1/4" diameter (24 spline) coupler and ARP 12pt. mounting hardware all for one low price! Save more, Race more, Win more... GoNitrolink.com
MSD Pro Mag 44 Points Box & Coil Kit
Top of the line quality components, at a money saving price is exactly what you'll find right here with this slightly used MSD Pro Mag 44 Points Box & Coil Kit that's sure to help you save both time and money ordering everything all in one place! This kit features a standard MSD #81453 Points Box that's the non-rev style, that connects quickly to your MSD Pro Mag 44 Magneto using a 4 pin Deutsch connector that's already installed. It's black in color, so it matches the MSD #81423 Pro Mag 44 Coil that's also included, for that awesome stealth look! Plus, all the mounting hardware, anti-vibration mounts, etc; are already installed on the funny car style aluminum mounting plate that's also included with the complete package. All components will be tested prior to shipping, so you know your money was well spent here. And get ready to save over $1,400 Buck not having to buy new elsewhere!
Racers helping Racers do what they do best... For Less! GoNitrolink.com
Used PSI Set-Back Blower Snout & Coupler
When it comes to state of the art superchargers and components, PSI delivers unmatched quality and craftsmanship! And this slightly Used PSI Set-Back Blower Snout & Coupler is a perfect example! It works in conjunction with your PSI roots style supercharger that sits on top of your set-back style blower manifold. It's measures 11 1/2" long flange to flange and mounts to your front cover with 12 total 5/16" size bolts (not included). It's o-ring equipped on one side for a secure seal and utilizes the standard blower pulley bolt pattern on the other. The slotted area in front was designed to work with your snout clamp style belt guard (sold separately). And the steel shaft and coupler are also included to complete the package. This is the last one we have so if you don't want to buy new, then here's your chance to save... Order today!
