Brodix -12 SBC Aluminum Heads & Shaft Rockers
All Small Block Chevy racers to the lanes please!!! But first, check out this slightly used set of Brodix -12 SBC Aluminum Heads & Shaft Rockers that come with a budget friendly price tag to help ease expenses on race day! This set of 15° aluminum cylinder heads is in nice shape and free of any damage or repairs. And if you choose, you can run water through them. They come assembled with a slightly used set of Manley stainless 2.140" intake valves & 1.600" exhaust valves, Manley triple springs and a set of titanium retainers. Jesel Shaft Rockers included are the 1.65 ratio for both intake and exhaust, with a set of 3/8" size adjusters and ARP 12 pt. adjuster nuts also included as well. All shaft rockers and hardware are slightly used, in very nice shape and also free of any damage or repairs.
Why buy new??? For this exact set-up assembled new, you're looking at $5,000 bucks plus. But not here... Not today! Pick up this set right here for almost half price! And have an extra $2300 bucks left over to spend elsewhere! Race more, spend less, repeat! GoNitrolink.com
Priced to move at: Only $2695.00
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Co2 Air Bottle
If you're limited on space, or just like the sleek look of this small size Co2 Air Bottle then lets continue! This one's slightly used, made of light weight aluminum and anodized black for that cool stealth look. It measures 2" in diameter, by 16" long and weighs in at 2 pounds empty. It can be used with a number of different applications to include air shift Lenco's or B&J transmissions, air timers, air shut-off switches, etc. Another "Nitrolink" super saver item to help racers on a budget keep doing what they do best!
Co2 Air Bottle
Anodized black for that awesome stealth look!!! This slightly used Co2 Air Bottle is ready to go on tour with your race team as soon as you click "Buy it Now! This one measures 9 3/4" tall including the valve, with a 3" diameter. Both the bottle & valve are in nice shape with no damage or repairs. And the anodized finish is exactly what's needed to make this quality component look that much better! Racers helping Racers do what they do best! GoNitrolink.com
Complete 426 Hemi Short Block
Now here's a very special offer for all you racers out there on a budget looking to score big time on a slightly used Complete 426 Hemi Short Block. And the best part about this deal is everything is being sold not assembled, so you have peace of mind knowing everything was put together your way. This package deal is sure to save you countless hours not having to round everything up separately. And also save you plenty of hard earned $$$'s not having to pay retail elsewhere. It includes an aluminum block, billet crankshaft, gear drive, pistons, rods, and much more. This set-up could work on your A/Fuel Dragster, Alcohol Funny Car, Blown Altered, Drag Boat, Tractor Puller and so on... This is the perfect opportunity to outfit your ride with quality components. And get it all done in one place!!!
Keith Black 426 Hemi Stage 15 Block: Normal minimal wear, standard deck, standard mains, 48 degree raised cam, 4.250 sleeves, .904 lifter bore size, accepts you're 9/16" size head studs (not included), professionally repaired (see photos) not been run since, line bore, cam journals and main caps are good to go. This block is definitely ready to go to work!!!
Sonny Bryant Billet Crankshaft: Slightly used, nice shape, recently inspected and not been run since, free of any cracks or damage, dual keyed style, 3.750 stroke, standard mains.
RCD 426 Hemi Gear Drive: Slightly used, nice shape, no visible damage or repairs.
Bullet Camshaft: Brand new, 48 degree, standard 54mm cam journal size.
CP Carrillo Pistons: Brand new, set up to work with the 4.250 bore size sleeves above, 1.520 compression height, with brand new 1.094 size pins & buttons, brand new piston rings.
CP Carrillo Aluminum Rods: Brand new, 7.310 length size. Pull this fresh set right out of the box and know exactly what's in your fresh build right out of the gate!
Bullet Lifters: Slightly used, .904 size.
Clevite Bearings: Brand new for connecting rods and main cap bearings to make sure you have everything necessary to finish the job...
Dan Olson Oil Pan: Slightly used, no damage, wet sump style.
As you probably know, you could easily spend right at $17,000 to duplicate a set-up similar to this one. And then spend months shopping around trying to line up all the different components that are included in this very special package. But not here... Not today! This complete package is available immediately. Will sell for thousands less than the price of new. And ready to ship out today!
Package Deal!!! Priced to move at Only: $10,950. OBO + shipping.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
We all know the importance of having a good clutch program in place and how setting your race car up with the correct components right from the start can save you countless hours in the pits, multiple runs on the track and a whole lot of frustration. And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Funny Car, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape. And in fact, has only 1 burnout on it since it was inspected. This one's the 10.7 size, equipped with the lighter weight aluminum pressure plate, flywheel and upgraded titanium donut. It's set up to run 3 disks (not included) and is the 6 stand model with the popular big stands and titanium adjusters. This set-up was recently certed, and is ready for showtime!!!
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch... Then be prepared to spend right at $5,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for half the cost of new, making this the perfect opportunity to save thousands!!!
Available immediately and priced to move.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape and has not been run since it's last inspection. This one's the 10" size, equipped with the lighter weight aluminum pressure plate, flywheel and donut. It's set up to run 2 disks (not included) and is the 6 stand model with 1/2" studs, with all adjusters included made of titanium.
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch. Then be prepared to spend right at $3,500 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for way less than the cost of new so don't delay, order today!
Priced to move at: Only $1695.00
DJ Blower Bag & Restraint
Check out this upgraded DJ Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with fresh cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are brand new and free of any damage, rips, or scorching. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 19 3/4" long not including the small front tab (see photo) by 9 1/4" wide. With the Blower opening measuring 8 3/4" long by 4 3/8" wide. Also included are (4) Header Brackets and Pins that are brand new and ready for fresh mounting holes. PLEASE NOTE: Extra rear bellhousing bracket/pin and bottom plate (sold separately). So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $2,400 bucks! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
Priced to move at Only: $1850.00
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Don Jackson BDK Valve
When it comes to fuel or air flow management a Don Jackson BDK Valve is one of the most dependable and easiest ways to get the job done right! This ones slightly used, made of light weight billet aluminum and anodized black. It measures 9" tall and both the inlet/outlet are ready to accept your #10 size hose fittings (not included). It allows you to regulate fuel pressure making it easier on your fuel pump. Or they can also work in conjunction with your clutch management system by allowing you to adjust air pressure. In either application, just a simple turn of the valve on top does it all... They can work with any nitro, alcohol, or gas set-up's and this one's in excellent shape and free of any damage or repairs.
Why buy new??? If you've had a chance to shop around for a new Jackson BDK lately, then be prepared to pay between $750 to $950 depending on the size!!! But why even think of doing that when you can pick up this slightly used one right here... And save several hundred bucks at the same time!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster Dual Chute Mounts
We have a few sets of slightly used Dragster Dual Chute Mounts at the race shop available and ready to ship today! They're sold in pairs, made of chrome moly tubing and anodized black for that cool stealth look. Tube diameter measures 7/8" total. And both weigh in at a light weight .7 pounds. They can be welded up as is, or fit inside your existing slightly larger size diameter tubing. Then held in place by your common style quick release pins, (not included). Then removed with your chute packs, etc; to allow you to pack both chutes on the ground, on top of a milk crate, etc; for a quick, easier pack. Another money saving item to help racers on a budget get to the winners circle!
Sold in sets.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster/Altered Headers
Check out this awesome looking set of Dragster/Altered Headers up for sale today! This set looks to be from either Triple T Race Products, or Hedman Headers. And could look great on your Top Fuel or Alcohol Dragster, AA/Fuel Altered, Drag Boat, Tractor Puller and so on... They're slightly used and in very nice shape with no visible damage. And set up to work with your 426 Hemi fuel heads made by Alan Johnson (up to Stage 5), or any BAE, or Dart, fuel heads. Tube diameter is the popular 2 1/2" size, with the standard degree bend. And this set is equipped with EGT bungs already installed to accept your Racepak or similar computer probes. Or, just cap them off if you're not running a computer. Both quality and craftsmanship are present here as you check out the built in separation plate design in between each pipe and the support rods added for extra strength and durability. And here's an extra added bonus to make the deal that much better! We'll throw in a complete set of (4) header brackets ready to accept you're blower restraint straps. Just add your own standard size release pins and head for the lanes!
Please note: This set will not fit if you're running "Fatheads."
Enderle Buzzard Injector
Anodized black for that awesome stealth look!!! And that only makes it easier to imagine how cool this Enderle Buzzard Injector would look bolted up to your ride! This one's slightly used, in great shape with no damage or repairs. And ready to offer it's new owner that iconic look that will never go out of style. Freshly anodized and ready to install, this injector has mounting holes that measure the standard 15 1/4" x 4 3/8" center to center with the bottom opening measuring 15" x 4 7/16" total. And it comes loaded with throttle arms and throttle stops also included as well. The large 5" size butterflies are in great shape allowing the throttle shaft to operate nice and smooth with no binding. And if you need a super trick Billet Starting Line Air Bleed Valve to go with it (sold separately)... We can do that too! Quality Racing Components 24/7 right here... GoNitrolink.com
FIE Hemi Magneto & Coil
Recently tested and ready for showtime allows you to buy this slightly used FIE Hemi Magneto & Coil with confidence right here at Nitrolink!!! And if you're running a Nostalgia Top Fuel Dragster or Heritage Series Nostalgia Nitro Funny Car, then you're on track to save big time! This 10 amp points style magneto, with a CCW rotation was recently tested good to go and not been run since. It's equipped with the popular Dunn style cross-drive, slightly used rotor and brand new cap. The slightly used FIE large size Coil that's also included was recently tested as well and comes with a billet mounting bracket for a quick easy installation. For this exact set-up brand new, expect to pay right at $2300 bucks! But not here... Not today! Save more, race more, win more! Gonitrolink.com
