Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape and has not been run since it's last inspection. This one's the 10" size, equipped with the lighter weight aluminum pressure plate, flywheel and donut. It's set up to run 2 disks (not included) and is the 6 stand model with 1/2" studs, with all adjusters included made of titanium.
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch. Then be prepared to spend right at $3,500 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for way less than the cost of new so don't delay, order today!
Priced to move at: Only $1695.00
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster Dual Chute Mounts
We have a few sets of slightly used Dragster Dual Chute Mounts at the race shop available and ready to ship today! They're sold in pairs, made of chrome moly tubing and anodized black for that cool stealth look. Tube diameter measures 7/8" total. And both weigh in at a light weight .7 pounds. They can be welded up as is, or fit inside your existing slightly larger size diameter tubing. Then held in place by your common style quick release pins, (not included). Then removed with your chute packs, etc; to allow you to pack both chutes on the ground, on top of a milk crate, etc; for a quick, easier pack. Another money saving item to help racers on a budget get to the winners circle!
Sold in sets.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster/Altered Headers
Check out this awesome looking set of Dragster/Altered Headers up for sale today! This set looks to be from either Triple T Race Products, or Hedman Headers. And could look great on your Top Fuel or Alcohol Dragster, AA/Fuel Altered, Drag Boat, Tractor Puller and so on... They're slightly used and in very nice shape with no visible damage. And set up to work with your 426 Hemi fuel heads made by Alan Johnson (up to Stage 5), or any BAE, or Dart, fuel heads. Tube diameter is the popular 2 1/2" size, with the standard degree bend. And this set is equipped with EGT bungs already installed to accept your Racepak or similar computer probes. Or, just cap them off if you're not running a computer. Both quality and craftsmanship are present here as you check out the built in separation plate design in between each pipe and the support rods added for extra strength and durability. And here's an extra added bonus to make the deal that much better! We'll throw in a complete set of (4) header brackets ready to accept you're blower restraint straps. Just add your own standard size release pins and head for the lanes!
Please note: This set will not fit if you're running "Fatheads."
Enderle Buzzard Injector
Anodized black for that awesome stealth look!!! And that only makes it easier to imagine how cool this Enderle Buzzard Injector would look bolted up to your ride! This one's slightly used, in great shape with no damage or repairs. And ready to offer it's new owner that iconic look that will never go out of style. Freshly anodized and ready to install, this injector has mounting holes that measure the standard 15 1/4" x 4 3/8" center to center with the bottom opening measuring 15" x 4 7/16" total. And it comes loaded with throttle arms and throttle stops also included as well. The large 5" size butterflies are in great shape allowing the throttle shaft to operate nice and smooth with no binding. And if you need a super trick Billet Starting Line Air Bleed Valve to go with it (sold separately)... We can do that too! Quality Racing Components 24/7 right here... GoNitrolink.com
FIE Hemi Magneto & Coil
Recently tested and ready for showtime allows you to buy this slightly used FIE Hemi Magneto & Coil with confidence right here at Nitrolink!!! And if you're running a Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Altered, Drag Boat, etc; then you're on track to save big time! This 7.86 amp points style magneto, with a CCW rotation was recently tested good to go and not been run since. It's equipped with the popular Dunn style cross-drive, slightly used rotor and brand new cap. The slightly used FIE large size Coil that's also included was recently tested as well and comes with a billet mounting bracket for a quick easy installation. For this exact set-up brand new, expect to pay right at $2300 bucks! But not here... Not today! Save more, race more, win more! Gonitrolink.com
Fowler F-11 Billet 6-71 Blower
Half off the price of new for a state of the art Supercharger is what you're looking at here, with this slightly used Fowler F-11 Billet 6-71 Blower that was just freshened up at the Blower Shop, with zero runs... Install this one right out of the box, then tow to the lanes! It's equipped with an upgraded billet case, along with quite a few extra's added in to make the deal that much better! Let's start with the upgraded 12 bolt billet blower snout that measures 3 13/16" long. The billet aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear and loaded with brand new teflon strips already installed. And brand new front seals are also included as well. Top opening measures 9 3/4" long x 4 15/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the popular small delta style front opening for optimum efficiency... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $10,000 bucks to make it happen!!! But not here... Not today! Get this one on the truck and headed your way with one phone call... Then figure out where to spend that extra $5,000 bucks you just saved right here by not buying new elsewhere! The road to the winners circle is shorter than you think! GoNitrolink
Priced to move at: Only $4995. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Fowler F-11 Cast 6-71 Blower
A top of the line racing component at better than half off the price of new!!! Is exactly what you'll find right here with this slightly used Fowler F-11 Cast 6-71 Blower that was just freshened up at the Blower Shop, with zero runs! This one's ready to be pressed into service right out of the box and equipped with quite a few extra's added in to make the deal that much better! Let's start with the 6 bolt billet blower snout that measures 3 13/16" long. The cast aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear, with brand new teflon strips already installed. And we'll also include a set of brand new gears and front seals as well. Top opening measures 7" long x 4 7/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the standard square opening... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $9,000 bucks to do it!!! But not here... Not today! This one's in stock and ready to ship with one phone call... Then figure out where to spend that extra $5,100 bucks you just saved right here by not buying new elsewhere! Save more, race more, win more! GoNitrolink.com
Priced to move at: Only $3895. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Fuel Pump Inlet
If you're running a fuel pump that utilizes a screw in style Fuel Pump Inlet like this one, then step right up! This one's slightly used, made of light weight aluminum and anodized black. It's equipped with a -16 AN o-ring fitting on one side and a 1 1/4" size inlet on the other. Check here first for other hard to find replacement components like this one and get ready to save!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Funny Car Body Pole
If you're running a nitro or alcohol funny car then you'll want to make sure a Funny Car Body Pole like this one is in the trailer before you hit the road! And if you're looking to save some hard earned cash by not having to buy new elsewhere, then once again, Nitrolink has you covered!!! This one's slightly used, professionally made and ready to go on tour right out of the box... It's free of any damage or repairs and has a saddle measurement of 14" center to center on both the top and bottom. With a standard set-up that will accommodate your 3/4" size tubing on the top (tree side). And 1" size tubing on the bottom (chassis side). And height can be adjusted to measure 55", 66", or 76" from the ground up by setting the removable push pin that's also included. And it disassembles quickly to make it more compact for easier storage when not in use. Popular hard to find money saving racing components right here 24/7... GoNitrolink.com
Gibson-Miller Blower Front Cover & Snout
When it comes to outfitting your race car with hard to find replacement components just like this slightly used Gibson-Miller Blower Front Cover & Snout then you're definitely going to want to check back often right here! This money saving package is in nice shape, free of any damage or repairs and offers an anodized aluminum front cover, light weight 6 1/2" magnesium snout, starter bracket, 1 1/4" diameter (24 spline) coupler and ARP 12pt. mounting hardware all for one low price! Save more, Race more, Win more... GoNitrolink.com
Gibson-Miller Blower Rear Cover
If you're looking for those hard to find replacement components like this slightly used Gibson-Miller Blower Rear Cover then lets get this one on the way to your race shop quickly... And save you some hard earned cash at the same time! It's in great shape, free of any damage or repairs, is made of light weight magnesium and also includes all the ARP 12pt. mounting hardware needed to get the job done right... Unmatched customer service, right here! GoNitrolink.com
Impact -20 Fire Suit
If you're a tall size Driver trying to make your budget go a little further, then why not put "Nitrolink" to work and let us help you get to the race track that much quicker! This slightly used Impact -20 Fire Suit is the one piece style, made of black nomex that comes complete with arm restraint loops included. It's free of any patches or company logos for a clean appearance. And is a size x-large with a chest measurement of 41", a waist outside measurement of 37" and an inseam measurement of 27" total. It's free of any damage or repairs and guaranteed to re-cert or your money back... So, let's price it accordingly so you can pay for a new fresh cert and still be money ahead... Race for less at GoNitrolink.com
