Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD 426 Hemi Offset Mag Drive
How about a nice clean profiled product that's sure to offer that professional look your race team is known for! This slightly used RCD 426 Hemi Offset Mag Drive is in excellent shape and free of any damage with normal minimal wear. It's made of billet aluminum and can work with your TFX, BAE, Keith Black, or JP1 cast or billet blocks. And equipped with the RCD style gear, steel shaft with a 5/16" size hex for your oil pump and bronze gear, all in very nice condition. Brand new, these go for right at $1350 bucks! But not here... Not today! Install this one right out of the box, set your mag, then pull to the lanes! Helping your team race for less, is what we do best! GoNitrolink.com
RCD Blower Starter
When it comes to "go time" on the starting line, then lets get this awesome looking super clean RCD Blower Starter pressed into service on your race team today! This one's slightly used and in great shape with very little normal minimal wear. It's the late model style, that's outfitted with a billet starter cage that's anodized black for that awesome look! It features the larger current style solenoid, starter switch and upgraded black plug that accepts any of the other color Anderson plugs on your starter cables. And check out the new built in stand on the bottom, to keep it upright to help avoid costly damage from rolling around in your tow vehicle or trailer during transport. All these features included for one great price! We only have one available for now... So, grab this one up right here and keep that extra $500 bucks in your pocket where it belongs not having to buy new elsewhere!
Winning "Starts" Here!!! GoNitrolink.com
Priced to move at: Only $2950.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD Snout Clamp Belt Guard
Quality and craftsmanship is offered right here with this slightly used RCD Snout Clamp Belt Guard that's ready to install to make your ride look even more state of the art!!!
And while we're at it... Let's save you some hard earned cash right here so you don't have to spend over $600 bucks for a new one! This one's in very nice shape and free of any damage or repairs. It's the current, heavy-duty style that's made of billet aluminum and anodized black for that awesome look. And was designed to work with any brand of blower snout that measures 6" or longer, and has a 3 1/2" diameter. It also includes a built-in starter bracket, weighs in at a light weight 2.2 lbs. And can be installed or removed quickly utilizing the 2 allen bolts at the bottom... Save, Race, Win, Repeat! GoNitrolink.com
RCD Valve Cover Breathers
Let's get you set up with this slightly used set of quick disconnect RCD Valve Cover Breathers that are the popular 1 1/4" size. And could work on pretty much any application out there requiring a breather set-up. And what's cool about this set is that they're equipped with the super trick locking pin set-up that helps keep the hose end connectors from twisting loose during competition. And as you can see by the photo's, this set is in almost new condition, free of any cracks, or repairs with very little minimal wear. Mounting plates are the standard pattern as far as these go. And hose ends work with your 1 1/4" diameter hose size. (Hose sold separately.) Brand new price for a pair identical to these will set you back right at $369 Bucks... But not here! Click on the "buy now" button below and start saving! Helping racers do what they do best... For less! GoNitrolink.com
Slightly Used
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts
Now here's a smoke'n deal that's sure to help get all our valued customers on a budget ready for race day! We have a large supply of RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts for sale and ready to ship! These are the stronger nitro kevlar models, that work with the 11mm pulleys and measure 84mm wide, have a 145 tooth count, with a GT tooth profile. They're slightly used and free of any visible damage, weather checking, or chaffing. Outside edges are nice and sharp with no fraying or visible wear. All teeth are free of any damage and ready to go to work! Brand new these sell for right at $280 bucks each. So if you need one, here it is! If you have one, don't leave home without a spare!!! Priced to move at only: $99.95 ea.
Slightly Used RCD Starter Dog
Keeping your Starter Dog in good shape not only helps extend the life of your Blower Starter. But also help insure there are no unexpected problems on the starting line when it comes to firing your race car... So, let's get your team set up with this Slightly Used RCD Starter Dog so you don't have to go spend over $150 bucks for a new one! This one's the popular 6 bolt style, and is equipped with the 1/2" drive slot for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's in nice shape, strong, made of billet steel and installs quickly using your hardware. So if you need one, here it is... If you have one, don't hit the road without a spare! GoNitrolink.com
TAK Titanium Header Brackets
GoNitrolink.com for both racing products and customer service taken to the next level! And if you're looking for some state of the art TAK Titanium Header Brackets that will perform on the racetrack as well as they look, then your shopping in the right place! These are slightly used, made of light weight titanium and profiled like no other set on the market. They install easily on your header studs on your cylinder heads and work in conjunction with your blower restraint set-up. They're sold separately and if you need the exact size quick release pins that go with these brackets, we can do that as well! Order both quickly and easily right here!
Price: Only $79.00 each.
Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
Turn-Key Race Trailer
If you're looking for a nice, dependable basic style race trailer to get you back and forth to the races without all the expensive bells & whistles, then take a look at the "budget friendly" price on this one...
This Turn-Key Race Trailer is slightly used, in nice shape and outfitted with just the right amount of options to not only keep the cost down. But also offer your race team the "important" tools required to transport your valuable cargo efficiently to the next event. It tows straight, is white in color and ready for your sponsor's logo, lettering, or vinyl wrap if you choose... So let's get to it!!!
About the Trailer...
2014 Continental Cargo 28' Race Trailer
• Usable Floor Space measures: 306" long x 81" wide (between fender wells)
• Rear Door measures: 95.5" wide x 80" tall
• Double Side Doors measures: 77" tall x 46" wide
• Multiple Overhead Aluminum Cabinets
• Drivers Fire Suit/Helmet Cabinet
• Aluminum Work Bench 71" long x 23 1/2" deep
• Roof Air Conditioner
• Tool Boxes
• 12v Interior Lighting & 110V Outlet
• Multiple Floor Tie Down Anchors
• Multiple Side D-Ring Anchors
• Coin Flooring
• Fuel Jug Holder
• Tie Down & Aerosol Can Holders
• Spare Tire Compartment in Floor
• Adjustable Roof Vent
• Fold Down Cable Assist Rear Door
Fold Up Aluminum Ramp 3' long x 80" wide
• Side Door Aluminum Step
• LED Outside Pit Lighting
• Outside 110V Outlet
• Dual Axles
• Custom Aluminum Wheels
• Electric Brake System
• Electric Trailer Jack
• And Much More...
This complete basic style Race Trailer is turn-key, race ready and available immediately. And is sure to save its new owner thousands of dollars from buying new. And countless hours not having to set one up from scratch... Now you're ready to hit the road and join the 2026 season!!!
Priced to move at: Only $18,500 OBO
For more info, or to see in person call Brandon at: (916) 425-1427 anytime!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used 13.9mm 31T Blower Pulley
Save a few bucks here with this nice Used 13.9mm 31T Blower Pulley that's ready to bolt on and go racing! This one's the GT style, made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used 13.9mm 64T Blower Pulley
How about a nice Used 13.9mm 64T Blower Pulley that's ready for showtime! This one's the GT style, made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
