Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Alan Johnson Slide Valve
If you're running a larger size fuel system on your nitro burning dragster or funny car, then this slightly Used Alan Johnson Slide Valve is a good option if you're on a tight budget when it comes to fuel management. This ones the stage 1 model, that accepts your -10 size fittings. It's in great shape, made of billet aluminum and works in conjunction with your BDK or AL Valve. Order quality racing components 24 hours, 7 days a week right here!
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Price
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Total
$1,199.99 – $1,354.98Price range: $1,199.99 through $1,354.98
Pneumatic Valve Spring Compressor Tool
Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you're looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It's two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6" ID jaw adapter, however can also be ordered with a larger 1.740" ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2" screw adjustment allows for a 7" to 8-1/2" throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!
Choose the standard 1.6" ID jaw, or upgraded 1.740" ID size in the "options" menu below.
Price
$439.95 – $598.95Price range: $439.95 through $598.95
Total
$439.95 – $598.95Price range: $439.95 through $598.95
"Nitrolink" offers a complete line of all Littlefield Products.
Littlefield Polished Blower Snouts
When it comes to blower components, it's not always a smart move to go with the least expensive brands available. Because on the race track, horsepower always finds the weakest parts, right! So lets offer top of the line quality at a fair price right here with these
Littlefield Polished Blower Snouts. Made of aircraft-grade billet aluminum and available in a variety of sizes sure to fit your specific application, these premium snouts are available in 3 7/8", 5 1/8", 6", 7" and 8 5/8" lengths. They're loaded with a double-ball bearing and equipped with premium oil seals. The shaft is made from 4100 heat-treated steel delivering one of the strongest and most reliable on the market. These high performance blower snouts have consistently proven themselves over the years that they can stand up to the most demanding racing conditions, then be ready for the next round!
Choose Snout Length needed in the "options" menu below.
Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Large
Another budget friendly high performance component would be this slightly Used AFT Slide Valve - Large style, designed for the larger size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Fuel management at a deep discounted price, right here!
Another BRAND NEW item... Without the brand new price!!!
RCD Fuel Pump Extension
A successful race team watches every dollar spent... So, lets help save you a few bucks right here with this brand new RCD Fuel Pump Extension that's ready to perform just as well as it looks! This one's made of billet aluminum and is the 3" size that works in conjunction with your RCD gear drive front cover and fuel pump extension drive shaft, that runs off your cam gear (both sold separately). Another quality race product to help your racing budget go a little further! GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Weld Racing Beadlock Rings
Now here's an excellent opportunity to score on a complete set of slightly Used Weld Racing Beadlock Rings to take care of both wheels! And while we're at it, lets save you some hard earned cash at the same time! These are for the 16" wheels that utilize 24 mounting bolts (not included). They're in very nice shape with no damage or repairs and work with your 5/16" size bolts. The polished finish is in great condition and this complete set of beadlock rings is ready to perform just as nice as they look!
Includes 4 pieces total.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Weld Racing Beadlock Rings
And if you need to replace both wheels with a complete set of slightly Used Weld Racing Beadlock Rings then we can do that too! These are for the 16" wheels that utilize 18 mounting bolts. They're in very nice shape with no damage or repairs and work with your 5/16" size bolts (not included). The gold anodized finish is in great condition and this complete set is ready to install right out of the box!
Includes 4 pieces total.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used AFT Slide Valve - Small
Lets get the job done for a lot less money, with this slightly Used AFT Slide Valve - Small style, designed for the medium size fuel systems to help with fuel management. This one's ready to accepts your -10 size fittings and is in great shape, made of billet aluminum and works in conjunction with your BDK Valve. Save time, save money, GoNitrolink.com!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Alan Johnson AL Valve
All nitro cars to the lanes please!!! And if you're running an AJPE slide valve, then you're going to want to take a look at this very nice Used Alan Johnson AL Valve to complete the package! This one's in nice shape, free of any damage and regulates fuel pressure, or isolates your fuel system and acts similar to an accelerator pump. It's equipped with -12 fittings on the side and -3 fittings on the t-fitting at the bottom. It's used in conjunction with your A.J. slide valve and is fully adjustable to accommodate different fuel pressure ranges. Save money, save time! GoNitrolink.com
We offer a complete line of all Lenco products!
Billet Drive Shaft Cover
When unmatched quality and craftsmanship is what you're looking for, then check out this brand new Billet Drive Shaft Cover that's ready to offer that and a whole lot more! This one's made by Lenco and set up to work with either the CS-1, or CS-2 style transmission. It's anodized black for that awesome look with the complete unit measuring 8" long including the flange. The tube cover itself measures 6" long and has a 3" inside diameter. It can be installed or removed quick and easy in your front engine dragster, funny car, altered, etc; in between rounds on race day. And includes the transmission flange, driveshaft cover, stainless clamp with safety pin and transmission housing rear seal... And don't forget about the unmatched customer service! GoNitrolink.com
Please choose your Output Shaft size (32 Spline or 35 Spline) in the "Options" menu below.
