111 ITEMS
Sort
Billet Spark Plug Gap Tool
This light weight anodized Billet Spark Plug Gap Tool is the perfect item to outfit your race team with right before you hit the road! This handy high quality tool is a must if you're looking to save time at the race track. Comes complete with a side strap to open plug gap if needed. And allows you to breeze thru setting gap on a large or small amount of plugs in no time! Helping your team organize for the race weekend is what we do best! GoNitrolink.com
Price
$59.99
Total
$59.99
Billet Speed Handle - Valve Spring Compressor & Tester
Here's another item to help streamline your racing operation by providing quickness and leverage! This brand new Billet Speed Handle - Valve Spring Compressor & Tester works in conjunction with the bench top valve spring tester, or on-head valve spring compressor tools that are also available on our website. It's made of billet aluminum and equipped with a rotating contoured knob for optimum comfort while in use. It measures 6" long with (2) 7/16" hex positions, with the outside hex having a deep counter bore to help release the valve locks when used with the valve spring compressor tool. Add this handy time saving specialty tool to your shopping cart, then be ready for race day that much quicker!
Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
Price
Price range: $99.95 through $119.95
Total
Price range: $99.95 through $119.95
Clutch Pack Line-Up Tool
Lightweight aluminum and ready to be pressed into service, this Clutch Pack Line-Up Tool is machined to the highest quality and anodized black for quick easy clean up. And designed to fit like a glove when it comes to lining up all your clutch disks to accept your input shaft or transmission. They can be ordered in 3 sizes, 1 3/8", 1 3/4", or 1 7/8" 10 spline, to work with either the large or small size pilot bearing. One more quality race tool to match your quality race team!
Compact Valve Core Tool
No rocket science here! Just one more well made quality tool to add to your racing operation! This brand new Compact Valve Core Tool is made of billet aluminum and equipped with a steel tip for durability. It's knurled on one end and drilled for your key chain, etc; on the other. It's small, light weight and not a bad idea to have with you while you're waiting in the lanes... Just in case!
Connecting Rod Vise
As we all know, aluminum rods can be a handful to hold on to while your servicing them in between rounds, or back at the race shop... So how about a solution! This super handy Connecting Rod Vise was designed to securely hold one or more of your aluminum rods while you service them, to help prevent the risk of damage. It's perfect for removing the caps, inspecting or changing rod bolts, checking rod clearances, polishing, or machining. It's strong, durable, made of billet aluminum, anodized black and can be permanently mounted to your work bench, or used with your shop vise. Inside working area is approx 4 3/4" x 2" with an overall height of 10" total by 7" wide, by 2" deep. Order one today... Problem goes away!
Price
$145.99
Total
$145.99
Dial Indicator Kit for Valve Spring Tester
If you're thinking about purchasing one of the Bench Top Valve Spring Testers we sell, or already have one... Then check out one of these brand new Dial Indicator Kit for Valve Spring Tester that can be easily added for optimum precision accuracy. It's allows you to check your installed height, or coil bind while you're testing for spring pressure without having to do it old school by using a micrometer. It installs quickly with a very small amount of light grease and your 3/16" hex with a 7/16" open end wrench to set the stop. Check out all the other specialty pit tools available right here, designed specifically to make your job that much easier!
Valve Spring Tester (in photo) sold separately.
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Dual Feeler Gauge Handles
It's all about choices for our valued customers! So, here's one more style of billet Dual Feeler Gauge Handles to consider if you prefer using the small style that holds 2 separate gauges on the same handle. They're strong, durable and made of billet aluminum to help run thru a set of valves quickly without having to fumble with 2 separate gauges . They measure 3" x 1.25" x .5" total and can accept various sizes of 1/2" wide feeler gauges (not included) depending on your application. They're sold separately and can be stacked 3-4 gauges high if you choose. Ordering made simple, 24/7 right here on our website! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Enderle Throttle Arm - Double End
Keep that blower injector performing at its best with this brand new Enderle Throttle Arm - Double End. This one can be ordered in either 5/16" splined shaft size for Bugcatcher Injectors, or 7/16" size for Bird or Buzzardcatcher Injectors. It's made of light weight billet aluminum and anodized black for that stealth look... GoNitrolink.com for all your high performance replacement parts!
Choose shaft size needed in the "options" menu below.
Price
Original price was: $190.00.$150.00Current price is: $150.00.
Total
Original price was: $190.00.$150.00Current price is: $150.00.
Fire Bottle Actuator
It never hurts to carry around a few items you never think you'll ever need! And now that you've seen this brand new Fire Bottle Actuator right here... Well you know the rest! This one's from DJ Safety and equipped with a billet aluminum actuator arm. It's light weight, installs quickly and takes up very little space in your trailer while it waits to be pressed into service. GoNitrolink.com for all your hard to find spare items, so you're locked & loaded for race day!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Fuel Pump Inlet
If you're running a fuel pump that utilizes a screw in style Fuel Pump Inlet like this one, then step right up! This one's slightly used, made of light weight aluminum and anodized black. It's equipped with a -16 AN o-ring fitting on one side and a 1 1/4" size inlet on the other. Check here first for other hard to find replacement components like this one and get ready to save!
There’s only 2 places you can go to get your “Official Nitrolink Racing Gear” and that would be either in our pit area, or right here on our website!
Check out these awesome looking Nitrolink Racing T-Shirts that are being offered right here before you can even get them at the race track… This first addition design is available at a lower than normal price to help introduce our brand new website and services to all or valued customers! These high quality custom printed shirts are made of 100% cotton and come in black with multi-color printing on both the front and back. Join our winning team today and show everyone you know exactly where to go for high performance nitro and alcohol racing components! GoNitrolink.com
