Alan Johnson Stage 1 Nostalgia Cylinder Heads
Check out this "complete" set of Alan Johnson Stage 1 Nostalgia Cylinder Heads then you'll know one of the reasons why many of the top nostalgia nitro teams on tour are laying down those kind of numbers on race day! This set is the current style, popular because they utilize the smaller intake & exhaust runners making them perfect for use in Nostalgia Top Fuel, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is the single plug style, set up to run 4 spark plugs per head. Both are in excellent shape and work with your standard deck TFX Rodeck, BAE, or Keith Black cast or billet block, using your standard deck fuel head style manifold. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in nice shape. And they're loaded with a slightly used set of Victory 2.375 titanium intake and Manley 1.925 exhaust valves, with Victory locks & retainers. And a set of Manley Dual Intake and PAC Triple Valve Springs are also included as well. Plus, we'll include a complete set of inner head studs, intake manifold studs, header studs and valve cover studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running... So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is complete, available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $4500.00 set.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
BAE 426 Hemi Fuel Heads
Check out this "complete" set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They're the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16" stem). And Manley inconel 1.925 exhaust valves (3/8" stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we'll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $3895.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
AJPE Billet 392 Hemi Heads
Serviced and ready to run!!! Is exactly what you'll find when this "complete" set of
AJPE Billet 392 Hemi Heads show up on your doorstep! This slightly used set is in great shape and free of any damage or repairs. And ready to work with your 6 bolt style intake manifold. They're loaded with a slightly used set of beadlock groove Manley 2.125" diameter titanium intakes that measure 5.350" long (5/16" stem). And a set of square groove Manley inconel 1.870" exhaust valves that measure 5.260" long (11/32" stem) with Manley titanium 10° locks & retainers. Plus, a slightly used set of PSI Triple Valve Springs are also included as well. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And we'll include a complete set of header & intake manifold studs to make this hard to find package even better! And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The Coolest Race Parts on the Planet + Unmatched Customer Service = GoNitrolink.com
Priced to move at: Only $3995.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Price
$8.40 – $18.30Price range: $8.40 through $18.30
Total
$8.40 – $18.30Price range: $8.40 through $18.30
Rocker Adjuster Nuts
...And if we offer the adjusters here on GoNitrolink.com then we better offer these brand new Rocker Adjuster Nuts to go with them, right! This popular item comes in your choice of either 3/8" or 7/16" size and works in conjunction with your rocker adjusters on your Stage 5, BAE, Manton, Reid, Arrow, Cluff, etc; rocker arms. They're top quality precision machined, made in the U.S. and ready to help keep your rocker arms properly adjusted so you can put down a number!
Choose either 4 total, or 8 total in the "options" menu below.
Cylinder Head Intake Runner O-Rings
GoNitrolink.com for all your consumables! And we'll help save you both time and money by offering products like this brand new set of (8) total Cylinder Head Intake Runner O-Rings to help keep everything sealed up so you're ready for the next round! And we'll make it super simple to order everything right here. Just a couple clicks and it's done!
Universal Parts Tray
Check out this Universal Parts Tray that's sure to help keep your race team efficient and organized on race day! This quality item is made of aluminum, so it can handle all the brake cleaner or parts washer solvent you can throw at it! And it works perfect under the engine when your bottom end technician is changing out bearings. Or when your cylinder head or clutch specialist is servicing those components on the work bench or on the ground. The outside edges measure the standard 17 3/4" x 26" total so it will stow away nicely under your pit table in between rounds. Or, in your race trailer during transport. Hard to find pit items available right here 24/7! GoNitrolink.com
Sold Separately
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change! This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your 9/16" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Extra Deep Clutch / Head Stud Nut Socket
Cool racing components taken to the next level... "Nitrolink" offers hard to find specialty pit tools like this one to all our valued customers to help make certain jobs easier and more efficient! So, lets offer this brand new Extra Deep Clutch / Head Stud Nut Socket that eliminates several problems at once by itself...
1. Completely does away with using an extension when re-torquing your head stud nuts delivering a more precise torque spec.
2. It extends past your rocker stands, shafts, etc; when removing or re-torquing your head stud nuts.
3. Extended length allows you to re-torque clutch stand nuts quickly and easily with the bellhousing on.
4. It extends past the bellhousing just enough to prevent from loosing it while re-torquing clutch stand nuts, doing away with having to use an extension.
This high quality tool is made to last from heat treated steel and measures 7" in length, to fit your 1/2" drive torque wrench, breaker bar, etc. And can be ordered in either 11/16" or 13/16" sizes to fit your 12 point nuts. Not intended for use with air or battery impact guns. Order one right here today... And it's on the way!
Economy Cylinder Head Holders
If you're a racer on a budget, then "Nitrolink" is always happy to help keep you out there going rounds! So, lets offer a brand new set of Economy Cylinder Head Holders ready to help do just that. These are made of durable steel and designed to hold your cylinder head with either side up. The tapered pins fit any size stud/bolt holes and loosen with a twist. They're perfect for changing valves or springs, or guide knurling, with plenty of clearance to remove arbors and reamers. They're compact and store away quickly and easily in your race shop or trailer. Efficiency counts on race day... So order a set today!
Price
$67.50 – $171.50Price range: $67.50 through $171.50
Total
$67.50 – $171.50Price range: $67.50 through $171.50
Hemi Rocker Adjusters
Here's another one of those small items that we don't want to see keep you out of the winners circle because you didn't have spares... So, let's keep that from happening with these brand new Hemi Rocker Adjusters that are available in either the pressure feed oiler (with side holes), non-oiler (with hole), or standard solid style, in your choice of either 3/8" -24, with a 5/16" ball size or 7/16" -20, with a 3/8" ball size. All are precision machined and ready to work with your Stage 5, BAE, Manton, Reid, Arrow, Cluff, etc; rocker arms. And if you're also looking for the correct nuts that fit perfectly on these adjusters, just scroll down this page and your there! Quality racing components and customer service taken to the next level! GoNitrolink.com
Please note: Custom sizes also available. Please call: (916) 425-1427 to order.
Choose size & either 4 total, or 8 total in the "options" menu below.
Fuel Head Valve Cover Gaskets
GoNitrolink.com for all your hi performance gaskets and consumables! And if you happen to be running AJPE, BAE, or Dart fuel heads, then you know exactly how to put these brand new Fuel Head Valve Cover Gaskets to work! These are made by Mahle and consist of a composite material, with a steel core and teflon coating on one side to help prevent oil saturation. They're NHRA nitro legal, measure .080" thickness and are sold as a pair. We offer a large selection of all the popular hi performance racing gaskets including cylinder head, exhaust, oil pan, blower and injector gaskets to make sure we have you covered for the weekend!
Choose either.1250" or .3125" stud hole size in the "options" menu below.
Fat Head Valve Cover Gaskets
GoNitrolink.com for all your hi performance gaskets and consumables! And if you happen to be running BAE fat heads, or AJPE muscle heads, then you know exactly how to put a set of these brand new Fat Head Valve Cover Gaskets to work! These are made by Mahle and consist of a composite material, with a steel core and teflon coating on one side to help prevent oil saturation. They're NHRA nitro legal, measure .080" thickness and are sold as a pair. We offer a large selection of all the popular hi performance racing gaskets including cylinder head, exhaust, oil pan, blower and injector gaskets to make sure we have you covered for the weekend!
