Price
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
Total
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
"Nitrolink" offers a complete line of all Dan Olson Race Products!
Dan Olson Top Fuel - A/Fuel Headers
Check out the photos on this brand new set of Dan Olson Top Fuel - A/Fuel Headers and then think of how awesome they would look on your Top Fuel or A/Fuel Dragster, Blown Altered, Tractor Puller, Drag Boat and so on... They can be ordered to fit any stage fuel heads or fat heads by Alan Johnson, BAE, Dart, etc. And are available in either 2 1/2", or 2 3/4" tube diameter with the standard degree bend. They can be set up with or without EGT bungs ready to accept your Racepak or similar Computer Probes if you're running them. And each set comes complete with lightened reinforcement tube gussets to complete this very nice package!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another BRAND NEW item... Without the brand new price!!!
Darton 4.187 Sleeves
And if you're running a TFX Hemi Billet Block with an .040 over-sized sleeve register, then lets get you set up with these brand new Darton 4.187 Sleeves that are being sold separately... And at a money saving price to help your racing budget go that much further! We have quite a few of these in stock right here, so click, pay and they're on the way! GoNitrolink.com
Other Sleeve Sizes available. Please call: (916) 425-1427 for more details.
Donovan Aluminum 565 C.I. Big Block Chevy
Brand new with zero laps!!! And equipped with all the best parts money can buy is exactly what you'll find right here with this Donovan Aluminum 565 C.I. Big Block Chevy that's being sold complete, turn-key and ready for showtime!!! No expense was spared in outfitting this Race Engine with everything needed to be competitive on the race track. And the great news is, it won't cost you anything close to the $50,000 bucks it cost to build it... So let's get to it!!!
About the Engine:
• New Donovan Aluminum 565 C.I. Big Block Chevy
• New Standard Deck, Water Block
• New Dart Pro 1 Cylinder Heads
• New Victory Titanium Intake & Exhaust Valves
• New Wiseco Pistons
• New GRP Aluminum Rods
• New Callies Crankshaft
• New MSD Crank Trigger System
• New Comp Cams Roller Camshaft
• New Isky Roller Lifters
• New Manton Pushrods
• New RCD Gear Drive
• New Jesel Shaft Rockers
• New Williams Valve Covers
• New Edelbrock Low Profile Manifold
• Enderle Birdcatcher
• Enderle Barrel Valve
• Enderle Fuel Pump
• MSD Ignition System
• Custom Zoomie Headers
• New Meziere Billet Flywheel
• New Meziere Heavy Duty Starter
• Dan Olson Custom Oil Pan
• And much more...
Don't miss this opportunity to acquire this turn-key race engine with brand new components for you're very own!!! This complete package is available immediately and sure to save it's new owner thousands of dollars not having duplicate everything here. Then countless hours not having to put it all together from the ground up... Now you're ready to go on tour with the right equipment for the 2026 season!!!
Priced to move at: Only $31K OBO. All serious reasonable offers considered.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster/Altered Headers
Check out this awesome looking set of Dragster/Altered Headers up for sale today! This set looks to be from either Triple T Race Products, or Hedman Headers. And could look great on your Top Fuel or Alcohol Dragster, AA/Fuel Altered, Drag Boat, Tractor Puller and so on... They're slightly used and in very nice shape with no visible damage. And set up to work with your 426 Hemi fuel heads made by Alan Johnson (up to Stage 5), or any BAE, or Dart, fuel heads. Tube diameter is the popular 2 1/2" size, with the standard degree bend. And this set is equipped with EGT bungs already installed to accept your Racepak or similar computer probes. Or, just cap them off if you're not running a computer. Both quality and craftsmanship are present here as you check out the built in separation plate design in between each pipe and the support rods added for extra strength and durability. And here's an extra added bonus to make the deal that much better! We'll throw in a complete set of (4) header brackets ready to accept you're blower restraint straps. Just add your own standard size release pins and head for the lanes!
Please note: This set will not fit if you're running "Fatheads."
Price
$179.99 – $259.99Price range: $179.99 through $259.99
Total
$179.99 – $259.99Price range: $179.99 through $259.99
"Nitrolink" offers a complete line of all Enderle Products!
Enderle BBC Front Cover
Now here's an item that all you Big Block Chevy racers out there on a budget can definitely get some use out of! This brand new Enderle BBC Front Cover offers both performance and nostalgic style! It's made of cast aluminum with built in ears to block off the water pump ports for a finished look. Or if you choose, simply remove them all together. This cover uses a standard BBC front seal (sold separately). Add one of these to your shopping cart right here... A couple clicks after that and it's on it's way!
Choose cast aluminum or polished finish in the "options" menu below.
Price
$179.99 – $239.99Price range: $179.99 through $239.99
Total
$179.99 – $239.99Price range: $179.99 through $239.99
"Nitrolink" offers a complete line of all Enderle Products!
Enderle SBC Front Cover
All you Small Block Chevy racers out there on a budget are sure to appreciate this brand new Enderle SBC Front Cover when it comes to performance and a little nostalgic style! It's made of cast aluminum with built in ears to block off the water pump ports for a finished look. Or if you choose, simply remove them all together. The large crank opening will accommodate a small block crank with a big block snout if desired. Front seal sold separately. Add one of these to your shopping cart right here... Then get your tools ready!
Choose cast aluminum or polished finish in the "options" menu below.
We offer a complete line of all Pit Pal products!
Engine Lift Sling
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And if you're running a blower or tunnel ram, then let's get you set up with a brand new Engine Lift Sling just like the one to make that job a whole lot easier! This sling is definitely one nicest on the market and plated for long lasting finish. It has a 1,000 lb. weight capacity and equipped with 4 polyester strap that measure 22" long. Simply hook it to your engine puller and attach the 4 straps to your engine using your header studs or exhaust bolt holes, then pull! It measures 28"W Sling x 27.5" Belt length. Use it once, then wonder how you ever got along without one... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Engine Transport Cradle - Triple-T
Take a look at the durable, light weight design on this brand new Engine Transport Cradle - Triple-T that's sure to earn it's keep the day you receive it! Specifically designed for speed and efficiency on race day during an engine swap, it does not require any hose clamps. Just remove 2 bellhousing nuts and your done! It's both sturdy and light to cut down on weight in your trailer. And can be ordered with optional heavy duty casters if needed. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Price: $200.00 - $275.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another BRAND NEW item... Without the brand new price!!!
Flatout 426 Hemi Head Gaskets - 4.375
Save GoNitrolink.com to your favorites for money saving deals like these brand new
Flatout 426 Hemi Head Gaskets - 4.375 for all you racers out there running fatheads! These are the copper style, for the 4.375 bore, that are available in .90, .95, .100 or .105 thickness and are ready to ship out right after you order them... It's easy, just click, then they ship!
Choose your thickness in the "options" menu below.
We carry a complete line of all Dan Olson Products!
Header Covers
"Nitrolink" offers several different styles of Header Covers to choose from, to help keep unwanted debris out of those pipes while your towing back to your pit area! This brand new set works exceptionally well with your Dan Olson or similar style headers and are made of durable, light weight aluminum so they clean up easily. And they're polished to a brilliant shine so they deliver that clean professional finished look your race team is known for! The standard size offered here is for the 2 1/2" size pipe diameter with a 40° angle. However, custom sizes are also available at a slightly higher rate. Order your set today on our website, then check one more thing off your list!
Sold as a set.
Hemi 392/Rodeck Main Bearing Engine Kits
Attention all racers out there running the popular 392 Hemi... Now you know exactly where to go to get your brand new, hard to find Hemi 392/Rodeck Main Bearing Engine Kits right before the busy race weekend! These are made by King Bearings and are the standard, non-coated style that includes: 1 upper and 1 lower thrust bearing. And 1 complete set of upper and lower main bearings. These kits are sold separately and can be used on 392 nitro, alcohol, or gas engines... Order all your racing consumables 24/7 right here! GoNitrolink.com
Hemi Cam Degree Tool
The critical job of dialing in your camshaft after engine assembly just became a whole lot easier with this hard to find high quality Hemi Cam Degree Tool that comes complete with a dial indicator and aluminum head stud spacers that are also included to get the job done with precision accuracy. Simply drop the plate over the head studs on your #1 cylinder then go to work! Top plate is anodized black to help prevent corrosion and this kit is ready to provide years of service if cared for properly. Specialty pit tools available 24/7 right here! GoNitrolink.com
