Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Boninfante Titanium Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Boninfante Titanium Clutch could work on your nitro burning front or rear engine Dragster, Funny Car, Altered, or ? It's slightly used and in great shape and is the 10.5" size, equipped with the lighter weight titanium pressure plate, flywheel and donut. It's set up to run 5 disks (not included) and is the 9 stand model with upgraded 5/8" studs, with all adjusters included made of titanium. And loaded with 15 levers, with the option to add 3 more.
Why buy new???
So, if you've had a chance to shop around for a new Glide Clutch. Then be prepared to spend right at $15,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for thousands less than the cost of new so don't delay, order today!
Priced to move at: Only $3295.00 OBO.
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
TAK Titanium Blower Restraint Plates
Hi-Performance Titanium Racing Components for way less than the price of new!!! And that's exactly what you'll find right here with this slightly used set of TAK Titanium Blower Restraint Plates that are being offered to include both the top and bottom plates. This upgraded set-back style is in nice shape, is super light weight and ready to save it's new owner a ton of money not having spend over $3,000 bucks for this exact set-up brand new.
Titanium top plate includes all front, back and side straps with mounting holes measuring
4 1/2" x 13 1/4" center to center. And it's equipped with the standard 4 1/2" x 11 1/2" opening. Titanium bottom plate mounting holes fit over your existing blower studs. And it's equipped with the standard 4 3/16" x 13 15/16" opening... And the great news is that this set-up comes with current fresh cert tags, so you know your money was well spent here! Titanium, carbon fiber & billet racing components taken to the next level! GoNitrolink.com
FIE Hemi Magneto & Coil
Recently tested and ready for showtime allows you to buy this slightly used FIE Hemi Magneto & Coil with confidence right here at Nitrolink!!! And if you're running a Nostalgia Top Fuel Dragster or Heritage Series Nostalgia Nitro Funny Car, then you're on track to save big time! This 10 amp points style magneto, with a CCW rotation was recently tested good to go and not been run since. It's equipped with the popular Dunn style cross-drive, slightly used rotor and brand new cap. The slightly used FIE large size Coil that's also included was recently tested as well and comes with a billet mounting bracket for a quick easy installation. For this exact set-up brand new, expect to pay right at $2300 bucks! But not here... Not today! Save more, race more, win more! Gonitrolink.com
Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Weld 16x16 Non-Beadlock Rear Wheels
Load up and head for the race track after saving big time on this nice used set of
Weld 16x16 Non-Beadlock Rear Wheels. And with a price like this... They're sure to help get you to the next race with several hundred bucks left over not having to buy new!!! This set is the "Pro Star" non-beadlock style, with a 5 on 5 bolt pattern and a 4 1/4" offset/backspace. The polished finish on both wheels has a nice brilliant shine with the centers and stud holes being in great shape, with no cracks or oblong. Both wheels are NHRA "tech friendly" with SFI 15.1 tags and have seen very little track time. And have never been bent up, welded on, or repaired. And as usual, you will find with this set not being brand new, your common minimal wear with slight nicks & scratches throughout... Just mount up a set of tires, then send it!!! Save more... Race more... Win more!!! GoNitolink.com
Sitko Standard 426 Hemi Mag Drive
A top of the line quality component, with an affordable price!!! Is exactly what you'll find right here with this brand new Sitko Standard 426 Hemi Mag Drive that's ready to be pressed into service right out of the box! This single style mag drive is made of billet aluminum, with the standard offset. And is belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and is ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear... Save more, race more, win more... GoNitrolink.com
426 Hemi Valve Covers
The 2022 racing season is off to a great start... So, let's get you to the staging lanes that much quicker by saving you some cash $$$'s right here!!! This set of 426 Hemi Valve Covers was made by Williams and is sure to deliver the quality and craftsmanship you've been looking for! This pair could work with your BAE, Alan Johnson, Dart, etc; Fuel Heads... However, they will not adapt to your application if you're running "Fatheads" such as BAE Stage 4's, 5's etc...
Both are in nice used condition and free of any damage or repairs. The polished finish has a nice brilliant shine, with your common slight nicks and scratches from normal use. They're loaded with a complete set of aluminum tin spark plug tubes. And a nice used set of polished SAE "quick release" 1 1/2" size Breathers to make the deal that much better!
Brand new price elsewhere will run you close to $1,300 bucks a set to duplicate. But not here... Not today! Quality Racing Components 24/7 right here! GoNitrolink.com
"Head on Engine" Valve Spring Tester/Remover - Fuel Heads
How much valuable time would you save in between rounds if you didn't have to remove your injector, supercharger, intake manifold and cylinder heads just to test or replace valve springs? Check out this brand new, state of the art "Head on Engine" Valve Spring Tester/Remover - Fuel Heads that was specifically designed to do just that! This 426 hemi valve spring maintenance tool can be ordered to work with either double or triple valve springs. And it comes with everything needed to test and or remove valve springs with all the components mentioned above still on the engine... How cool is that!!! On race day, this could be a real game changer right here! When ordering, please specify what rocker arms and stands you're running and we'll take it from there... Race, Win, Repeat! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another BRAND NEW item... Without the brand new price!!!
Venolia 426 Hemi Aluminum Rods
Saving your race team hard earned $$$'s is one more thing we do best here at Nitrolink... And if you're in need of a longer size rod for your set-up, then do we have a deal for you!!! Check out this brand new set of Venolia 426 Hemi Aluminum Rods that are ready to ship out immediately, with no wait time! This set of 9 total, is the Venolia "V-Series" style and gives you one spare to work with. All rods included have a 7.522" length and work with your 1.094" pin size and ready to be pressed into service shortly after you give us a call, or click the "buy it now" button! GoNitrolink.com
Enderle Buzzard Injector
Anodized black for that awesome stealth look!!! And that only makes it easier to imagine how cool this Enderle Buzzard Injector would look bolted up to your ride! This one's slightly used, in great shape with no damage or repairs. And ready to offer it's new owner that iconic look that will never go out of style. Freshly anodized and ready to install, this injector has mounting holes that measure the standard 15 1/4" x 4 3/8" center to center with the bottom opening measuring 15" x 4 7/16" total. And it comes loaded with throttle arms and throttle stops also included as well. The large 5" size butterflies are in great shape allowing the throttle shaft to operate nice and smooth with no binding. And if you need a super trick Billet Starting Line Air Bleed Valve to go with it (sold separately)... We can do that too! Quality Racing Components 24/7 right here... GoNitrolink.com
"Head on Engine" Valve Spring Tester/Remover - Fatheads
How much valuable time would you save in between rounds if you didn't have to remove your injector, supercharger, intake manifold and cylinder heads just to test or replace valve springs? Check out this brand new, state of the art "Head on Engine" Valve Spring Tester/Remover - Fatheads that was specifically designed to do just that! This 426 hemi valve spring maintenance tool can be ordered to work with either double or triple valve springs. And it comes with everything needed to test and or remove valve springs with all the components mentioned above still on the engine... How cool is that!!! On race day, this could be a real game changer right here! When ordering, please specify what rocker arms and stands you're running and we'll take it from there... Race, Win, Repeat! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
