Pro Analog Tire Gauge - 3 1/2" Size
And if you're looking for an even larger gauge size, then check out this brand new top quality Pro Analog Tire Gauge - 3 1/2" Size that's sure to check all the boxes! It's offered in several PSI range options, to include 0-15 psi, 0-30 psi, 0-40 psi, or 0-60 psi for a more specific, super accurate reading! The 0-15 and 0-30 read in 1/4 lb. increments. And the 0-40 and 0-60 read in 1/2 lb. increments. It's equipped with a larger 3 1/2" glow in the dark face for easy readability. And has an accuracy rating between 1/4 lb./2% to 2% depending on the gauge you choose. And this style holds your pressure reading until released. It features a protective gauge bumper, dual bleed air pressure release buttons, internal gauge damper for a more accurate reading and longer life and a hard case to keep it safely stored during transport. A handy 17" hi-flex hose with swivel angle chuck, plus an extra ball style chuck is also included to make sure we covered all the bases... Save, Race, Win, Repeat! GoNitrolink.com
Available in 0-15, 0-30, 0-40, or 0-60 PSI...
Choose PSI range in the "options" menu below.
Analog Tire Gauge - 0-15 PSI
This brand new top quality Analog Tire Gauge - 0-15 PSI is exactly what you'll be looking for to help set up those rear slicks with precision accuracy! This one's the 0-15 psi model that offers a smaller range reading in 1/4 lb. increments. It's equipped with a larger 2 1/2" glow in the dark face for easy readability. It has a 1/4 lb./2% accuracy and holds your pressure reading until released. It features a protective gauge bumper, high flow pressure release button, internal gauge damper for a more accurate reading and longer life. And a handy 17" hi-flex hose with swivel angle chuck, plus an extra ball style chuck is included to make sure we covered all the bases... Save, Race, Win, Repeat! GoNitrolink.com
Also available in 0-30, 0-40, 0-60, or 0-100 PSI...
Sitko Standard 426 Hemi Mag Drive
A top of the line quality component, with an affordable price!!! Is exactly what you'll find right here with this brand new Sitko Standard 426 Hemi Mag Drive that's ready to be pressed into service right out of the box! This single style mag drive is made of billet aluminum, with the standard offset. And is belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and is ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear... Save more, race more, win more... GoNitrolink.com
"Nitrolink" offers a complete line of all Weld & Sander products!
Weld & Sanders 16x16 Liner Wheels
Are you having an issue with your older set of rear wheels not passing tech? Then get ready to save some cash, because one call does it all right here!!! Check out a brand new set of either Weld & Sanders 16x16 Liner Wheels that can be ordered in either polished, or black anodized for just the right appearance you've been looking for! These are the non-beadlock style, that are NHRA "tech friendly" with new SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And available in multiple offset/backspace sizes to meet your needs. If you have any further questions, just give us a call as we're here to help anytime! Racers helping Racers do what they do best... For Less! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Mahle Piston Ring products to fit your needs!
Mahle Piston Oil Ring Kits
Outfit your race team with top of the line Mahle Piston Oil Ring Kits for optimum performance and durability! Trusted by many of the pro nitro teams on tour, these rings are offered as a first, second and oil style ring and available in a wide variety of sizes to fit your application. So give us a call today with your requirements, then check piston rings off your list... Hi-performance consumables taken to the next level!!! GoNitrolink.com
Call: (916) 425-1427 anytime to order!
Sitko 426 Hemi Mag Drive
If you're looking to simplify your ignition system, without have to run all the advanced and sometimes complicated timing control components then this brand new Sitko 426 Hemi Mag Drive just might be the answer. This top of the line quality component is the single mag, offset, air actuated style that allows you to retard your timing during the run either manually, or with the help of a simple timer system. It's made of billet aluminum, belt driven and equipped with a bronze gear and standard 5/16" stem. It comes complete with an idler bracket support and ready to accept your MSD or Mallory Magnetos that are equipped with the Dunn style gear. Hard to find racing components right here 24/7... GoNitrolink.com
Chassis Stabilizer - Round
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Round style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the popular 18" diameter round style, manufactured from durable rubber. Its sleek design and 1.75" deflated height allows it to slide under the lowest ground clearance vehicles and it can inflate to an adjustable maximum height of 10". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Rectangular 4" lift style also available.
Chassis Stabilizer - Rectangular
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Rectangular style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the smaller 23 1/4" x 7" rectangular style, manufactured from durable rubber. This style works best on applications where the chassis is 1.125" to 3" from the trailer floor. Its sleek design and 1.125" deflated height allows it to slide under the lowest ground clearance vehicles and it inflates to an adjustable maximum height of 4". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Round 10" lift style also available.
We offer a complete line of all Mahle Piston Ring products to fit your needs!
Mahle Piston Rings
Outfit your race team with top of the line Mahle Piston Rings for optimum performance and durability! Trusted by many of the pro nitro teams on tour, these rings are offered as a first, second and oil style ring and available in a wide variety of sizes to fit your application. So give us a call today with your requirements, then check piston rings off your list...
Hi-performance consumables taken to the next level!!! GoNitrolink.com
Call: (916) 425-1427 anytime to order!
Price
$11.09 – $92.25Price range: $11.09 through $92.25
Total
$11.09 – $92.25Price range: $11.09 through $92.25
Outfit your whole car with XRP Hose & Fittings here at GoNitrolink.com & SAVE!!!
XRP Straight Crimp Style Hose Ends
The majority of the pro nitro & alcohol teams on tour choose XRP products just like these for 2 main reasons... Unmatched quality and performance! And these XRP Straight Crimp Style Hose Ends are ready to deliver both! They're offered in either black for that awesome stealth look, or the popular nickel silver color. And can be ordered in sizes 4,6,8,10,12,16, or 20. PLEASE NOTE: This style fitting is designed to work specifically with the kevlar hose and crimp style collars only. They can be used as an oil line, or fuel line fitting as they're compatible with nitro, alcohol, or gas. And offer a quick, smooth installation or removal in between rounds. They can be ordered separately, or group up your whole order and save even more!
Call: (916) 425-1427 for larger order discounts.
Choose size & color in the "options" menu below.
Price
$27.08 – $95.48Price range: $27.08 through $95.48
Total
$27.08 – $95.48Price range: $27.08 through $95.48
Outfit your whole car with XRP Hose & Fittings here at GoNitrolink.com & SAVE!!!
XRP 90° Crimp Style Hose Ends
The majority of the pro nitro & alcohol teams on tour choose XRP products just like these for 2 main reasons... Unmatched quality and performance! And these XRP 90° Crimp Style Hose Ends are ready to deliver both! They're offered in either black for that awesome stealth look, or the popular nickel silver color. And can be ordered in sizes 4,6,8,10,12,16, or 20. PLEASE NOTE: This style fitting is designed to work specifically with the kevlar hose and crimp style collars only. They can be used as an oil line, or fuel line fitting as they're compatible with nitro, alcohol, or gas. And offer a quick, smooth installation or removal in between rounds. They can be ordered separately, or group up your whole order and save even more!
Call: (916) 425-1427 for larger order discounts.
Choose size & color in the "options" menu below.
Price
$27.08 – $95.48Price range: $27.08 through $95.48
Total
$27.08 – $95.48Price range: $27.08 through $95.48
Outfit your whole car with XRP Hose & Fittings here at GoNitrolink.com & SAVE!!!
XRP 45° Crimp Style Hose Ends
The majority of the pro nitro & alcohol teams on tour choose XRP products just like these for 2 main reasons... Unmatched quality and performance! And these XRP 45° Crimp Style Hose Ends are ready to deliver both! They're offered in either black for that awesome stealth look, or the popular nickel silver color. And can be ordered in sizes 4,6,8,10,12,16, or 20. PLEASE NOTE: This style fitting is designed to work specifically with the kevlar hose and crimp style collars only. They can be used as an oil line, or fuel line fitting as they're compatible with nitro, alcohol, or gas. And offer a quick, smooth installation or removal in between rounds. They can be ordered separately, or group up your whole order and save even more!
Call: (916) 425-1427 for larger order discounts.
Choose size & color in the "options" menu below.
