Used Carbon Fiber Bucket
Attention in the Pits!!! Funny Cars & Altereds to the lanes please... And if you're running a BAE Block, with a Dry Sump Oil Pump then get ready to save BIG TIME! Check out this slightly Used Carbon Fiber Bucket that could offer a quicker, cleaner option than the standard fabric style diaper when it comes to removal & installation in between rounds. This one's light weight and works with your BAE 426 Hemi aluminum block. It's in great shape, super clean and was recently certed, and also outfitted with a brand new inside liner to make this deal that much better! And it also comes complete with a set of 4 upgraded kevlar chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags, so you know your money was well spent here. And a set of 2 side absorbent pads are also included as well. Brand new, we sell these for right at $1500 bucks, so don't delay... Because just like on the race track, reaction time matters!
Racers helping Racers do what they do best... For Less! GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Moroso Dry Sump F/C Oil Tank
If you're getting ready to start on that project in your race shop, or just looking to replace your current tank on your funny car or altered then this next item takes care of both! This nostalgia style Used Moroso Dry Sump F/C Oil Tank is sure to go easy on your check book! It's made of aluminium, anodized black and in good used shape with your common nicks, scratches, etc; from normal use. Tank measurements are: 12" tall in front, by 15" tall in the back, by 16 1/4" tall at its highest point by the cap and is 3 1/2" wide. It's free of any damage or repairs, has a 3 gallon capacity and equipped with inside baffles. Inlets on top and the drain plug bung on the bottom are ready to accept your -12 size fittings and drain plug, (not included) and the suction outlet on the back is the -16 size. Also included is a billet filler cap to wrap up this money saving deal!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used MSD Battery Packs & Charger Kit
Lets save you some money right here with this Used MSD Battery Packs & Charger Kit that helps power up your ignition management such as six shooters, power grid, etc. Each battery delivers 14.4 volts and all three items are in great shape and equipped with Deutsch connectors for a secure fit. This package comes complete with (1) MSD smart charger and (2) battery packs, one for the car and one for a spare. This kit will be sold with a fresh set of batteries, so rest assured your money will be well spent here!
Price
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Total
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Used MSD Pro Mag 44 Kit
How about another "Super Saver Deal" right here for all you racers out there on a tight budget looking to save over $3,200 bucks not having to buy new!!!
Check out this slightly Used MSD Pro Mag 44 Kit that's ready to get the job done... And for way less! This one features the popular PN 8130 small cap style Magneto that's currently set up with the clock wise (CW) rotation. However, it can be changed to the hemi rotation easily if you choose. It's equipped with the RCD style drive set-up on the bottom. And also comes complete with a slightly used MSD Pro Mag 44 Points Box (PN 8145) and MSD Pro Mag 44 Red Coil (PN 8142). All items were recently tested and good to go, so you know your money was well spent here. All components are in nice shape, free of any damage or repairs with your common slight cosmetic scratches from normal minimal use. This complete kit is in stock, ready to ship today and definitely ready for showtime!
For this exact set up brand new, expect to pay right at $7,200 bucks! And that's not including the wire set. So, if you're looking to upgrade your existing ignition system, need a spare for race day, or about to start on that new project in the race shop... Then this money saving deal's definitely for you! Helping racers do what they do best... For less! GoNitrolink.com
Price
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Total
$3,995.00 Original price was: $3,995.00.$3,495.00Current price is: $3,495.00.
Used MSD Pro Mag 44 Package
How about another "Super Saver Deal" right here for all you racers out there on a tight budget looking to save over $3,700 bucks not having to buy new!!! And if you're running a Hemi, then you'll want to check out this slightly Used MSD Pro Mag 44 Package that's ready to go to work... And for way less! This one features the popular PN 8140 large cap style Magneto that's currently set up with the hemi counter clock wise (CCW) rotation. However, it can be changed to the chevy rotation easily if you choose. It's equipped with the Dunn style, clover leaf drive set-up on the bottom. And also comes complete with a slightly used MSD Pro Mag 44 Points Box (PN 8145) and MSD Pro Mag 44 Red Coil (PN 8142) and RCD Base Clamp to complete the package. All items will be tested before shipping, so you know your money was well spent here. All components are in nice shape, free of any damage or repairs with your common slight cosmetic scratches from normal minimal use. This set-up comes with everything you see in the photos. And is in stock and ready to ship out today!!!
For this exact set up brand new, expect to pay right at $7,200 bucks! So, if you're looking to upgrade your existing ignition system, need a spare for race day, or about to start on that new project in the race shop... Then this money saving deal's definitely for you!
All the best... For less, right here! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 51T - Quick Change Pulley
How about a slightly Used RCD 11mm - 51T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 51T - Quick Change Pulley
How about a slightly Used RCD 11mm - 51T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 57T - Mag - Quick Change Pulley
How about a slightly Used RCD 11mm - 57T - Mag - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm 36T Mag Blower Pulley
How about a nice Used RCD 11mm 36T Mag Blower Pulley that's ready for showtime! This one's the GT style made of light weight magnesium and designed to work with the popular 75, or 84 mm wide blower belts. Pulley measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm 51T Quick Change Pulley
Check out this Used RCD 11mm 51T Quick Change Pulley that's in nice shape and ready for showtime! This one's the center flange style, that works with your quick change crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
