BAE 426 Hemi Fuel Heads
Check out this "complete" set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They're the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16" stem). And Manley inconel 1.925 exhaust valves (3/8" stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we'll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $3895.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Billet Air Bleed
Attention all Crew Chiefs!!! Just prior to pulling your driver up into the starting beams, wouldn't it be great if you could do away with that whole push-lock tuning plug program you've been having to deal with? Well, this next item may be just what you're looking for! This custom Billet Air Bleed was designed specifically to adjust idle speed on blown nitro or alcohol engines where a specific RPM is critical for staging, starting line launch and clutch management. This high quality component is machined from billet aluminum, is durable, light weight and allows for precise adjustability in very small increments until fully closed. It mounts to your injector hat and has a serrated edge to assure fumble free adjustments when it's time to put down a number! Order today... And it's on the way!
Price
$41.95 – $43.95Price range: $41.95 through $43.95
Total
$41.95 – $43.95Price range: $41.95 through $43.95
We offer a complete line of all Automan products!
Billet Burnout Stops
It's sleek, it's profiled, it's just plain awesome! These super trick Billet Burnout Stops are a team owners best friend when it comes to keeping engine RPM at a safe level during the burnout. Installs instantly on your throttle cable by the injector throttle stop. After the back up, simply pull the ring attached to the stainless safety pin clip to remove it, then bring your driver up to the beams! They're made of billet aluminum, polished and anodized for a bright brilliant shine, to stand out so you don't forget to take them off. And they're available in 2 throttle cable sizes, 10/32" or 1/4" inch. Length may need to be adjusted if needed. Instruction sheet included... Top quality products = a top quality race team! GoNitrolink.com
Billet Burst Panel Deflector
Supercharger back-fire is something we all try to avoid at almost any cost... However in the event of one, why not attempt to prevent as much damage as possible, right! And that leads us to this Billet Burst Panel Deflector that installs easily and could possibly help prevent costly body or hood damage! It's durable, light weight and machined from billet aluminum and works with the standard size, 24 bolt burst panel frame. And can be installed to deflect debris or manifold pressure up or down depending on what type of race car you're running. Pair one of these up with a Nomex Plug Wire Saver for a little more added protection... Then drop the hammer!
We offer a complete line of all Lenco products!
Billet Drive Shaft Cover
When unmatched quality and craftsmanship is what you're looking for, then check out this brand new Billet Drive Shaft Cover that's ready to offer that and a whole lot more! This one's made by Lenco and set up to work with either the CS-1, or CS-2 style transmission. It's anodized black for that awesome look with the complete unit measuring 8" long including the flange. The tube cover itself measures 6" long and has a 3" inside diameter. It can be installed or removed quick and easy in your front engine dragster, funny car, altered, etc; in between rounds on race day. And includes the transmission flange, driveshaft cover, stainless clamp with safety pin and transmission housing rear seal... And don't forget about the unmatched customer service! GoNitrolink.com
Please choose your Output Shaft size (32 Spline or 35 Spline) in the "Options" menu below.
Billet Remote Starter Button
Supplying your race team with all the right equipment to make sure you're prepared on race day is what we do best! So, check out this brand new Billet Remote Starter Button that allows you to crank over your motor from the engine compartment to help streamline the process when it comes to checking compression, doing a leak-down, setting valves, or turning over your engine to get oil pressure. It's quickly connected to your starter motor or solenoid prior to use, then easily removed when your done... Specialty Pit Tools taken to the next level! GoNitrolink.com
WARNING: Fully disconnect any coil wire(s) prior to use to help avoid accidental start up's in gear!!!
Blower Base Gaskets
Let GoNitrolink.com save you both time and money on all your consumables as well... And we'll keep offering products like these Blower Base Gaskets to help keep your race team budget in check! These are the upgraded nitrile style for better performance and longevity. And the standard size that could work with most any 6-71 to 14-71 roots style supercharger. They feature a .032" thickness, with a 4" x 12 1/4" center opening without the center tab. And they work with your standard 7/16" size blower studs. This is one of those items that definitely needs to be put in the race trailer before the race weekend... Remember, don't forget your spares!
Sold separately.
Price
$50.00 – $75.00Price range: $50.00 through $75.00
Total
$50.00 – $75.00Price range: $50.00 through $75.00
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Blower Opening Cover - Triple-T
How about a brand new Blower Opening Cover - Triple-T that's made of light weight aluminum and designed to keep out dust and debris while your supercharger sits quietly in your race trailer waiting to go to work! We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Choose either black anodized, or natural finish in the options menu below.
Blower Starter Switches
Paying close attention to all the details is key to a successful race weekend! And now, you know exactly where to go to order your spare Blower Starter Switches just like this one! These high quality momentary toggle switches are quick and easy to replace. And one of those small items that would be almost impossible to replace at the race track, if needed. They're sold separately and at this price, you can keep a couple in the race trailer to assure that you're fully prepared... Save, Race, Win, Repeat! GoNitrolink.com
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Blower Work Stand - Triple-T
Streamline your racing operation with this brand new Blower Work Stand - Triple-T designed to allow you to service your supercharger from the top or bottom with ease and efficiency! It rotates 360° easily and has an open bottom providing easy access for servicing and cooling. It's made to last from heavy duty steel with a black powder coated finish. And equipped with 4 mounting holes for easy installation on your workbench or pit table. Another #1 choice of the pro teams right here. Order yours today!
Price: $595.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Bottom End "Diver" Pads
Your Bottom End Crew Member is sure to think it's their birthday after you "gift" them with one of these Bottom End "Diver" Pads.They're comfortable and made of the highest quality marine grade vinyl, making them a breeze to clean up. They measure 52" x 26" and fold up quick and easy for storage practically anywhere in your race trailer or race shop. Quality racing components 24/7 right here! GoNitrolink.com
Sold Separately.
Brodix -12 SBC Aluminum Heads & Shaft Rockers
All Small Block Chevy racers to the lanes please!!! But first, check out this slightly used set of Brodix -12 SBC Aluminum Heads & Shaft Rockers that come with a budget friendly price tag to help ease expenses on race day! This set of 15° aluminum cylinder heads is in nice shape and free of any damage or repairs. And if you choose, you can run water through them. They come assembled with a slightly used set of Manley stainless 2.140" intake valves & 1.600" exhaust valves, Manley triple springs and a set of titanium retainers. Jesel Shaft Rockers included are the 1.65 ratio for both intake and exhaust, with a set of 3/8" size adjusters and ARP 12 pt. adjuster nuts also included as well. All shaft rockers and hardware are slightly used, in very nice shape and also free of any damage or repairs.
Why buy new??? For this exact set-up assembled new, you're looking at $5,000 bucks plus. But not here... Not today! Pick up this set right here for almost half price! And have an extra $2300 bucks left over to spend elsewhere! Race more, spend less, repeat! GoNitrolink.com
Priced to move at: Only $2695.00
