Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
Price
$1,995.00 $1,495.00
Total
$1,995.00 $1,495.00
Intake Manifold Flatness Checker
Here's one more specialty pit tool that's sure to earn it's keep the first time it lets you know there's a problem before the next round! Check out this brand new
Intake Manifold Flatness Checker that offers precision accuracy to determine if your blower manifold is perfectly flat, or if it needs to be lapped for an optimum blower to manifold seal. Don't risk loosing critical boost pressure by running a warped manifold just because you don't have the proper tool to diagnose the problem. Here's one more way to help prevent declining performance, or possible costly parts failure on the race track. This valuable tool is ready for action right out the protective wooden case that's also included. That helps provide secure storage in your trailer, at your race shop, or on the road. And it works with most any size blower manifold on the market... Making sure you're better prepared for the next event is what we do best! GoNitrolink.com
Price
$1,029.99 – $1,177.98
Total
$1,029.99 – $1,177.98
Pneumatic Valve Spring Compressor Tool
Having the right tools for the job has always been key not only at the race shop preparing for your next upcoming event, but also at the racetrack to keep your team efficient and going rounds! If your looking to cut down the time spent changing your valves or springs then this brand new Pneumatic Valve Spring Compressor Tool is exactly what you're looking for! This high quality specialty tool is durable, light weight and made of 6061 / 7075 T-6 aluminum. And is sure to offer the same quality service to your race team as it does with many of the pro nitro teams on tour! It's two stage air pump delivers up to 1,000 lbs. of force on as little as 70 psi. (DO NOT exceed 120 psi) and comes equipped with a 1.6" ID jaw adapter, however can also be ordered with a larger 1.740" ID jaw adapter (sold separately) if needed. The non-marring screw cap helps to protect against damage to your high end valves. And a 1-1/2" screw adjustment allows for a 7" to 8-1/2" throat. Add one of these to your race team today and be that much ahead of the competition tomorrow!
Choose the standard 1.6" ID jaw, or upgraded 1.740" ID size in the "options" menu below.
"Head on Engine" Valve Spring Tester/Remover - Fuel Heads
How much valuable time would you save in between rounds if you didn't have to remove your injector, supercharger, intake manifold and cylinder heads just to test or replace valve springs? Check out this brand new, state of the art "Head on Engine" Valve Spring Tester/Remover - Fuel Heads that was specifically designed to do just that! This 426 hemi valve spring maintenance tool can be ordered to work with either double or triple valve springs. And it comes with everything needed to test and or remove valve springs with all the components mentioned above still on the engine... How cool is that!!! On race day, this could be a real game changer right here! When ordering, please specify what rocker arms and stands you're running and we'll take it from there... Race, Win, Repeat! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Head on Engine" Valve Spring Tester/Remover - Fatheads
How much valuable time would you save in between rounds if you didn't have to remove your injector, supercharger, intake manifold and cylinder heads just to test or replace valve springs? Check out this brand new, state of the art "Head on Engine" Valve Spring Tester/Remover - Fatheads that was specifically designed to do just that! This 426 hemi valve spring maintenance tool can be ordered to work with either double or triple valve springs. And it comes with everything needed to test and or remove valve springs with all the components mentioned above still on the engine... How cool is that!!! On race day, this could be a real game changer right here! When ordering, please specify what rocker arms and stands you're running and we'll take it from there... Race, Win, Repeat! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Blower Work Stand - Triple-T
Streamline your racing operation with this brand new Blower Work Stand - Triple-T designed to allow you to service your supercharger from the top or bottom with ease and efficiency! It rotates 360° easily and has an open bottom providing easy access for servicing and cooling. It's made to last from heavy duty steel with a black powder coated finish. And equipped with 4 mounting holes for easy installation on your workbench or pit table. Another #1 choice of the pro teams right here. Order yours today!
Bench Top Valve Spring Tester
Both quality and craftsmanship are offered right here with this fast, easy-to-use precision Bench Top Valve Spring Tester. Just bring the spring to installed height, lock down the precision stop and run through a box of springs quickly, easily and with precision accuracy. Made of anodized billet aluminum, it's durable enough for everyday use at the shop, or perfect to have in your trailer at the races. And it's available with either a 600 lb. or 1000 lb. gauge. Now you know exactly where to go for all your specialty pit tool needs! GoNitrolink.com
Choose either 600 lb. or 1000 lb. gauge in the "options" menu below.
Air Powered Valve Lapping Tools
The ultimate in Air Powered Valve Lapping Tools can be found right here with one of these brand new quality built time savers that can't wait to go to work for your race team!
This style operates on 90 PSI and is sure to streamline your operation in the cylinder head assembly department. It comes complete with 3 different cup sizes (7/8", 1-1/8" and 1-1/4") and 3 valve stem adapters. Replacement Cups are also available and sold separately. The road to the winners circle may be shorter than you think! GoNitrolink.com
Valve Spring Compressor Tool
Made of billet aluminum and definitely one of the nicest on the market! This durable light weight Valve Spring Compressor Tool is designed to work with most all the popular size valve springs and has a dual adjustment capability for perfect positioning and easy access to valves and springs. It easily compresses springs to 1000 lbs. And the handle can be easily removed for use with your battery powered impact driver and socket to make the job that much quicker and easier. Now you know exactly where to go for all your specialty pit tool needs! GoNitrolink.com
Cylinder Head in the photo is for display only.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Cylinder Head Work Stand - Triple-T
Servicing your cylinder heads has never been easier with the help of this brand new Cylinder Head Work Stand - Triple-T that can service intake or exhaust without ever removing the head from the stand. And it rotates 360° with 5 different pitch positions. It's made to last from heavy duty steel with a nickle plate finish. And equipped with 4 mounting holes for easy installation on your workbench or pit table. This one's the choice of champions and ready to join your team today!
Complete Fuel Hydrometer Kit
Over the years, we have found premium alternatives to every component and had them assembled all together right here to offer this brand new Complete Fuel Hydrometer Kit for all our valued customers! Other brands just don't deliver when it comes to durability, accuracy and clear readability. So, this kit includes a large diameter beaker that's perfect for pouring fuel in an out of and is less prone to tipping over. The durable stainless steel dial thermometer included is equipped with a fuel-proof bezel and replaces the fragile "old school" mercury glass thermometer. The Hydrometers are finely graduated and deliver a clear, accurate nitromethane reading from 0% to 100% if you choose, (with the 4 hydrometer kit). If the full range is not required, then no problem... Just choose the smaller size kit with the range you need and you're all set! All kits include a large fuel-proof polyethylene padded custom die-cut foam case, along with a nitro chart and instructions. Here at "Nitrolink" we sell you just what you need and not what you don't!
Choose the number of Hydrometers needed & range(s) in the "options" menus below.
(0%, Gas & Methanol) (2% - 35%, Nitro) (32% - 60%, Nitro) (60% - 100%, Nitro)
Snap-On Timing Light
Precision accuracy with a whole lot of extras is what this almost new Snap-On Timing Light is ready to offer! This one's the Ultra-Lite multi-purpose EETL500 model and was designed to work with race cars, hot rods, or older muscle cars with distributors and has some late model applications as well. It's comfortable design is capable of measuring engine RPM, checking battery voltage and measuring secondary firing voltages and burn times. It features a diamond plate underside and large back-light LCD screen, with a handy dual LED flashlight built in. And a protective hard case is also included for secure transport. Specialty Pit Tools 24/7 right here at: GoNitrolink.com
• Measures engine RPM and ignition advance, as well as dwell on older points-type ignition systems.
• Clearly view each flash with patented skip circuitry for tachometer readings up to 9,900 RPM, adjust engine RPM.
• Timing on both 2- and 4-cycle (DIS and conventional) engines, 1-12 cylinders, with no adapters required.
• View, set and adjust ignition advance and retard: 0-90° set base timing, overall advance and view ignition retard.
• Measures battery voltage (10-16 V) provides a quick visual indication of the current state of the battery.
• Measure and adjust ignition dwell: 0-180°/1-12 cylinders with points ignitions.
• Set ignition timing on DIS, conventional and most aftermarket ignition systems without solid core wires. (Fits up to 10mm diameter)
• Diagnoses the following: Isolates faulty ignition wires, plugs, modules and coils.
• Measuring and displays kV readings: View individual cylinder firing voltage, perform snap throttle and coil stress tests.
• Tests secondary ignition system: Allows measurement of burn voltage and burn time.
