Pro Analog Tire Gauge - 3 1/2" Size
And if you're looking for an even larger gauge size, then check out this brand new top quality Pro Analog Tire Gauge - 3 1/2" Size that's sure to check all the boxes! It's offered in several PSI range options, to include 0-15 psi, 0-30 psi, 0-40 psi, or 0-60 psi for a more specific, super accurate reading! The 0-15 and 0-30 read in 1/4 lb. increments. And the 0-40 and 0-60 read in 1/2 lb. increments. It's equipped with a larger 3 1/2" glow in the dark face for easy readability. And has an accuracy rating between 1/4 lb./2% to 2% depending on the gauge you choose. And this style holds your pressure reading until released. It features a protective gauge bumper, dual bleed air pressure release buttons, internal gauge damper for a more accurate reading and longer life and a hard case to keep it safely stored during transport. A handy 17" hi-flex hose with swivel angle chuck, plus an extra ball style chuck is also included to make sure we covered all the bases... Save, Race, Win, Repeat! GoNitrolink.com
Available in 0-15, 0-30, 0-40, or 0-60 PSI...
Choose PSI range in the "options" menu below.
Price
$99.95 – $119.95Price range: $99.95 through $119.95
Total
$99.95 – $119.95Price range: $99.95 through $119.95
Clutch Pack Line-Up Tool
Lightweight aluminum and ready to be pressed into service, this Clutch Pack Line-Up Tool is machined to the highest quality and anodized black for quick easy clean up. And designed to fit like a glove when it comes to lining up all your clutch disks to accept your input shaft or transmission. They can be ordered in 3 sizes, 1 3/8", 1 3/4", or 1 7/8" 10 spline, to work with either the large or small size pilot bearing. One more quality race tool to match your quality race team!
Hemi Sleeve Alignment Tool
How about another super handy pit tool that's sure to make your life a whole lot easier at the race shop, or on race day! Check out this brand new Hemi Sleeve Alignment Tool that's ready for action right out of the box! This one's made of billet aluminum and it's universal design allows it to work with your 4.187" to 4.700" sleeve sizes. It's anodized black and equipped with a long size handle for a precise, proper installation. It works with both the 392 or 426 hemi's and definitely the best choice to help avoid any costly damage to your sleeves during installation... Racers helping Racers do what they do best! GoNitrolink.com
Intake Manifold Cover
This brand new Intake Manifold Cover is the perfect item to keep out dust and debris while your servicing your supercharger. It's made of 1/16" aluminum, anodized black and measures 12 1/2" wide by 13 3/4" long. And also serves as a cover to keep your competition "in the dark" from seeing any manifold design secrets. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Camshaft Checker Tool
So, how about we streamline your race team a little more with a slightly used Camshaft Checker Tool that's ready to be pressed into service right out of the box! This one works with your 426 Hemi equipped with a .904 lifter bore size only. It's made of light weight aluminum and comes with an easy to read gauge that helps you degree your camshaft by displaying your cam lift. Plus, it's compact size makes it easy to store away nicely in your race trailer or race shop when not in use... Specialty Pit Tools 24/7 right here! GoNitrolink.com
T-Handle Spark Plug Wrench
The perfect item to get the job done quickly in between rounds... This brand new T-Handle Spark Plug Wrench is anodized black and works with your standard 5/8" or 13/16" size plugs. It measures 15 3/4" long with a 9 3/4" handle at the top and is the standard, non-torque model, for all our valued customers on a budget. Quality built and ready for race day, this plug wrench should be in the tool box of every hemi race car owner on the planet! Save more, race more, win more! GoNitrolink.com
Choose either 5/8" or 13/16" plug size in the "options" menu below.
Piston Ring Filer Tool
If you've been looking for a specialty tool that can perform two jobs equally as well then check out this brand new Piston Ring Filer Tool that can not only deliver a clean, precise end gap on your piston rings. But also help you with your valve stem clearance as well. It's equipped with a 120 grit silicone carbide wheel that holds its shape. And 2 small bumper stops to help secure your piston ring for nice accurate cut. It has provisions to mount to your work bench if you choose. Or small enough to store away nicely in your race trailer. Order one today... And the problem goes away!
Price
$168.95 Original price was: $168.95.$118.95Current price is: $118.95.
Total
$168.95 Original price was: $168.95.$118.95Current price is: $118.95.
Double End Pro Series AN Wrench Set
The exact same quality, strength and durabilty is offered here with less wrenches to carry! This anodized Double End Pro Series AN Wrench Set is made by XRP and works with the swivel nuts on hose ends. Each of the (4) wrenches are color coded so you know exactly what wrench to reach for to get the job done quickly. And the fully radiused edges offers a comfortable grip second to none. This set is made from heat treated 6061 aluminum alloy for lasting performance. And includes sizes: (-3, -4) ( -6, -8) (-10, -12) (-16 & -20). Now you know exactly where to go for all your specialty pit tool needs! GoNitrolink.com
Main Cap Puller
Definitely one of the nicest heavy duty Slide Hammers on the market today! This Main Cap Puller is anodized black and ready for showtime!!! Your bottom end guy is sure to appreciate being able to drop those Main Caps with this super efficient, high quality tool... This one was specifically designed to deliver a far better result compared to some of the other lighter duty styles on the market. Use this style once, and wonder how you ever got along without it! It's available in 5/16", 3/8", or 7/16" thread size. And works with your TFX, BAE, or Keith Black standard or 3" Main Caps. Order here, save money, race more often! GoNitrolink.com
Choose either 5/16", 3/8", or 7/16" thread size in the options menu below.
Out of Hole Piston Checker Tool
This handy Out of Hole Piston Checker Tool is compact, light weight and will store away nicely in your race trailer or tool box until you're ready to put it to work! It allows you to get an accurate read on how high your Piston comes up for Piston/Valve clearance. And it comes complete with a dial indicator. Now you know exactly where to go for all your specialty pit tool needs! GoNitrolink.com
Leak Down Testers
Quality, durability and accuracy! That's the best way to describe one of these brand new Leak Down Testers ready to assist you in checking for bent or leaking valves, bad ring seal, or even leaking head gaskets. Both gauges feature rubber bumpers for extra added protection. And this model is outfitted with a control inlet valve to avoid shock to the gauges when air is turned on and helps provide a more accurate reading, easier use and longer gauge life. It comes complete with either a 12mm, or 14mm spark plug connector and hose. Don't forget to save GoNitrolink.com to your favorites for all your high end racing component needs!
Choose either 12mm, or 14mm spark plug size in the "options" menu below.
Main Bearing Holder
Providing your bottom end technician with the right tools to get the job done efficiently is exactly what this brand new Main Bearing Holder does best! This professionally made, high quality rack was designed specifically to make inspection in between rounds quick and easy! It holds all your main bearings securely and is clearly marked so you know exactly what bearing went where. It's made of durable aluminum, cleans up easily after use and it's compact size (8"W x 8.5"L x 1"H) stores away nicely in your race trailer or at your race shop when not in use... Save, Race, Win, Repeat! GoNitrolink.com
