Pedal Clutch Dial Indicator
If you're running a pedal clutch then this brand new Pedal Clutch Dial Indicator is going to make your clutch technicians job a whole lot easier on race day! Having a dependable high quality precision tool like this one is highly recommended to ensure a proper accurate adjustment in between rounds in order to establish a consistent clutch program. One more small detail that could make a big difference at the end of the day going into the final round!
Price: $159.95
Please note: Specify your brand of clutch when ordering. Please call: (916) 425-1427 to order.
Digital Torque Wrench Tester
At the race track or back at the race shop, it's critical to be able to reach for a torque wrench that reads accurately every time you use it! Consistency wins races and this brand new Digital Torque Wrench Tester is the exact item needed to keep tabs on how consistent your torque wrench calibration is reading and when it's time to send out for service. This handy tool accommodates your 1/2" drive torque wrenches and has a push button conversion foot pounds to inches mode and a peak hold feature that saves your maximum reading. It's equipped with a back lit read out screen for night use and powers up using one standard 9-volt battery. Now you know where to go for all your specialty pit tools... Nitrolink!
Price: $695.00
Please call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Crank Gear Puller Tools - Triple-T
Use one of these handy Crank Gear Puller Tools - Triple-T once and wonder how you ever got along without it! Designed to remove your crank gear safely and efficiently this brand new high quality tool is made to last. It's steel construction is ready to make short work of this task every time you reach for it! We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Price: $295.00 each.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Air Powered Valve Lapping Tools
The ultimate in Air Powered Valve Lapping Tools can be found right here with one of these brand new quality built time savers that can't wait to go to work for your race team!
This style operates on 90 PSI and is sure to streamline your operation in the cylinder head assembly department. It comes complete with 3 different cup sizes (7/8", 1-1/8" and 1-1/4") and 3 valve stem adapters. Replacement Cups are also available and sold separately. The road to the winners circle may be shorter than you think! GoNitrolink.com
Powered Valve Lapping Tool
More great news! Yes, they do make a quality built Powered Valve Lapping Tool that changes the rotary action of your power drill into an effective oscillating motion to help speed up the process in your cylinder head department. Your top end technician is sure to appreciate the effectiveness of this quality built tool the first time it's put into service. It comes complete with 2 cups, with replacements also available and sold separately. Quality pit tools available 24/7 right here on our website! GoNitrolink.com
Ultra-Sturdy Cylinder Head Holder
One more specialty tool right here to help make your job a little easier! This durable Ultra-Sturdy Cylinder Head Holder is one of those items that if you use it once, you'll wonder how you ever managed without it. This one fits most any style cylinder head and holds it securely at a 60° angle, perfect for any type of service. And the 3-piece design utilizes a handy tie rod on one side to help prevent tipping. You're only a couple clicks from having one on the way, so order today!
Economy Cylinder Head Holders
If you're a racer on a budget, then "Nitrolink" is always happy to help keep you out there going rounds! So, lets offer a brand new set of Economy Cylinder Head Holders ready to help do just that. These are made of durable steel and designed to hold your cylinder head with either side up. The tapered pins fit any size stud/bolt holes and loosen with a twist. They're perfect for changing valves or springs, or guide knurling, with plenty of clearance to remove arbors and reamers. They're compact and store away quickly and easily in your race shop or trailer. Efficiency counts on race day... So order a set today!
Price
$147.99 – $163.99Price range: $147.99 through $163.99
Total
$147.99 – $163.99Price range: $147.99 through $163.99
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Price
$47.99 – $49.99Price range: $47.99 through $49.99
Total
$47.99 – $49.99Price range: $47.99 through $49.99
Adjustable Magnetic Dial Indicator Base
This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.
Choose Magnetic Base with or without fine adjustment in the "options" menu below.
Piston Ring Filer Tool
If you've been looking for a specialty tool that can perform two jobs equally as well then check out this brand new Piston Ring Filer Tool that can not only deliver a clean, precise end gap on your piston rings. But also help you with your valve stem clearance as well. It's equipped with a 120 grit silicone carbide wheel that holds its shape. And 2 small bumper stops to help secure your piston ring for nice accurate cut. It has provisions to mount to your work bench if you choose. Or small enough to store away nicely in your race trailer. Order one today... And the problem goes away!
Valve Lapping Sticks
Or, if you prefer to keep everything old school, then "Nitrolink" is here to help with one of these brand new Valve Lapping Sticks to make sure you're ready for the next round! No rocket science here, just a good quality tool that's comfortable to use and correctly balanced for optimum efficiency. It measures 8 5/8" long and comes equipped with a small and large, (1 1/8" and 1 3/8") cup on each end. Specialty pit tools available 24/7 right here on our website!
Digital Valve Spring Tester
Efficiency at the track, as well as back at the race shop has always been a key component to winning races! And having access to the right tools to accomplish certain jobs quickly and easily makes all the difference! This brand new Digital Valve Spring Tester is sure to deliver everything you would expect, and then some... This quality unit is made of 6061 T-6 billet aluminum and equipped with 2" diameter plates that can handle almost any spring on the market and has a 5" travel capacity. The easy access controls on the front of the tester, along with the large, easy-to-read numbers on the back-lit screen makes it a breeze to run thru a set of springs in no time. It's capable of testing springs up to 1500 lbs; in 1 pound increments, with a digital travel readout in .001" increments. Equipped with a rotatable adjustable stop for fast measuring of open and closed spring pressures. And 3 mounting locations on the handle allow you to adjust the length for increased torque. The simple to use travel stop with 2 set screws is perfect for setting an exact position, allowing repeated testing at a specific installed spring height, or wide open lift (near coil bind). This unit is switchable from pounds to kilograms and operates on one 9V battery that's also included. Order one here today, then get ready to go to work!
