Alan Johnson 392 Hemi Blower Manifold
Buy this one right here today... Without having to wait months for delivery!!! Check out this slightly used Alan Johnson 392 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This one's the upgraded light weight magnesium 6 bolt style, that's in great shape and free of any damage or repairs. It measures right at 5 7/16" tall. With the Blower opening at the top measuring 4" wide by 13 5/8" long. It has provisions to run port nozzles if you choose. Otherwise, just plug them off. And it's also set up to run the standard, large size burst panel in the front (sold separately). This manifold is o-ring ready at the top and can work with most any 6-71 to 14-71 roots style superchargers. And could be used with any 392 Hemi 6 bolt style Cylinder Heads... Save more, Race more, Win more! GoNitrolink.com
Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
Used PSI Set-Back Blower Snout & Coupler
When it comes to state of the art superchargers and components, PSI delivers unmatched quality and craftsmanship! And this slightly Used PSI Set-Back Blower Snout & Coupler is a perfect example! It works in conjunction with your PSI roots style supercharger that sits on top of your set-back style blower manifold. It's measures 11 1/2" long flange to flange and mounts to your front cover with 12 total 5/16" size bolts (not included). It's o-ring equipped on one side for a secure seal and utilizes the standard blower pulley bolt pattern on the other. The slotted area in front was designed to work with your snout clamp style belt guard (sold separately). And the steel shaft and coupler are also included to complete the package. This is the last one we have so if you don't want to buy new, then here's your chance to save... Order today!
Gibson-Miller Blower Front Cover & Snout
When it comes to outfitting your race car with hard to find replacement components just like this slightly used Gibson-Miller Blower Front Cover & Snout then you're definitely going to want to check back often right here! This money saving package is in nice shape, free of any damage or repairs and offers an anodized aluminum front cover, light weight 6 1/2" magnesium snout, starter bracket, 1 1/4" diameter (24 spline) coupler and ARP 12pt. mounting hardware all for one low price! Save more, Race more, Win more... GoNitrolink.com
Price
$439.95 – $598.95Price range: $439.95 through $598.95
Total
$439.95 – $598.95Price range: $439.95 through $598.95
"Nitrolink" offers a complete line of all Littlefield Products.
Littlefield Polished Blower Snouts
When it comes to blower components, it's not always a smart move to go with the least expensive brands available. Because on the race track, horsepower always finds the weakest parts, right! So lets offer top of the line quality at a fair price right here with these
Littlefield Polished Blower Snouts. Made of aircraft-grade billet aluminum and available in a variety of sizes sure to fit your specific application, these premium snouts are available in 3 7/8", 5 1/8", 6", 7" and 8 5/8" lengths. They're loaded with a double-ball bearing and equipped with premium oil seals. The shaft is made from 4100 heat-treated steel delivering one of the strongest and most reliable on the market. These high performance blower snouts have consistently proven themselves over the years that they can stand up to the most demanding racing conditions, then be ready for the next round!
Choose Snout Length needed in the "options" menu below.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Front Bearing Plate
If you need one, then here it is! This Used Kobelco Front Bearing Plate is anodized and made of cast aluminum. This hard to find item does show some minimal wear and the bearings should be replaced but if you can't locate one, but need one we will price it accordingly. It utilizes the teflon strip feature for extra added performance and if this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
BRAND NEW!!!
Magnesium Blower Snout
Light weight & hard to find are 2 words that best describe this brand new Magnesium Blower Snout that's perfect for all our weight conscious customers out there! And this one's sure to deliver the quality and craftsmanship you've come to expect right here! It's the light weight upgraded magnesium 6 bolt style, that measures 3.9" long. And is in excellent shape, has a nice brilliant shine and has never been down the race track. And it comes complete with a brand new Coupler, Gasket and Hardware..."Supercharged Savings" daily at GoNitrolink.com
Gibson-Miller Blower Rear Cover
If you're looking for those hard to find replacement components like this slightly used Gibson-Miller Blower Rear Cover then lets get this one on the way to your race shop quickly... And save you some hard earned cash at the same time! It's in great shape, free of any damage or repairs, is made of light weight magnesium and also includes all the ARP 12pt. mounting hardware needed to get the job done right... Unmatched customer service, right here! GoNitrolink.com
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Blower Front Cover
Check out this slightly Used Kobelco Blower Front Cover that's anodized and made of cast aluminum. This one's free of any damage or repairs and comes complete with a front cover bearing and pressure relief valve already installed. If this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Set-Back Blower Snout Strut Kit
Another quality component specifically designed to deliver both performance and durability!!! And that's exactly what you'll find right here with this brand new Set-Back Blower Snout Strut Kit that offers all you racers running the longer style blower snout extra added support along the bottom to help avoid costly damage during competition. It's the same style used by the majority of the top nitro teams on tour because it allows you to quickly remove the supercharger without having to worry about unbolting the struts, due to the super trick bracket design that fits over your idler bracket. All 4 brackets included are made of billet steel and the 2 adjustable arms are billet aluminum. PLEASE NOTE: This set-up was designed specifically to work with the snout clamp style belt guard/starter bracket and angled set back style idler bracket only. Give us a call if you have any questions, as we're always happy to help! Race, win, repeat... GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Injector Spacer
Order right here and save both time and money on this nice Used Blower Injector Spacer that installs quickly in between your blower case and injector. This one's made of light weight aluminum and measures 1" tall, is o-ring ready on both sides with mounting holes measuring 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. Save GoNitrolink.com to your favorites and check back often because there's more quality components on the way!
