Fowler F-11 Cast 6-71 Blower
A top of the line racing component at better than half off the price of new!!! Is exactly what you'll find right here with this slightly used Fowler F-11 Cast 6-71 Blower that was just freshened up at the Blower Shop, with zero runs! This one's ready to be pressed into service right out of the box and equipped with quite a few extra's added in to make the deal that much better! Let's start with the 6 bolt billet blower snout that measures 3 13/16" long. The cast aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear, with brand new teflon strips already installed. And we'll also include a set of brand new gears and front seals as well. Top opening measures 7" long x 4 7/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the standard square opening... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $9,000 bucks to do it!!! But not here... Not today! This one's in stock and ready to ship with one phone call... Then figure out where to spend that extra $5,100 bucks you just saved right here by not buying new elsewhere! Save more, race more, win more! GoNitrolink.com
Priced to move at: Only $3895. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Fowler F-11 Billet 6-71 Blower
Half off the price of new for a state of the art Supercharger is what you're looking at here, with this slightly used Fowler F-11 Billet 6-71 Blower that was just freshened up at the Blower Shop, with zero runs... Install this one right out of the box, then tow to the lanes! It's equipped with an upgraded billet case, along with quite a few extra's added in to make the deal that much better! Let's start with the upgraded 12 bolt billet blower snout that measures 3 13/16" long. The billet aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear and loaded with brand new teflon strips already installed. And brand new front seals are also included as well. Top opening measures 9 3/4" long x 4 15/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the popular small delta style front opening for optimum efficiency... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $10,000 bucks to make it happen!!! But not here... Not today! Get this one on the truck and headed your way with one phone call... Then figure out where to spend that extra $5,000 bucks you just saved right here by not buying new elsewhere! The road to the winners circle is shorter than you think! GoNitrolink
Priced to move at: Only $4995. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Blower Base Gaskets
Let GoNitrolink.com save you both time and money on all your consumables as well... And we'll keep offering products like these Blower Base Gaskets to help keep your race team budget in check! These are the upgraded nitrile style for better performance and longevity. And the standard size that could work with most any 6-71 to 14-71 roots style supercharger. They feature a .032" thickness, with a 4" x 12 1/4" center opening without the center tab. And they work with your standard 7/16" size blower studs. This is one of those items that definitely needs to be put in the race trailer before the race weekend... Remember, don't forget your spares!
Sold separately.
Price
$26.57 – $28.97Price range: $26.57 through $28.97
Total
$26.57 – $28.97Price range: $26.57 through $28.97
Blower Base Gasket - Fits 6-71 or 8-71
Attention in the pits!!! If you're running a 6-71 or 8-71 supercharger on your race car, then "Nitrolink" is here to help by offering this style Blower Base Gasket - Fits 6-71 or 8-71 to work with your application. These are made from the highest quality materials and precision-cut for an excellent seal and fit. And they're available in either 1/32" or 1/16" thickness size. So, if you need one... Here they are! If you have one, then don't forget your spare!
Sold individually. Choose thickness size in "options" menu below.
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Billet Blower Pulley Spacer
Making sure your top a bottom blower pulleys are lined up and working together for maximum performance is key. Proper alignment also helps extend blower belt life and reliability on the race track. And the way you adjust for that is by installing a slightly Used Billet Blower Pulley Spacer like this one. It's in nice shape, with the standard bolt pattern using your 3/8" size bolts (not included). It measures 1" thick, however can be turned down if needed to fit your exact specifications. And this one's sure to save the do it yourself racer a few bucks not having to buy new elsewhere!
Blower Stud Kits
The new racing season is in full swing! Making this the perfect opportunity to get a jump on this money saving offer... We have a limited supply of BRAND NEW Blower Stud Kits that are ready to ship out immediately. And check out the craftsmanship on this set... Awesome! Mandatory in both NHRA & IHRA competition, this set of (8) total could work with any roots style supercharger. And can be used on either regular or set-back style manifolds. They're machined from high quality aluminum, anodized black and equipped with a hex top for easy installation or removal. They measure 2.585" over all length, with a 7/16" size, #20 thread on top. And a 1/2" size, #13 thread going into the Manifold. Nuts sold separately. Supplies are limited so, if you need a set... Here they are! If you have a set... Then here's your spares!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Blower Starter Bracket
If you're running a blower starter, then it certainly pays to keep all the other little related components in good shape to insure your car fires up every time! So, check out this slightly Used RCD Blower Starter Bracket that's almost new and ready for action! It's made of light weight billet aluminum and in excellent shape with no damage or repairs. This one's designed to works with the SSI, or Kobelco superchargers and can definitely help prevent a lot of grief on the starting line when it comes to installing or removing your blower starter quickly and efficiently. It never hurts to prepare, order this one for a spare!
Slightly Used
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts
Now here's a smoke'n deal that's sure to help get all our valued customers on a budget ready for race day! We have a large supply of RCD/Gates "1 Run" 1595 PolyChain GT Blower Belts for sale and ready to ship! These are the stronger nitro kevlar models, that work with the 11mm pulleys and measure 84mm wide, have a 145 tooth count, with a GT tooth profile. They're slightly used and free of any visible damage, weather checking, or chaffing. Outside edges are nice and sharp with no fraying or visible wear. All teeth are free of any damage and ready to go to work! Brand new these sell for right at $280 bucks each. So if you need one, here it is! If you have one, don't leave home without a spare!!! Priced to move at only: $99.95 ea.
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Blower / Injector Spacer
Slightly used, in great shape and ready to hopefully join you in the winners circle is this
Used Blower / Injector Spacer that installs quickly in between your blower case and injector. This ones made of light weight aluminum and equipped with 2 air bleed fittings on the front edge for fine tuning your idle setting. It measures 1" tall, o-ring ready on both sides and mounting holes measure 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. One more item off your check list that's in stock and ready to ship!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Injector Spacer
Order right here and save both time and money on this nice Used Blower Injector Spacer that installs quickly in between your blower case and injector. This one's made of light weight aluminum and measures 1" tall, is o-ring ready on both sides with mounting holes measuring 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. Save GoNitrolink.com to your favorites and check back often because there's more quality components on the way!
Set-Back Blower Snout Strut Kit
Another quality component specifically designed to deliver both performance and durability!!! And that's exactly what you'll find right here with this brand new Set-Back Blower Snout Strut Kit that offers all you racers running the longer style blower snout extra added support along the bottom to help avoid costly damage during competition. It's the same style used by the majority of the top nitro teams on tour because it allows you to quickly remove the supercharger without having to worry about unbolting the struts, due to the super trick bracket design that fits over your idler bracket. All 4 brackets included are made of billet steel and the 2 adjustable arms are billet aluminum. PLEASE NOTE: This set-up was designed specifically to work with the snout clamp style belt guard/starter bracket and angled set back style idler bracket only. Give us a call if you have any questions, as we're always happy to help! Race, win, repeat... GoNitrolink.com
