649 ITEMS
Sort
426 Hemi Rear Main Seal Kit
If you're thinking about freshening up your primary engine in your race car, or spare engine in your race trailer then don't forget a 426 Hemi Rear Main Seal Kit to get the job done right! This set is exactly what's needed if your running a TFX, Brad, or Keith Black block. And it could prevent a whole lot of problems by your team not being shut off on the starting line because of an oil leak. A few clicks of your mouse and it's on the way!
426 Hemi Short Block Covers
So, if you're running an Alan Johnson, Brad, or Keith Black Block, then this next item should be right up your alley! Check out these 426 Hemi Short Block Covers that I'm sure every hemi racer out there can put to work immediately! Way to much time and money goes into tear-down, assembly, installation, etc; to even think about having dirt, metal shavings, hardware, or other foreign objects fall down inside your short block. These covers come in a 2 piece set and are made from .050 aluminum and powder coated black. They accept either 1/2" or 9/16" size head studs. And cover the whole top part of the short block as well as all cylinders. They clean up quickly, store away almost anywhere and can't wait to start protecting that spare short block in your race shop, trailer, or pit area!
Price
Price range: $35.50 through $88.00
Total
Price range: $35.50 through $88.00
We offer a complete line of all Taylor Motorsports Products!
Absorbent Diaper Liners
"Nitrolink" is you're one stop shop for consumables as well... So, lets offer these handy Absorbent Diaper Liners available in 2 sizes, for Funny Cars or Dragsters. They come equipped with velcro strips at the top for easy installation or removal on both sides of the diaper. They're sold by the pair and work great with the small absorbent pillow (sold separately) that fits on the bottom of the diaper for a complete package. Don't risk being shut off at the line because of a couple small drips... These could possibly help!
Choose size needed in the "options" menu below.
Absorbent Pillow price includes 1 total.
Price
Call for Price
Total
Call for Price
Adjustable AN Fitting Line Wrench
Attention all Crew Chiefs... Before you tow up to the starting line, make sure you're fully prepared with an Adjustable AN Fitting Line Wrench just like this one. We've all seen it before... A Driver being told to shut off because of a loose fitting prior to a run. And more often than not, this style wrench might have made all the difference! Top quality craftsmanship second to none is offered right here with a finish and feel that make this handy pit tool the first one out of the tool box on race day. The anodized red finish makes it easy to spot. And it's thin light weight profile and handy end hook make it perfect for storing in your pocket or attaching it to your belt. It adjusts to a tight fit on any AN Fitting from -3 to -12 size. And is equipped with a handy Dzus Button Tool at the end of the handle that just eliminated having to carry yet another tool. So, you know how it works... Now that you've seen it... Guess what tool you'll wish you had the next time you go racing! Order yours today!
Priced to move at: Only $99.95
Price
Price range: $47.99 through $49.99
Total
Price range: $47.99 through $49.99
Adjustable Magnetic Dial Indicator Base
This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.
Choose Magnetic Base with or without fine adjustment in the "options" menu below.
Air Powered Valve Lapping Tools
The ultimate in Air Powered Valve Lapping Tools can be found right here with one of these brand new quality built time savers that can't wait to go to work for your race team!
This style operates on 90 PSI and is sure to streamline your operation in the cylinder head assembly department. It comes complete with 3 different cup sizes (7/8", 1-1/8" and 1-1/4") and 3 valve stem adapters. Replacement Cups are also available and sold separately. The road to the winners circle may be shorter than you think! GoNitrolink.com
Price
$297.95
Total
$297.95
Air Tank & Tire Gauge Kit
Setting tire pressure in the lanes right before you send it just became a whole lot easier with this brand new all in one Air Tank & Tire Gauge Kit that's ready to provide everything needed right at your fingertips! No more dragging air lines around the car in your pit area, as this kit offers a light weight polished aluminum tank. And a 0-60 psi digital tire gauge that's back-lit for night racing. This style has the 5 gallon size tank that measures approx 15x13 with the standard 125 psi maximum pressure capacity. It's equipped with an analog filler gauge on the top and rubber feet on the bottom. And it's exclusive special design inlet valve makes fill up's a breeze, in 15 seconds or less. The digital tire pressure gauge measures 2 1/2" in diameter and is equipped with an air pressure release button for quick, accurate tire pressure adjustments. And it works with a 17" hose with a swivel angle chuck on one end. And air trigger with 4 feet of air hose ready to provide plenty of length to work with on the other. Also included is a tire gauge holder bracket on the tank and an alternate swivel ball chuck if you need it... Specialty pit tools, consumables and unmatched customer service right here! GoNitrolink.com
AJPE 426 Hemi Billet Block
The coolest place on the planet to buy all your top of the line racing components like this slightly used, late model AJPE 426 Hemi Billet Block is right here at GoNitrolink.com...
And this one's been freshened up and has not been run since... Line bore, cam journals and main caps were all gone over, so you know your money was well spent here! And it features a standard deck, standard mains, 48 degree raised cam. And loaded with 4.187 sleeves, has a 1 1/16" lifter bore size, a standard 54mm cam journal size and ready to accept you're 9/16" size head studs (not included). It's been professionally repaired (see photos) and has been machined down .015 off the deck surface, with all the sleeves having over-sized registers. Plus, the best news is this one won't cost you $10,000 bucks, plus the wait time to buy a new one elsewhere! This block is in stock, ready to ship... And definitely ready to go to work!!!
Priced to move at Only: $5595. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Tray in photos not included.
Price
$2,495.00
Total
$2,495.00
Alan Johnson 392 Hemi Blower Manifold
Buy this one right here today... Without having to wait months for delivery!!! Check out this slightly used Alan Johnson 392 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This one's the upgraded light weight magnesium 6 bolt style, that's in great shape and free of any damage or repairs. It measures right at 5 7/16" tall. With the Blower opening at the top measuring 4" wide by 13 5/8" long. It has provisions to run port nozzles if you choose. Otherwise, just plug them off. And it's also set up to run the standard, large size burst panel in the front (sold separately). This manifold is o-ring ready at the top and can work with most any 6-71 to 14-71 roots style superchargers. And could be used with any 392 Hemi 6 bolt style Cylinder Heads... Save more, Race more, Win more! GoNitrolink.com
Price
$2,495.00
Total
$2,495.00
Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
Price
$4,295.00
Total
$4,295.00
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Alan Johnson 426 Hemi Rocker Assembly
Probably one of the most popular hard to find Hemi items would be a top of the line complete Alan Johnson 426 Hemi Rocker Assembly. This hi-ratio set with Alan Johnson billet stands and upgraded Titanium Shafts is loaded with a BRAND NEW set of Stage 5 (1.75 ratio) Intake Rockers. And a slightly used set of Cluff (standard ratio) Exhaust Rockers. All Rockers are equipped with the larger size 7/16" adjusters with the 3/8 ball, which is pretty cool, because now you don't have to switch wrenches etc; to adjust both your Intake & Exhaust Rockers. All Stands, Shafts, Adjusters & Nuts are in great shape with no damage. And all shims & springs are brand new and included as well. This set-up works with your BAE, Dart, or Alan Johnson Fuel Heads that bolt up to your Keith Black, BAE, or TFX Rodeck cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc:) these will not adapt to your application.
Brand new price to duplicate everything you see here is going to set you back over $9500 Bucks!!! But not here... Not today! This complete set-up is definitely some of the best equipment money can buy for strength, durability and performance. And ready to install right out of the box and go racing... Save more, Race more, Win more! GoNitrolink.com
Price
Call for Price
Total
Call for Price
Alan Johnson Stage 1 Nostalgia Cylinder Heads
Check out this "complete" set of Alan Johnson Stage 1 Nostalgia Cylinder Heads then you'll know one of the reasons why many of the top nostalgia nitro teams on tour are laying down those kind of numbers on race day! This set is the current style, popular because they utilize the smaller intake & exhaust runners making them perfect for use in Nostalgia Top Fuel, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is the single plug style, set up to run 4 spark plugs per head. Both are in excellent shape and work with your standard deck TFX Rodeck, BAE, or Keith Black cast or billet block, using your standard deck fuel head style manifold. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in nice shape. And they're loaded with a slightly used set of Victory 2.375 titanium intake and Manley 1.925 exhaust valves, with Victory locks & retainers. And a set of Manley Dual Intake and PAC Triple Valve Springs are also included as well. Plus, we'll include a complete set of inner head studs, intake manifold studs, header studs and valve cover studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running... So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is complete, available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $4500.00 set.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
There’s only 2 places you can go to get your “Official Nitrolink Racing Gear” and that would be either in our pit area, or right here on our website!
Check out these awesome looking Nitrolink Racing T-Shirts that are being offered right here before you can even get them at the race track… This first addition design is available at a lower than normal price to help introduce our brand new website and services to all or valued customers! These high quality custom printed shirts are made of 100% cotton and come in black with multi-color printing on both the front and back. Join our winning team today and show everyone you know exactly where to go for high performance nitro and alcohol racing components! GoNitrolink.com
