TFX Oil Pan Gaskets
GoNitrolink.com for all your hi performance gaskets and consumables! And if you happen to be running a TFX block, then you know exactly how to put one of these brand new TFX Oil Pan Gaskets to work! These are made by Mahle and consist of a composite material, with a steel core and teflon coated on both sides to help prevent oil saturation. They're NHRA nitro legal, measure .100" thickness, are sold separately and available for both TFX '96 late, or '92 early, engine blocks. We offer a large selection of all the popular hi performance racing gaskets including cylinder head, exhaust, oil pan, blower and injector gaskets to make sure we have you covered for the weekend!
Choose late or early block style in the "options" menu below.
We offer a complete line of all Racepak products!
Racepak Drive Shaft Sensor Mount Bracket
This brand new Racepak Drive Shaft Sensor Mount Bracket is made of light weight billet aluminum, anodized black and allows you to fasten your 5/16" Racepak driveshaft sensor to your 9" center section. The road to the winners circle may be shorter than you think! GoNitrolink.com
Price
$41.95 – $43.95Price range: $41.95 through $43.95
Total
$41.95 – $43.95Price range: $41.95 through $43.95
We offer a complete line of all Automan products!
Billet Burnout Stops
It's sleek, it's profiled, it's just plain awesome! These super trick Billet Burnout Stops are a team owners best friend when it comes to keeping engine RPM at a safe level during the burnout. Installs instantly on your throttle cable by the injector throttle stop. After the back up, simply pull the ring attached to the stainless safety pin clip to remove it, then bring your driver up to the beams! They're made of billet aluminum, polished and anodized for a bright brilliant shine, to stand out so you don't forget to take them off. And they're available in 2 throttle cable sizes, 10/32" or 1/4" inch. Length may need to be adjusted if needed. Instruction sheet included... Top quality products = a top quality race team! GoNitrolink.com
Price
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Total
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Pass-Thru Analog Box Circuit Board
This brand new Racepak Pass-Thru Analog Box Circuit Board works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It's a replacement for the main circuit board in your pass-thru analog box if it gets damaged. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Price
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Total
$70.00 Original price was: $70.00.$45.00Current price is: $45.00.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak Non Pass-Thru Analog Box Circuit Board
This brand new Racepak Non Pass-Thru Analog Box Circuit Board works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It a replacement for the main circuit board in your non pass-thru analog box if it gets damaged. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
Price
$47.99 – $49.99Price range: $47.99 through $49.99
Total
$47.99 – $49.99Price range: $47.99 through $49.99
Adjustable Magnetic Dial Indicator Base
This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.
Choose Magnetic Base with or without fine adjustment in the "options" menu below.
Blower Stud Kits
The new racing season is in full swing! Making this the perfect opportunity to get a jump on this money saving offer... We have a limited supply of BRAND NEW Blower Stud Kits that are ready to ship out immediately. And check out the craftsmanship on this set... Awesome! Mandatory in both NHRA & IHRA competition, this set of (8) total could work with any roots style supercharger. And can be used on either regular or set-back style manifolds. They're machined from high quality aluminum, anodized black and equipped with a hex top for easy installation or removal. They measure 2.585" over all length, with a 7/16" size, #20 thread on top. And a 1/2" size, #13 thread going into the Manifold. Nuts sold separately. Supplies are limited so, if you need a set... Here they are! If you have a set... Then here's your spares!!!
"Nitrolink" offers a complete line of all MSD Products!
MSD Pro Mag 44 Wire Retainer
Attention in the pits!!! This MSD Pro Mag 44 Wire Retainer is the perfect item to pair up with the Pro Mag 44 Big Cap on your awesome ride. It's one and only job is to keep all wires securely attached to each wire terminal while you trip the beams at the other end! It installs easily, removes quickly and comes complete with mounting hardware included.
Choose either red or black to match your other MSD components in the "options" menu below.
Price
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Total
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Co2 Air Bottle
If you're limited on space, or just like the sleek look of this small size Co2 Air Bottle then lets continue! This one's slightly used, made of light weight aluminum and anodized black for that cool stealth look. It measures 2" in diameter, by 16" long and weighs in at 2 pounds empty. It can be used with a number of different applications to include air shift Lenco's or B&J transmissions, air timers, air shut-off switches, etc. Another "Nitrolink" super saver item to help racers on a budget keep doing what they do best!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Dragster Dual Chute Mounts
We have a few sets of slightly used Dragster Dual Chute Mounts at the race shop available and ready to ship today! They're sold in pairs, made of chrome moly tubing and anodized black for that cool stealth look. Tube diameter measures 7/8" total. And both weigh in at a light weight .7 pounds. They can be welded up as is, or fit inside your existing slightly larger size diameter tubing. Then held in place by your common style quick release pins, (not included). Then removed with your chute packs, etc; to allow you to pack both chutes on the ground, on top of a milk crate, etc; for a quick, easier pack. Another money saving item to help racers on a budget get to the winners circle!
Sold in sets.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Blower Starter Bracket
If you're running a blower starter, then it certainly pays to keep all the other little related components in good shape to insure your car fires up every time! So, check out this slightly Used RCD Blower Starter Bracket that's almost new and ready for action! It's made of light weight billet aluminum and in excellent shape with no damage or repairs. This one's designed to works with the SSI, or Kobelco superchargers and can definitely help prevent a lot of grief on the starting line when it comes to installing or removing your blower starter quickly and efficiently. It never hurts to prepare, order this one for a spare!
