Manifold Lapping Plates
Keep that supercharger on your race car performing at it's best with one of the nicest Manifold Lapping Plates on the market to help keep it flat and true! This heavy duty high quality specialty tool is brand new and the perfect item to have at your race shop, or in your pit area on race day to help your manifold provide a nice even surface for a complete seal. This one's made of billet aluminum and comes complete with 1 disposable self adhesive sheet of sand paper. (Extra sheets sold separately). It measures 1" thick and is equipped with 2 comfortable handles to help deliver a consistent result. It stores away nicely in your race trailer or shop and ready to go to work right when you need it most! Top quality right here! GoNitrolink.com
Extra sheets of sand paper are also available right here on our website.
Camshaft Checker Tool
So, how about we streamline your race team a little more with a slightly used Camshaft Checker Tool that's ready to be pressed into service right out of the box! This one works with your 426 Hemi equipped with a .904 lifter bore size only. It's made of light weight aluminum and comes with an easy to read gauge that helps you degree your camshaft by displaying your cam lift. Plus, it's compact size makes it easy to store away nicely in your race trailer or race shop when not in use... Specialty Pit Tools 24/7 right here! GoNitrolink.com
We offer a complete line of all Lenco products!
Billet Drive Shaft Cover
When unmatched quality and craftsmanship is what you're looking for, then check out this brand new Billet Drive Shaft Cover that's ready to offer that and a whole lot more! This one's made by Lenco and set up to work with either the CS-1, or CS-2 style transmission. It's anodized black for that awesome look with the complete unit measuring 8" long including the flange. The tube cover itself measures 6" long and has a 3" inside diameter. It can be installed or removed quick and easy in your front engine dragster, funny car, altered, etc; in between rounds on race day. And includes the transmission flange, driveshaft cover, stainless clamp with safety pin and transmission housing rear seal... And don't forget about the unmatched customer service! GoNitrolink.com
Please choose your Output Shaft size (32 Spline or 35 Spline) in the "Options" menu below.
Rod Cap & Bearing Holder
As you know, organization has always been key to a successful race weekend! So, lets get your race team set up with a brand new Rod Cap & Bearing Holder like this one to make inspection in between rounds quick and easy! This professionally made, high quality rack holds all your rod caps and rod bearings together securely. And it's clearly marked so you know exactly what cap and bearing went where. It's made of durable aluminum, cleans up easily after use and it's compact size (5 3/4"W x 12 9/16"L x 1 1/2"H) stores away nicely in your race trailer or at your race shop when not in use. Specialty pit tools, racks and a whole lot more! GoNitrolink.com
Lenco Front Seal Transmission Plug
Another small item that shows you pay close attention to all the details! Check out this brand new Lenco Front Seal Transmission Plug that's ready to be pressed into service at the race shop or in your pit area. It works with the Lenco CS-1 style transmission, is made of billet aluminum, anodized black with an o-ring. And fits on the front seal area to help keep oil in and unwanted debris out while your transmission is out of the car. And if you carry a spare Lenco in the trailer, then here's your chance to outfit that one as well to help keep it clean and ready for showtime! Race, Win, Repeat... GoNitrolink.com
Intake Manifold Cover
This brand new Intake Manifold Cover is the perfect item to keep out dust and debris while your servicing your supercharger. It's made of 1/16" aluminum, anodized black and measures 12 1/2" wide by 13 3/4" long. And also serves as a cover to keep your competition "in the dark" from seeing any manifold design secrets. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
Air Tank & Tire Gauge Kit
Setting tire pressure in the lanes right before you send it just became a whole lot easier with this brand new all in one Air Tank & Tire Gauge Kit that's ready to provide everything needed right at your fingertips! No more dragging air lines around the car in your pit area, as this kit offers a light weight polished aluminum tank. And a 0-60 psi digital tire gauge that's back-lit for night racing. This style has the 5 gallon size tank that measures approx 15x13 with the standard 125 psi maximum pressure capacity. It's equipped with an analog filler gauge on the top and rubber feet on the bottom. And it's exclusive special design inlet valve makes fill up's a breeze, in 15 seconds or less. The digital tire pressure gauge measures 2 1/2" in diameter and is equipped with an air pressure release button for quick, accurate tire pressure adjustments. And it works with a 17" hose with a swivel angle chuck on one end. And air trigger with 4 feet of air hose ready to provide plenty of length to work with on the other. Also included is a tire gauge holder bracket on the tank and an alternate swivel ball chuck if you need it... Specialty pit tools, consumables and unmatched customer service right here! GoNitrolink.com
"Head on Engine" Valve Spring Tester/Remover - Fuel Heads
How much valuable time would you save in between rounds if you didn't have to remove your injector, supercharger, intake manifold and cylinder heads just to test or replace valve springs? Check out this brand new, state of the art "Head on Engine" Valve Spring Tester/Remover - Fuel Heads that was specifically designed to do just that! This 426 hemi valve spring maintenance tool can be ordered to work with either double or triple valve springs. And it comes with everything needed to test and or remove valve springs with all the components mentioned above still on the engine... How cool is that!!! On race day, this could be a real game changer right here! When ordering, please specify what rocker arms and stands you're running and we'll take it from there... Race, Win, Repeat! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Hemi Sleeve Alignment Tool
How about another super handy pit tool that's sure to make your life a whole lot easier at the race shop, or on race day! Check out this brand new Hemi Sleeve Alignment Tool that's ready for action right out of the box! This one's made of billet aluminum and it's universal design allows it to work with your 4.187" to 4.700" sleeve sizes. It's anodized black and equipped with a long size handle for a precise, proper installation. It works with both the 392 or 426 hemi's and definitely the best choice to help avoid any costly damage to your sleeves during installation... Racers helping Racers do what they do best! GoNitrolink.com
Official Nitrolink Racing Leather Sleeve Jackets
There's only 2 places you can go to get your "Official Nitrolink Racing Gear" and that would be either in our pit area, or right here on our website!
You won't be disappointed with the quality and style of these Official Nitrolink Racing Leather Sleeve Jackets that are being offered right here before you can even get them at the race track... These custom embroidered top of the line heavy jackets are the "real deal" and not the common less expensive lighter style we're all familiar with. They're made in the U.S. and perfect for those cool winter nights waiting in the staging lanes. They offer a black wool body, genuine leather black sleeves, outside pockets, pleated lining and an inside pocket. And include your choice of either the Dragster or Funny Car logo stitched on the front. And they're available in all the popular sizes. With proper care, these comfortable high quality jackets will last for years... Join our winning team today and show everyone you know exactly where to go for high performance nitro and alcohol racing components! GoNitrolink.com
Choose either Dragster or Funny Car logo and size in the "options" menu below.
Have a sizing questions? Call us at: (916) 425-1427 anytime!
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson CarbonX Driver Headsock
Quality and comfort is offered right here with this brand new Simpson CarbonX Driver Headsock for one more layer of extra added protection on race day! This one's NHRA "tech friendly" with SFI 3.3 tags and fits any full face helmet contour. It's CarbonX base layer is moisture wicking and it comes in your choice of either the dual eyeport opening in black, or single eyeport opening in either black or white. Order top quality drivers equipment 24/7 right here at: GoNitrolink.com
Both styles are also available in Nomex material if you prefer for the same price.
"Nitrolink" offers a complete line of all Simpson Race Products!
Simpson CarbonX Driver Socks
Attention All Drivers!!! Both top of the line quality and comfort are offered right here with a brand new pair of Simpson CarbonX Driver Socks for more extra added protection on race day. These come complete with SFI 3.3 tags and are knitted from patented CarbonX yarn and flame-resistant, super-washed merino wool. They're equipped with a reinforced toe, heel and cushioned sole for extra durability. And available in one color black, with one size fitting most. Drivers helping Drivers do what they do best! GoNitrolink.com
