Price
$538.00 – $547.00Price range: $538.00 through $547.00
Total
$538.00 – $547.00Price range: $538.00 through $547.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Oil Filter & Mount
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This combination System 1 Pro Series Oil Filter & Mount is made of billet aluminum and NHRA approved for Top Fuel and Nitro Funny Car competition. Or, available for Top Alcohol Dragsters, Funny Cars, Pro Mod, etc. It's anodized black for that cool stealth look. And was designed with the filter canister housing and mount permanently affixed as one unit. The reusable filter element inside can be easily inspected, or serviced by simply removing the inspection cap. And it's equipped with the correct 75-micron element for use with heavy weight oil. The mount has two 5/16 -18 threaded holes on a 2” center and two AN -12 fittings on top. Order one today... And the problem goes away!
Choose your fuel application in "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
New 426 Hemi Coated Nitro Pistons
Are you ready to score big time on a set of (10) New 426 Hemi Coated Nitro Pistons made by Diamond Pistons. And if you're looking for the 4.187 bore size then it's your lucky day! This complete set, plus two spares is ready to accept your 1.156" pin size, with a 1.600 compression height and standard ring grooves. This style piston can be used in Nostalgia Funny Car, Fuel Altered, or Drag Boat applications. We only have one set available, so click on "buy it now" because just like on the starting line, reaction time helps win the race! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Now here's another quality racing component that won't empty your bank account nearly as quick as buying new! This slightly Used Waterman Wet Sump Oil Pump is your standard gear style, equipped with an outside oil pressure adjustment valve. Recently inspected, the inside of the housing is in great shape with the gears showing normal minimal wear. Pump is set up with (2) #12 fittings for your oil filter, (1) #16 fitting for your oil pick-up and (1) #6 fitting for your oil pressure reading. Save BIG $$$'s here, so order today!
Another BRAND NEW item... Without the brand new price!!!
CP 426 Hemi Coated Nitro Pistons
How about another brand new product, without the brand new price tag! This set of (10) brand new CP 426 Hemi Coated Nitro Pistons are the 4.187 bore size and ready to accept your 1.156" pin size, with a 1.715 compression height. Ring groove sizes are as follows:
Top = .0745, Second = 1/16", Oil ring = 3/16" size. We only have one set available, so click on "buy now" because just like on the starting line, reaction time helps win the race! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
CP Carrillo 426 Hemi Coated Nitro Pistons
Lets showcase another brand new product, without the brand new price tag! This set of (10) brand new CP Carrillo 426 Hemi Coated Nitro Pistons are the 4.187 bore size and ready to accept your 1.156" pin size, with a 1.620 compression height. Ring groove sizes are as follows:
Top = 1/16", Second = 1/16", Oil ring = 3/16" size. We have several sets available, so click on "buy now" and get ready to save hundreds right here... Save, Race, Win, Repeat! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
Arias 392 Hemi Coated Nitro Pistons
Great News!!! Here's another brand new product, without the brand new price tag! This set of (10) brand new Arias 392 Hemi Coated Nitro Pistons are the 4.125 bore size and ready to accept your 1.094" pin size, with a 1.600 compression height. Ring groove sizes are as follows:
Top = .0745", Second = .0641", Oil ring = .1880" size. We have several sets available, so click on "buy now" and get ready to save hundreds right here... Quality Racing Components + Unmatched Customer Service = GoNitrolink.com
Other Compression Heights Available. Call: (916) 425-1427 for details.
"Nitrolink" offers a complete line of all MSD Products!
MSD Super Conductor Pro Mag 44 Plug Wire - 300' Bulk
Worn out spark plug or coil wires can cause a variety of problems on the race track. However, it's one of those "easy fixes" if you have all the right materials handy to correct the problem yourself. Here's the solution! This MSD Super Conductor Pro Mag 44 Plug Wire - 300' Bulk for your Pro Mag 44 is available in a 300 foot roll. And allows you to easily make up the exact lengths needed for your specific application. The copper core inside, as well as the proprietary blend of silicone and synthetic material that make up the sleeve outside create a highly resistant high heat shield that also helps protect against abrasion and tears. This is the exact wire material that withstands the weekly battle in Top Fuel, so make up a set for your race car while your at home watching T.V. tonight!
Choose either red or black to match your other MSD components in the "options" menu below.
Also available in the smaller 100 foot roll.
"Nitrolink" offers a complete line of all MSD Products!
MSD Dual Mag Hemi Wire Kit - Pro Mag 44
Dual Mags!!! That's just twice the fun, right? So, why not offer a MSD Dual Mag Hemi Wire Kit - Pro Mag 44 for each, to help get your ignition system back into shape right before the next race! This dual mag kit includes 2 sets of extra long 8.5mm universal super conductor spark plug wires that can be cut to your exact lengths for a clean installation. They offer a copper core inside, with a special blend of silicone and synthetic material that make up the sleeve outside to create a highly resistant, high heat shield that also helps protect against abrasion and tears. The plug tubes, are molded from a special material known for its high dielectric properties. And all elbows, end caps and screws are included as well. Plug wire boots for both ends are made of silicone, providing an excellent resistance to heat and maximum protection against spark loss. Spark plug terminals for both ends feature "Dual Crimp" terminals. One for the sleeve of the wire and another separate crimp to hold the conductor. Just a couple clicks thru our website to order... Job done!
Choose either red or black to match your other MSD components in the "options" menu below.
"Head on Engine" Valve Spring Tester/Remover - Fatheads
How much valuable time would you save in between rounds if you didn't have to remove your injector, supercharger, intake manifold and cylinder heads just to test or replace valve springs? Check out this brand new, state of the art "Head on Engine" Valve Spring Tester/Remover - Fatheads that was specifically designed to do just that! This 426 hemi valve spring maintenance tool can be ordered to work with either double or triple valve springs. And it comes with everything needed to test and or remove valve springs with all the components mentioned above still on the engine... How cool is that!!! On race day, this could be a real game changer right here! When ordering, please specify what rocker arms and stands you're running and we'll take it from there... Race, Win, Repeat! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Dan Olson Products!
TFX Funny Car Oil Pan - Olson
If you're running a TFX block then this brand new funny car dry sump style TFX Funny Car Oil Pan - Olson style offers quality and craftsmanship second to none! Taking into consideration the extreme racing conditions that only an 11,000 horsepower nitro engine can produce, installing a top of the line product is a must to keep going rounds! All nitro and alcohol pans features an o-ring equipped 3/8" billet rail, built in trap door baffle, scraper, front side and rear shelves, removable dzus fastened windage tray and large size drain plug for quick oil changes in between rounds. This style pan has a 8 qt capacity and measures the standard (23 7/8" x 11 1/4") dimensions and has a 4 9/16" depth in the front and 6 1/8" depth in the rear. And comes complete with a removable aluminum oil pick-up and your choice of either a -16, or -20 oil hose fitting. Optional weld-in aluminum oil pick-ups also available. Order yours today!
"Nitrolink" offers a complete line of all Dan Olson Products!
TFX Dragster Oil Pan - Olson
If you're running a TFX block then this brand new dragster style TFX Dragster Oil Pan - Olson style offers quality and craftsmanship second to none! Taking into consideration the extreme racing conditions that only an 11,000 horsepower nitro engine can produce, installing a top of the line product is a must to keep going rounds! All nitro and alcohol pans features an o-ring equipped 3/8" billet rail, built in trap door baffle, scraper, front side and rear shelves, removable dzus fastened windage tray and large size drain plug for quick oil changes in between rounds. This style pan has a 12 qt capacity and measures the standard (23 7/8" x 11 1/4") dimensions and has a 6.5" depth in the front and 7.5" depth in the rear. And comes complete with a removable aluminum oil pick-up and your choice of either a -16, or -20 oil hose fitting. Optional weld-in aluminum oil pick-ups also available. Order yours today!
