Dial Indicator Kit for Valve Spring Tester
If you're thinking about purchasing one of the Bench Top Valve Spring Testers we sell, or already have one... Then check out one of these brand new Dial Indicator Kit for Valve Spring Tester that can be easily added for optimum precision accuracy. It's allows you to check your installed height, or coil bind while you're testing for spring pressure without having to do it old school by using a micrometer. It installs quickly with a very small amount of light grease and your 3/16" hex with a 7/16" open end wrench to set the stop. Check out all the other specialty pit tools available right here, designed specifically to make your job that much easier!
Valve Spring Tester (in photo) sold separately.
Billet Dual Feeler Gauge Handle
At "Nitrolink" it's all about choices! So, here's one more Billet Dual Feeler Gauge Handle
if you prefer using the longer style that holds 2 separate gauges on the opposite ends of the handle. They're strong, durable, made of billet aluminum and ready to assist your top end technician when it's time to quickly run thru a set of valves. They measure 5" x 1" x .5" total and can accept various sizes of 1/2" wide feeler gauges depending on your application. And can be stacked 3-4 gauges high if you choose... Specialty pit tools 24/7 right here! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Sold separately, Gauges not included.
Price
$1,499.95 – $1,549.95Price range: $1,499.95 through $1,549.95
Total
$1,499.95 – $1,549.95Price range: $1,499.95 through $1,549.95
We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak Aluminum Flow Meters
In drag racing knowledge creates power... And having access to valuable data during a run helps assist you in knowing exactly how to manage it! And that's exactly what these brand new Racepak Aluminum Flow Meters do best! This high performance turbine-style racing component is the aluminum style primarily recommended for nitro applications. It delivers an accurate fuel flow reading allowing you to closely monitor the performance health (GPM) of your fuel pump and also confirms the function of your fuel timers and fuel system lean-outs. Flow Meters can also be used to monitor your hydraulic clutch system flow if you choose, so you can look at that as well. They're available in three sizes, to work with your -8, or -12 lines. Why not take advantage of all the data you can get to help fast-track your journey to the winners circle! Order yours today!
Choose -8, or -12, in the "options" menu below.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Used Head Stud Nuts
How about a complete set of slightly Used Head Stud Nuts to help you stay within your racing budget this month for a change! This set of (26) total, are the 12 pt. style nuts that work with your 11/16" size socket. And fit your 9/16" fine thread size head studs. Add a can of peanut butter compound to your cart and you're all set for race day!
Hi-Performance Clutch Floaters
Nitrolink Racing Components is your one-stop shop for all your consumable needs! And when it's time to order Hi-Performance Clutch Floaters for the race weekend, then we're here to help with that as well. These brand new high quality floaters are precision machined and available in 10", 10.5", or 10.7" diameter, to work with your large or small size clutch stands. They can be ordered in 6, 8, or 9 stand configuration with your choice of various thickness and cutter groove options. Here's the perfect opportunity to improve your clutch program with one phone call... Order today!
Price: $79.95 each
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
Total
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
"Nitrolink" offers a complete line of all Dan Olson Race Products!
Dan Olson Top Fuel - A/Fuel Headers
Check out the photos on this brand new set of Dan Olson Top Fuel - A/Fuel Headers and then think of how awesome they would look on your Top Fuel or A/Fuel Dragster, Blown Altered, Tractor Puller, Drag Boat and so on... They can be ordered to fit any stage fuel heads or fat heads by Alan Johnson, BAE, Dart, etc. And are available in either 2 1/2", or 2 3/4" tube diameter with the standard degree bend. They can be set up with or without EGT bungs ready to accept your Racepak or similar Computer Probes if you're running them. And each set comes complete with lightened reinforcement tube gussets to complete this very nice package!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Hemi Inner Head Stud Nut Wrench
Here at GoNitrolink.com we're always happy to help with all you're specialty pit tool needs! And you won't find a brand new Hemi Inner Head Stud Nut Wrench like this one at your local hardware store, so grab one up right here quickly and easily! This quality tool is sure to make your job that much easier when it comes to accessing those 1/2" inner head stud nuts. It works with your 3/8" drive torque wrench to properly set those 12 point nuts to their correct torque spec. So, if you're trying to improve efficiency at the race track every time you go out, then this is one of those small details that could help make a difference! Order yours today!
Price
$175.00 – $177.00Price range: $175.00 through $177.00
Total
$175.00 – $177.00Price range: $175.00 through $177.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Oil Filters
Here's another quality built component that's perfect if your running the heavier 50, 60, or 70-wt. racing oils in your race car and have a limited amount of space to work with. Install one of these brand new System 1 Inline Oil Filters designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. It works with nitro, alcohol, or gas and can be ordered to work with either AN-10, or AN-12 size oil lines. And available in either red or black. Order one today... And it's on the way!
Choose your fitting size, fuel preference and color in the "options" menu below.
We offer a complete line of all Automan products!
Dual Magneto Handcuff Kit
Check out the quality and craftsmanship on this Dual Magneto Handcuff Kit for your MSD Pro Mag 44's. These are brand new and made of light weight billet aluminum and clamp securely to both magneto housings for a positive lock. The adjustable rods and heat treated rod ends offer yet one more safe-guard to keep both mags secure by working with your existing mag base clamps. There durable, light weight and easy to install. Ordering is simple... Just click, pay and they're on the way!
Race Engine Storage Bag Kit
Now you know exactly where to go to get em!!! This reusable Race Engine Storage Bag Kit is the perfect fit for the job. And can be difficult to find in their correct sizes when you need them. The Engine Bag is large enough to fit any (long block) race engine, including the headers and fits over most engine stands or dyno carts. And the Cylinder Head/Crankshaft Storage Bags are large enough to fit Hemi or Big Block Chevy Heads. These heavy duty, thick clear poly bags help keep those expensive racing parts free of dirt, metal shavings and other unwanted debris prior to, or after assembly. Ordering made easy, right here!
Kit includes: 1 Engine Storage Bag and 2 Cylinder Head/Crankshaft Bags.
Price
$177.95 – $214.95Price range: $177.95 through $214.95
Total
$177.95 – $214.95Price range: $177.95 through $214.95
Sleeve Hold Down Tubes
Check out this complete set of (4) Sleeve Hold Down Tubes that are available for either Fuel Heads, or Fatheads. This brand new set can be installed or removed quickly and fits right over your head studs to assure your sleeves stay in position while changing pistons. Add this handy tool set to your collection... Use them once and wonder how you ever managed without them! GoNitrolink.com for all your specialty pit tool needs!
Choose either Fuel Heads, or Fatheads in the "options" menu below.
Out of Hole Piston Checker Tool
This handy Out of Hole Piston Checker Tool is compact, light weight and will store away nicely in your race trailer or tool box until you're ready to put it to work! It allows you to get an accurate read on how high your Piston comes up for Piston/Valve clearance. And it comes complete with a dial indicator. Now you know exactly where to go for all your specialty pit tool needs! GoNitrolink.com
