426 Hemi Short Block Covers
So, if you're running an Alan Johnson, Brad, or Keith Black Block, then this next item should be right up your alley! Check out these 426 Hemi Short Block Covers that I'm sure every hemi racer out there can put to work immediately! Way to much time and money goes into tear-down, assembly, installation, etc; to even think about having dirt, metal shavings, hardware, or other foreign objects fall down inside your short block. These covers come in a 2 piece set and are made from .050 aluminum and powder coated black. They accept either 1/2" or 9/16" size head studs. And cover the whole top part of the short block as well as all cylinders. They clean up quickly, store away almost anywhere and can't wait to start protecting that spare short block in your race shop, trailer, or pit area!
Adjustable AN Fitting Line Wrench
Attention all Crew Chiefs... Before you tow up to the starting line, make sure you're fully prepared with an Adjustable AN Fitting Line Wrench just like this one. We've all seen it before... A Driver being told to shut off because of a loose fitting prior to a run. And more often than not, this style wrench might have made all the difference! Top quality craftsmanship second to none is offered right here with a finish and feel that make this handy pit tool the first one out of the tool box on race day. The anodized red finish makes it easy to spot. And it's thin light weight profile and handy end hook make it perfect for storing in your pocket or attaching it to your belt. It adjusts to a tight fit on any AN Fitting from -3 to -12 size. And is equipped with a handy Dzus Button Tool at the end of the handle that just eliminated having to carry yet another tool. So, you know how it works... Now that you've seen it... Guess what tool you'll wish you had the next time you go racing! Order yours today!
Priced to move at: Only $99.95
Price
$47.99 – $49.99Price range: $47.99 through $49.99
Total
$47.99 – $49.99Price range: $47.99 through $49.99
Adjustable Magnetic Dial Indicator Base
This next specialty tool is the perfect item for setting your camshaft, checking piston height, etc. This brand new Adjustable Magnetic Dial Indicator Base can work with most any type dial indicator (not included) and is basically like having an extra hand! The permanent magnetic base is equipped with an on-off switch that activates a super strong magnetic pull of 90 pounds. Once you activate the magnetic pull, this stand is NOT going to move! The base itself measures 2" x 2 1/2" x 2 1/4" total. And the vertical column measures 3/8" diameter x 7" high, with the adjustable arm measuring 7" long.
Choose Magnetic Base with or without fine adjustment in the "options" menu below.
Air Powered Valve Lapping Tools
The ultimate in Air Powered Valve Lapping Tools can be found right here with one of these brand new quality built time savers that can't wait to go to work for your race team!
This style operates on 90 PSI and is sure to streamline your operation in the cylinder head assembly department. It comes complete with 3 different cup sizes (7/8", 1-1/8" and 1-1/4") and 3 valve stem adapters. Replacement Cups are also available and sold separately. The road to the winners circle may be shorter than you think! GoNitrolink.com
Alan Johnson Stage 1 Nostalgia Cylinder Heads
Check out this "complete" set of Alan Johnson Stage 1 Nostalgia Cylinder Heads then you'll know one of the reasons why many of the top nostalgia nitro teams on tour are laying down those kind of numbers on race day! This set is the current style, popular because they utilize the smaller intake & exhaust runners making them perfect for use in Nostalgia Top Fuel, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is the single plug style, set up to run 4 spark plugs per head. Both are in excellent shape and work with your standard deck TFX Rodeck, BAE, or Keith Black cast or billet block, using your standard deck fuel head style manifold. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in nice shape. And they're loaded with a slightly used set of Victory 2.375 titanium intake and Manley 1.925 exhaust valves, with Victory locks & retainers. And a set of Manley Dual Intake and PAC Triple Valve Springs are also included as well. Plus, we'll include a complete set of inner head studs, intake manifold studs, header studs and valve cover studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running... So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is complete, available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $4500.00 set.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Alan Johnson Stage 5 Billet 426 Hemi Heads
Check out this nice set of Alan Johnson Stage 5 Billet 426 Hemi Heads perfect for use on your Top Fuel Dragster, Nitro Funny Car, Blown Altered, Drag Boat, Tractor Puller and so on. This slightly used set is in excellent shape and works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your standard deck fuel head style manifold. They're the .100 tall style and accept your 2.450 size intake and 1.925 exhaust valves, (not included). Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are already machined for o-rings and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These AJ Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Why Buy New??? So, if you've had a chance to shop around lately, then you know a brand new bare set identical to these will set you back almost $7000 Bucks! But don't even think about spending that much here... This set is available immediately and ready to ship out today. The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $2195.00
AN Fitting Cap & Plug Kit
This next item offered here on GoNitrolink.com has only one job to do and that is to help keep both your fuel and oil system clean and in the condition needed to assure maximum performance on the race track! This brand new plastic AN Fitting Cap & Plug Kit offers all the popular sizes needed to keep all your open lines and fittings covered to eliminate any dust, dirt, metal shavings, or debris from ruining your weekend. It also helps eliminate those annoying drips in your pit area, or on your trailer or race shop floor. This handy assortment includes both caps and plugs in -3, -4, -5, -6, -8, -10, -12 and -16 sizes. And it comes complete with a metal carrying case that stores away easily in your race trailer or race shop and keeps all sizes organized neatly. So, if you pay close attention to all the details when it comes to streamlining your racing operation, then this kit is definitely for you!
Another BRAND NEW item... Without the brand new price!!!
Arias 392 Hemi Coated Nitro Pistons
Great News!!! Here's another brand new product, without the brand new price tag! This set of (10) brand new Arias 392 Hemi Coated Nitro Pistons are the 4.125 bore size and ready to accept your 1.094" pin size, with a 1.600 compression height. Ring groove sizes are as follows:
Top = .0745", Second = .0641", Oil ring = .1880" size. We have several sets available, so click on "buy now" and get ready to save hundreds right here... Quality Racing Components + Unmatched Customer Service = GoNitrolink.com
Price: $695.00 per box.
Other Compression Heights Available. Call: (916) 425-1427 for details.
Price
$49.99 – $62.99Price range: $49.99 through $62.99
Total
$49.99 – $62.99Price range: $49.99 through $62.99
BAE / Keith Black Oil Pan Gaskets
GoNitrolink.com for all your hi performance gaskets and consumables! And if you're weapon of choice happens to be a BAE, or Keith Black block, then you know exactly how to put one of these brand new BAE / Keith Black Oil Pan Gaskets to work! These are made by Mahle and consist of a composite material, with a steel core and teflon coating to help prevent oil saturation. They're NHRA nitro legal, measure .087" thickness and are sold separately. We offer a large selection of all the popular hi performance racing gaskets including cylinder head, exhaust, oil pan, blower and injector gaskets to make sure we have you covered for the weekend!
Choose with cut-out's or no cut-out's in the "options" menu below.
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE 426 Hemi Billet Blocks
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
If it's time to start thinking about replacing your existing block with a brand new one. Or, you're ready to completely change your old combination by starting from scratch with the latest equipment, then do we have the set-up for you! These brand new Brad Anderson 426 Hemi Billet Blocks are custom made to meet your specifications. They come equipped with either standard, or 3" mains and can be ordered in any bore size, deck height, lifter size, or lifter spread, you choose. Check out the photos to see what a true finished product looks like, as close attention was paid to every detail! Call us anytime to discuss how we can help take your race team to the next level!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE 426 Hemi Fat Heads
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Having a good cylinder head program in place is one of the key components to having a successful race season! And if you're running on a small size, or substantial size budget, you still need to keep your competition in check! These brand new BAE 426 Hemi Fat Heads are state of the art and could be exactly what's needed to help keep your team on top of the performance curve. All BAE fat heads are precision machined, made of billet aluminum and ready to work with your BAE, TFX, or Keith Black aluminum blocks.
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE 426 Hemi Fuel Heads
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Weather you're working with a small or substantial size budget, having a good cylinder head program in place is one of the key components to having a successful race season! And if you're looking to stay on top of the performance curve, then check out these brand new, BAE 426 Hemi Fuel Heads to help keep your competition in check! All BAE fuel heads are precision machined, made of billet aluminum and can be ordered in either standard or .100 tall to work with your BAE, TFX, or Keith Black aluminum blocks. Feel free to call us anytime to discuss getting a brand new set started just for you!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
