Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 3/8"-24 Fine Thread - Pack of 10
These Jet Nuts - 3/8"-24 Fine Thread - Pack of 10 - are coated steel to fit your 7/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
Price
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Total
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Co2 Air Bottle
If you're limited on space, or just like the sleek look of this small size Co2 Air Bottle then lets continue! This one's slightly used, made of light weight aluminum and anodized black for that cool stealth look. It measures 2" in diameter, by 16" long and weighs in at 2 pounds empty. It can be used with a number of different applications to include air shift Lenco's or B&J transmissions, air timers, air shut-off switches, etc. Another "Nitrolink" super saver item to help racers on a budget keep doing what they do best!
Price
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Total
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Another BRAND NEW item... Without the brand new price!!!
Carbon Fiber Heel Cup
G-Force + Carbon Fiber = this next "Nitrolink" item that's sure to not only help fine tune your driving skills on race day. But also make your race car look that much cooler inside!!! This awesome looking Carbon Fiber Heel Cup is brand new and performs as well as it looks! It's made by McKinney Corp and the perfect item if your having a little difficulty at the starting line after you launch the car with your foot trying to move away from the throttle (not good!). It's very light weight, easy to install and provide that awesome look that only carbon fiber has to offer! Now you know exactly where to go for all the really cool racing parts! GoNitrolink.com
We offer a complete line of all Automan products!
Dual Magneto Handcuff Kit
Check out the quality and craftsmanship on this Dual Magneto Handcuff Kit for your MSD Pro Mag 44's. These are brand new and made of light weight billet aluminum and clamp securely to both magneto housings for a positive lock. The adjustable rods and heat treated rod ends offer yet one more safe-guard to keep both mags secure by working with your existing mag base clamps. There durable, light weight and easy to install. Ordering is simple... Just click, pay and they're on the way!
Slightly Used
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
MSD Pro Mag 44 Coils - Slightly Used
This next "Nitrolink" budget friendly item is sure to save you several hundred bucks by not having to buy new!!! We have quite a few of these MSD Pro Mag 44 Coils - Slightly Used (Part #8142) in stock and ready to ship. These current style coils were in service for a short time, and still have a lot of laps left in em! And the great news is they all have been thoroughly load bank and meter tested by MSD and have not been on a car since. All numbers etc; look good to go and all are in very clean condition, free of any damage and sold separately. No weak used up parts sold here!
Fram HP6 Spin-On Oil Filters
Great news!!! If you're running a remote oil filter set-up on your race car. And like to save a few bucks at the same time, then this next item is just for you... These brand new hi performance Fram HP6 Spin-On Oil Filters are the popular size, commonly used with your remote oil filter adapter on a variety of applications. Some of the Top Fuel Dragsters, Nitro Funny Cars, Blown Alcohol Cars, etc; choose to run a remote set-up, along with this exact size Oil Filter for quick, easy access in between rounds. And if that's how you roll, then you're in luck right here! And if you've had a chance to shop around lately, then be prepared to spend as much as $32 bucks each, or more for this exact size Oil Filter. But why even consider that when you can pick them up right here at a fraction of the cost!!!
Price
$25.00 – $150.00Price range: $25.00 through $150.00
Total
$25.00 – $150.00Price range: $25.00 through $150.00
Burst Panels - Standard
Blower back-fire is always a let down on race day... However, if it does happen we're happy to loose one of these instead of something more expensive, right! So, let's offer a quick easy way to order any amount of these brand new Burst Panels - Standard size to keep your race car off the trailer and on the track going rounds... These are the 24 bolt, 6 1/4" x 3 1/4" standard size panels that are SFI 23.1 tagged and ready to install. Order 1, 5, or 10, because at this price you can't go wrong!
Price
$25.00 – $190.00Price range: $25.00 through $190.00
Total
$25.00 – $190.00Price range: $25.00 through $190.00
Burst Panels - Small
Blower back-fire is always a let down on race day... However, if it does happen we're happy to loose one of these instead of something more expensive, right! So, lets offer a quick easy way to order any amount of these Burst Panels - Small size to keep your race car off the trailer and on the track going rounds... These are the 18, bolt 4 1/4" x 2 3/8" small size panels that are SFI 23.1 tagged and ready to install. Order 1, 5, or 10, because at this price, you can't go wrong!
Price
$41.95 – $43.95Price range: $41.95 through $43.95
Total
$41.95 – $43.95Price range: $41.95 through $43.95
We offer a complete line of all Automan products!
Billet Burnout Stops
It's sleek, it's profiled, it's just plain awesome! These super trick Billet Burnout Stops are a team owners best friend when it comes to keeping engine RPM at a safe level during the burnout. Installs instantly on your throttle cable by the injector throttle stop. After the back up, simply pull the ring attached to the stainless safety pin clip to remove it, then bring your driver up to the beams! They're made of billet aluminum, polished and anodized for a bright brilliant shine, to stand out so you don't forget to take them off. And they're available in 2 throttle cable sizes, 10/32" or 1/4" inch. Length may need to be adjusted if needed. Instruction sheet included... Top quality products = a top quality race team! GoNitrolink.com
Race Engine Storage Bag Kit
Now you know exactly where to go to get em!!! This reusable Race Engine Storage Bag Kit is the perfect fit for the job. And can be difficult to find in their correct sizes when you need them. The Engine Bag is large enough to fit any (long block) race engine, including the headers and fits over most engine stands or dyno carts. And the Cylinder Head/Crankshaft Storage Bags are large enough to fit Hemi or Big Block Chevy Heads. These heavy duty, thick clear poly bags help keep those expensive racing parts free of dirt, metal shavings and other unwanted debris prior to, or after assembly. Ordering made easy, right here!
Kit includes: 1 Engine Storage Bag and 2 Cylinder Head/Crankshaft Bags.
B&M "Pro Bandit" Gated Automatic Race Shifter
This next high quality component is offered to all racers out there running a Rear Engine Dragster equipped with a Powerglide! This B&M "Pro Bandit" Gated Automatic Race Shifter is definitely one of the nicest looking Shifters on the market with it's sleek design, CNC machined construction and race proven performance. It comes set up for a 2 speed powerglide transmission, however can also be converted to work with your 3, or 4, speed automatic transmission by simply replacing the hardened steel gate plate, applicable bracket and lever (sold separately) and it's forward and reverse shift pattern compatible. It measures 10"L x 1.3"W x 9.3"H and the compact lightweight design, mandatory reverse lock-out and rear cable exit check all the boxes for all our Rear Engine Dragster customers out there looking for a quality product, second to none! Please call: (916) 425-1427 with any questions, as we're here to help anytime!
Shifter cable, floor mounting brackets and hardware are all sold separately.
