Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10
These Titanium NAS Screws -1/4"-28 Fine Thread - Pack of 10 - are 11/16" long, partially threaded, countersunk, with a phillips head. And can be used in a wide variety of racing applications. They offer a lighter weight alternative compared to standard steel hardware for the weight conscience racer. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 3/8"-24 Fine Thread - Pack of 10
These Jet Nuts - 3/8"-24 Fine Thread - Pack of 10 - are coated steel to fit your 7/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Price
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Total
$195.00 Original price was: $195.00.$149.95Current price is: $149.95.
Another BRAND NEW item... Without the brand new price!!!
Starter Dog - Fits PSI
Attention all racers out there running a PSI Screw Blower. This brand new small style Starter Dog - Fits PSI Superchargers only and is the exact item needed to help insure there are no unexpected problems at the line when it comes to firing your race car! Keeping your Starter Jaw in good shape not only helps extend the life of your Blower Starter, as a worn out Starter Dog quickly transfers to other key components on your Starter requiring extra down time, extra maintenance and extra expense. This one works specifically with the PSI mini snout using the smaller style pulleys and is equipped with the 1/2" drive for your turn-over bar for adjusting the clutch, finding TDC, adjusting the valves, etc. It's strong durable and made of heat treated billet steel and ready to go to work!
Price
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Total
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Another BRAND NEW item... Without the brand new price!!!
Carbon Fiber Heel Cup
G-Force + Carbon Fiber = this next "Nitrolink" item that's sure to not only help fine tune your driving skills on race day. But also make your race car look that much cooler inside!!! This awesome looking Carbon Fiber Heel Cup is brand new and performs as well as it looks! It's made by McKinney Corp and the perfect item if your having a little difficulty at the starting line after you launch the car with your foot trying to move away from the throttle (not good!). It's very light weight, easy to install and provide that awesome look that only carbon fiber has to offer! Now you know exactly where to go for all the really cool racing parts! GoNitrolink.com
Price
$25.00 – $150.00Price range: $25.00 through $150.00
Total
$25.00 – $150.00Price range: $25.00 through $150.00
Burst Panels - Standard
Blower back-fire is always a let down on race day... However, if it does happen we're happy to loose one of these instead of something more expensive, right! So, let's offer a quick easy way to order any amount of these brand new Burst Panels - Standard size to keep your race car off the trailer and on the track going rounds... These are the 24 bolt, 6 1/4" x 3 1/4" standard size panels that are SFI 23.1 tagged and ready to install. Order 1, 5, or 10, because at this price you can't go wrong!
B&M "Pro Bandit" Gated Automatic Race Shifter
This next high quality component is offered to all racers out there running a Rear Engine Dragster equipped with a Powerglide! This B&M "Pro Bandit" Gated Automatic Race Shifter is definitely one of the nicest looking Shifters on the market with it's sleek design, CNC machined construction and race proven performance. It comes set up for a 2 speed powerglide transmission, however can also be converted to work with your 3, or 4, speed automatic transmission by simply replacing the hardened steel gate plate, applicable bracket and lever (sold separately) and it's forward and reverse shift pattern compatible. It measures 10"L x 1.3"W x 9.3"H and the compact lightweight design, mandatory reverse lock-out and rear cable exit check all the boxes for all our Rear Engine Dragster customers out there looking for a quality product, second to none! Please call: (916) 425-1427 with any questions, as we're here to help anytime!
Shifter cable, floor mounting brackets and hardware are all sold separately.
Price
$26.57 – $28.97Price range: $26.57 through $28.97
Total
$26.57 – $28.97Price range: $26.57 through $28.97
Blower Base Gasket - Fits 6-71 or 8-71
Attention in the pits!!! If you're running a 6-71 or 8-71 supercharger on your race car, then "Nitrolink" is here to help by offering this style Blower Base Gasket - Fits 6-71 or 8-71 to work with your application. These are made from the highest quality materials and precision-cut for an excellent seal and fit. And they're available in either 1/32" or 1/16" thickness size. So, if you need one... Here they are! If you have one, then don't forget your spare!
Sold individually. Choose thickness size in "options" menu below.
Price
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Total
$239.00 Original price was: $239.00.$214.95Current price is: $214.95.
Compact Pit Area / Race Trailer Air Mover Fan
900 CFM High Volume Air Flow out of a 1/4 horsepower motor that's compact and uses only 2 amps when running!!! I think you know exactly how to put this Compact Pit Area / Race Trailer Air Mover Fan to work!!! The advanced blade design inside produces a high airflow, while running quietly and efficiently. It's unique shape allows for multiple angle adjustments to direct air flow directly where it's needed. It's low profile design is perfect in between rounds for cooling down race engines, transmissions, race trailers, pit areas, etc. Or, it works equally as well for cooling & ventilation at the race shop. It's equipped with an extra 12 amp power outlet to run a drop light, electric power tool, phone charger, or another fan. And the 15' long cord and built in carry handle make for a very nice package. Overall dimensions are 19.5" long x 17.5" wide x 8.6" tall, plus it weighs only 16.5 lbs. Order right here today... Your crew will be happy you did!
Dzus Fastener Tool
Now here's a top quality Dzus Fastener Tool you'll be happy to reach for to help keep that new paint or wrap job on your race car free of damage or scratches! This quarter turn fastener tool is equipped with a rubber grip handle for a comfortable fit. It works well with all brands of fasteners, has a curved blade that helps prevent fastener damage and measures 6 1/4" total length. So give your screw drivers and fasteners a break... Order the correct tool for the job today!
Double End AN Wrench Set - 7 Piece
"Nitrolink" also offers this style Double End AN Wrench Set - 7 Piece for a hassle-free environment at your race shop the next time you decide to assemble hose ends, or check all the lines on your race car. This 7 piece set, (3 AN to 20 AN) is made of 6061-T6 billet aluminum. The contoured edges make them comfortable to use. And the shorter design length helps to prevent over-tightening your hose ends. All wrenches are anodized, color coded and numbered for quick easy identification. And the perfect addition to any pit tool box!
Price
$30.95 Original price was: $30.95.$21.95Current price is: $21.95.
Total
$30.95 Original price was: $30.95.$21.95Current price is: $21.95.
Aluminum Vise Jaws
The job of building new hose lengths for your race car just became a whole lot easier! Using a set of Aluminum Vise Jaws to hold everything in place while your working can make all the difference. This set is magnetic so they work with most style bench vises, measure 4" long and help protect hose ends during assembly. And could even prevent scratches if used carefully. Another small item that could help when you're organizing!
Color may vary.
Pro Cam Degree Wheel
Possibly the nicest one on the market, this Pro Cam Degree Wheel is quality made and ready to provide years of service to your racing operation. It's durable, made of sturdy aluminum, measures 11" in diameter and equipped with a color-coded scale for instant read-outs. Grab your cam card and dial in the desired spec for a precise degreed accurate setting. The exhaust and intake centerline areas are also indicated and color-coded. Add one to you're cart, pay easily and we'll handle the rest!
