Price
$99.95 – $119.95Price range: $99.95 through $119.95
Total
$99.95 – $119.95Price range: $99.95 through $119.95
Clutch Pack Line-Up Tool
Lightweight aluminum and ready to be pressed into service, this Clutch Pack Line-Up Tool is machined to the highest quality and anodized black for quick easy clean up. And designed to fit like a glove when it comes to lining up all your clutch disks to accept your input shaft or transmission. They can be ordered in 3 sizes, 1 3/8", 1 3/4", or 1 7/8" 10 spline, to work with either the large or small size pilot bearing. One more quality race tool to match your quality race team!
426 Hemi Short Block Covers
So, if you're running an Alan Johnson, Brad, or Keith Black Block, then this next item should be right up your alley! Check out these 426 Hemi Short Block Covers that I'm sure every hemi racer out there can put to work immediately! Way to much time and money goes into tear-down, assembly, installation, etc; to even think about having dirt, metal shavings, hardware, or other foreign objects fall down inside your short block. These covers come in a 2 piece set and are made from .050 aluminum and powder coated black. They accept either 1/2" or 9/16" size head studs. And cover the whole top part of the short block as well as all cylinders. They clean up quickly, store away almost anywhere and can't wait to start protecting that spare short block in your race shop, trailer, or pit area!
Piston/Rod Rack
No need to set those expensive Pistons & Rods on the work bench any longer! Why risk picking up dirt, metal shavings, etc; before they're installed? This Piston/Rod Rack is definitely the answer!!! Perfect for holding your complete set of Pistons & Rods safely while you service them. When you're finished, carry the whole set out, rack and all to your race car for installation. And it's equipped with a handy bottom drip tray for easy clean up. Now you can transport complete spare sets to a from the race track easily. GoNitrolink.com for all your specialty pit tool needs!
Piston Ring Compressors
Easy installation with precision accuracy is what you'll find right here with these Piston Ring Compressors that are sold separately and offered in all the popular sizes to make sure you're covered on race day! This high quality tool is anodized black and made from aircraft quality 6061T6 heat-treated aluminum and then hard anodized for a long life. All ring compressors are machined with a step at the bottom to clear block o-rings when used. And are a must have for getting the job done quickly and efficiently... Specialty pit tools 24/7 right here! GoNitrolink.com
Choose bore size needed in the "options" menu below.
Kevlar Hot Sleeve Arm Covers
Show your bottom end crew member you appreciate their efforts in between rounds with these handy Kevlar Hot Sleeve Arm Covers to help protect their arms while working around a hot engine. They come in black, are sold separately and made of durable, heat-resistant Kevlar® and work on either the right or left arm. They're one size fits all and machine washable so they'll be fresh and ready to go for each event. And can be ordered as a pair if you choose... Racers helping Racers do what they do best! GoNitrolink.com
Price
$145.60 – $151.00Price range: $145.60 through $151.00
Total
$145.60 – $151.00Price range: $145.60 through $151.00
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Silver Rocker Stands
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
Choose your style... Red, Blue, Silver, or Black! Because if you're a valued "Nitrolink" customer, we'll make sure to offer you all the choices! These brand new BAE Silver Rocker Stands are the hi ratio style, made of billet aluminum and work with your BAE 4's, 5's, or 6 fat heads or Alan Johnson muscle heads. And the great news is they can be purchased separately, or as a set. They come in 2 variations, oiler style or end stand style and come equipped with steel rocker stud inserts for a secure fit. Ordering right here on our website really is as easy as 1,2,3!!!
Choose oiler style or end stand style in the "options" menu below.
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Oil Pan Nuts
If you're running a AJ, Brad, or Keith Black block and are looking for a great deal on a complete set of brand new Hemi Oil Pan Nuts then look no further! These sets are made of durable steel, zinc coated and can be ordered in either the 5/16" -24 fine thread size, or the 5/16" -18 coarse thread size. And both come with a serrated flange for a secure fit. This popular item comes in a package of (24) total, so it's enough to work on either BAE or TFX blocks with any brand of 426 hemi oil pan on the market. And should be replaced with a fresh set every so often for optimum performance. Now you know exactly where to go for all your specialty hardware!
Choose either fine thread, or coarse thread in the "options" menu below.
426 Hemi Rear Main Seal Kit
If you're thinking about freshening up your primary engine in your race car, or spare engine in your race trailer then don't forget a 426 Hemi Rear Main Seal Kit to get the job done right! This set is exactly what's needed if your running a TFX, Brad, or Keith Black block. And it could prevent a whole lot of problems by your team not being shut off on the starting line because of an oil leak. A few clicks of your mouse and it's on the way!
Hi-Performance Clutch Disks
And if you're looking to streamline your clutch program when it's time to order
Hi Performance Clutch Disks without the hassle, then one call does it all! These brand new high quality disks are precision manufactured by Boninfante and available in 10", 10.5", or 10.7" diameter. And can be ordered in 1 3/8", 1 3/4", 1 7/8, (10 spline). And if you need floaters to go with em, just scroll down this page and you're there... You just found the coolest place on the planet for high end racing components! GoNitrolink.com
Price: $219.95 each
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Piston / Rod Rack
It's strong, it's durable and it's ready to offer your race team, trailer, or race shop that professional look it deserves! This high quality Piston/Rod Rack is brand new and perfect for holding your complete set of pistons & rods while you service them. When you're finished, carry the whole set out, rack and all to your race car for installation. It measures 22 1/2" long by 11" wide by 8 1/2" tall. The top is equipped with a vinyl coating to prevent piston damage. And it also has an easy to clean drip tray on the bottom. Pretty cool!!! And works great for storing complete sets in your trailer during transport. Don't lay those expensive pistons & rods on the work bench or elsewhere and risk picking up dirt, metal shavings, etc; before they're installed. You're only a few clicks away, to get one on the way!
Price
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Total
$69.95 Original price was: $69.95.$49.95Current price is: $49.95.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Co2 Air Bottle
If you're limited on space, or just like the sleek look of this small size Co2 Air Bottle then lets continue! This one's slightly used, made of light weight aluminum and anodized black for that cool stealth look. It measures 2" in diameter, by 16" long and weighs in at 2 pounds empty. It can be used with a number of different applications to include air shift Lenco's or B&J transmissions, air timers, air shut-off switches, etc. Another "Nitrolink" super saver item to help racers on a budget keep doing what they do best!
Price
$25.00 – $190.00Price range: $25.00 through $190.00
Total
$25.00 – $190.00Price range: $25.00 through $190.00
Burst Panels - Small
Blower back-fire is always a let down on race day... However, if it does happen we're happy to loose one of these instead of something more expensive, right! So, lets offer a quick easy way to order any amount of these Burst Panels - Small size to keep your race car off the trailer and on the track going rounds... These are the 18, bolt 4 1/4" x 2 3/8" small size panels that are SFI 23.1 tagged and ready to install. Order 1, 5, or 10, because at this price, you can't go wrong!
