Billet Dual Feeler Gauge Handle
At "Nitrolink" it's all about choices! So, here's one more Billet Dual Feeler Gauge Handle
if you prefer using the longer style that holds 2 separate gauges on the opposite ends of the handle. They're strong, durable, made of billet aluminum and ready to assist your top end technician when it's time to quickly run thru a set of valves. They measure 5" x 1" x .5" total and can accept various sizes of 1/2" wide feeler gauges depending on your application. And can be stacked 3-4 gauges high if you choose... Specialty pit tools 24/7 right here! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Sold separately, Gauges not included.
Billet Primer Nozzle & Bottle
Now you know exactly where to go to get your Billet Primer Nozzle & Bottle INCLUDING the Correct Bottles. Identical to what many of the pro nitro teams on tour are using! These nozzles are made of 6061 billet aluminum and designed to deliver the exact amount of fuel needed into the injector prior to start-up. And the bottles included are the perfect size to handle on the starting line. Or, the nozzles alone could work with several different styles of bottles out there if you prefer to use your own. So, if you pay close attention to even the small details, then here's the perfect item to give your race team that professional look it deserves! GoNitrolink.com
(Empty Bottle when not in use.)
Billet Remote Starter Button
Supplying your race team with all the right equipment to make sure you're prepared on race day is what we do best! So, check out this brand new Billet Remote Starter Button that allows you to crank over your motor from the engine compartment to help streamline the process when it comes to checking compression, doing a leak-down, setting valves, or turning over your engine to get oil pressure. It's quickly connected to your starter motor or solenoid prior to use, then easily removed when your done... Specialty Pit Tools taken to the next level! GoNitrolink.com
WARNING: Fully disconnect any coil wire(s) prior to use to help avoid accidental start up's in gear!!!
Billet Spark Plug Gap Tool
This light weight anodized Billet Spark Plug Gap Tool is the perfect item to outfit your race team with right before you hit the road! This handy high quality tool is a must if you're looking to save time at the race track. Comes complete with a side strap to open plug gap if needed. And allows you to breeze thru setting gap on a large or small amount of plugs in no time! Helping your team organize for the race weekend is what we do best! GoNitrolink.com
Blower Base Gaskets
Let GoNitrolink.com save you both time and money on all your consumables as well... And we'll keep offering products like these Blower Base Gaskets to help keep your race team budget in check! These are the upgraded nitrile style for better performance and longevity. And the standard size that could work with most any 6-71 to 14-71 roots style supercharger. They feature a .032" thickness, with a 4" x 12 1/4" center opening without the center tab. And they work with your standard 7/16" size blower studs. This is one of those items that definitely needs to be put in the race trailer before the race weekend... Remember, don't forget your spares!
Sold separately.
Blower Starter Switches
Paying close attention to all the details is key to a successful race weekend! And now, you know exactly where to go to order your spare Blower Starter Switches just like this one! These high quality momentary toggle switches are quick and easy to replace. And one of those small items that would be almost impossible to replace at the race track, if needed. They're sold separately and at this price, you can keep a couple in the race trailer to assure that you're fully prepared... Save, Race, Win, Repeat! GoNitrolink.com
Blower Stud Kits
The new racing season is in full swing! Making this the perfect opportunity to get a jump on this money saving offer... We have a limited supply of BRAND NEW Blower Stud Kits that are ready to ship out immediately. And check out the craftsmanship on this set... Awesome! Mandatory in both NHRA & IHRA competition, this set of (8) total could work with any roots style supercharger. And can be used on either regular or set-back style manifolds. They're machined from high quality aluminum, anodized black and equipped with a hex top for easy installation or removal. They measure 2.585" over all length, with a 7/16" size, #20 thread on top. And a 1/2" size, #13 thread going into the Manifold. Nuts sold separately. Supplies are limited so, if you need a set... Here they are! If you have a set... Then here's your spares!!!
Price
$25.00 – $190.00Price range: $25.00 through $190.00
Total
$25.00 – $190.00Price range: $25.00 through $190.00
Burst Panels - Small
Blower back-fire is always a let down on race day... However, if it does happen we're happy to loose one of these instead of something more expensive, right! So, lets offer a quick easy way to order any amount of these Burst Panels - Small size to keep your race car off the trailer and on the track going rounds... These are the 18, bolt 4 1/4" x 2 3/8" small size panels that are SFI 23.1 tagged and ready to install. Order 1, 5, or 10, because at this price, you can't go wrong!
Price
$25.00 – $150.00Price range: $25.00 through $150.00
Total
$25.00 – $150.00Price range: $25.00 through $150.00
Burst Panels - Standard
Blower back-fire is always a let down on race day... However, if it does happen we're happy to loose one of these instead of something more expensive, right! So, let's offer a quick easy way to order any amount of these brand new Burst Panels - Standard size to keep your race car off the trailer and on the track going rounds... These are the 24 bolt, 6 1/4" x 3 1/4" standard size panels that are SFI 23.1 tagged and ready to install. Order 1, 5, or 10, because at this price you can't go wrong!
Camshaft Checker Tool
So, how about we streamline your race team a little more with a slightly used Camshaft Checker Tool that's ready to be pressed into service right out of the box! This one works with your 426 Hemi equipped with a .904 lifter bore size only. It's made of light weight aluminum and comes with an easy to read gauge that helps you degree your camshaft by displaying your cam lift. Plus, it's compact size makes it easy to store away nicely in your race trailer or race shop when not in use... Specialty Pit Tools 24/7 right here! GoNitrolink.com
Carbon Fiber Engine Containment Diaper
State of the art nitro & alcohol racing components are what we do best! And when it comes to one of the nicest buckets on the market, check out this brand new Carbon Fiber Engine Containment Diaper that's ready to offer a quicker, cleaner option than the standard fabric style diaper during removal & installation in between rounds. It's light weight and can be ordered to work with either the TFX or BAE/KB 426 Hemi aluminum blocks. And this one, unlike the other carbon fiber bucket on the market comes outfitted with light weight titanium side plates to help offer extra added protection in the event of connecting rod failure. Also included is a set of 4 upgraded kevlar mounting straps that can be ordered with your choice of either the header mount style (pictured) or chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags. And a set of 2 side absorbent pads are also included as well. Please specify your brand of oil pump, wet or dry sump and pan measurements when ordering... The coolest place on the planet for Carbon Fiber Drag Racing Components! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Total
$98.95 Original price was: $98.95.$69.95Current price is: $69.95.
Another BRAND NEW item... Without the brand new price!!!
Carbon Fiber Heel Cup
G-Force + Carbon Fiber = this next "Nitrolink" item that's sure to not only help fine tune your driving skills on race day. But also make your race car look that much cooler inside!!! This awesome looking Carbon Fiber Heel Cup is brand new and performs as well as it looks! It's made by McKinney Corp and the perfect item if your having a little difficulty at the starting line after you launch the car with your foot trying to move away from the throttle (not good!). It's very light weight, easy to install and provide that awesome look that only carbon fiber has to offer! Now you know exactly where to go for all the really cool racing parts! GoNitrolink.com
