Complete 426 Hemi Rocker Assembly
So, if you're running a Nostalgia Nitro Funny Car or Top Fuel Dragster, AA/Fuel Altered, Doorslammer, Drag Boat, or Tractor Puller on Nitro, Alcohol, or Gas, then check out this brand new Complete 426 Hemi Rocker Assembly that's definitely some of the best equipment money can buy for strength, durability and performance.
This standard ratio set, loaded with brand new billet stands can be ordered to works with either 9/16" or 1/2" head studs. Both new intake and exhaust rockers are made by Manton and are the upgraded billet pressure fed oiler style and one of the strongest on the market. Intakes are the popular 1.7 ratio, with the exhaust offering the standard 1.65 ratio. All rockers are equipped with the larger 7/16" adjusters with the 3/8 ball, however can be ordered with a smaller ball size to match your existing pushrod cup size if you choose. The new Manton steel shafts have a .250 wall thickness and the new adjusters, nuts, shims, hardware and springs are included as well. This set-up works with your BAE, Dart, or Alan Johnson fuel heads that bolt up to your TFX, BAE, or Keith Black cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc.) these will not adapt to your application. This set-up is complete out of the box and ready to bolt on and go racing...
Top of the line racing components + Unmatched customer service = GoNitrolink.com
Price
$291.43 – $410.41Price range: $291.43 through $410.41
Total
$291.43 – $410.41Price range: $291.43 through $410.41
Complete Fuel Hydrometer Kit
Over the years, we have found premium alternatives to every component and had them assembled all together right here to offer this brand new Complete Fuel Hydrometer Kit for all our valued customers! Other brands just don't deliver when it comes to durability, accuracy and clear readability. So, this kit includes a large diameter beaker that's perfect for pouring fuel in an out of and is less prone to tipping over. The durable stainless steel dial thermometer included is equipped with a fuel-proof bezel and replaces the fragile "old school" mercury glass thermometer. The Hydrometers are finely graduated and deliver a clear, accurate nitromethane reading from 0% to 100% if you choose, (with the 4 hydrometer kit). If the full range is not required, then no problem... Just choose the smaller size kit with the range you need and you're all set! All kits include a large fuel-proof polyethylene padded custom die-cut foam case, along with a nitro chart and instructions. Here at "Nitrolink" we sell you just what you need and not what you don't!
Choose the number of Hydrometers needed & range(s) in the "options" menus below.
(0%, Gas & Methanol) (2% - 35%, Nitro) (32% - 60%, Nitro) (60% - 100%, Nitro)
Connecting Rod Checker - Hemi
This Connecting Rod Checker - Hemi style allows you to monitor your connecting rod lengths so you know when it's time to re-size or replace them with a fresh set before it's to late! Don't risk the possibility of catastrophic engine failure by running your rods to long. This one's brand new and comes complete with a dial indicator included. And small enough to stow away nicely in your trailer or race shop. Pair this item up with one of our Rod Bolt Checker Tools to help make your preventative maintenance program that much better! When it comes to specialty pit tools... "Nitrolink" has you covered!
Rod in photo is for display only.
Another BRAND NEW item... Without the brand new price!!!
CP 426 Hemi Coated Nitro Pistons
How about another brand new product, without the brand new price tag! This set of (10) brand new CP 426 Hemi Coated Nitro Pistons are the 4.187 bore size and ready to accept your 1.156" pin size, with a 1.715 compression height. Ring groove sizes are as follows:
Top = .0745, Second = 1/16", Oil ring = 3/16" size. We only have one set available, so click on "buy now" because just like on the starting line, reaction time helps win the race! GoNitrolink.com
Another BRAND NEW item... Without the brand new price!!!
CP Carrillo 426 Hemi Coated Nitro Pistons
Lets showcase another brand new product, without the brand new price tag! This set of (10) brand new CP Carrillo 426 Hemi Coated Nitro Pistons are the 4.187 bore size and ready to accept your 1.156" pin size, with a 1.620 compression height. Ring groove sizes are as follows:
Top = 1/16", Second = 1/16", Oil ring = 3/16" size. We have several sets available, so click on "buy now" and get ready to save hundreds right here... Save, Race, Win, Repeat! GoNitrolink.com
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
We all know the importance of having a good clutch program in place and how setting your race car up with the correct components right from the start can save you countless hours in the pits, multiple runs on the track and a whole lot of frustration. And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Funny Car, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape. And in fact, has only 1 burnout on it since it was inspected. This one's the 10.7 size, equipped with the lighter weight aluminum pressure plate, flywheel and upgraded titanium donut. It's set up to run 3 disks (not included) and is the 6 stand model with the popular big stands and titanium adjusters. This set-up was recently certed, and is ready for showtime!!!
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch... Then be prepared to spend right at $5,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for half the cost of new, making this the perfect opportunity to save thousands!!!
Available immediately and priced to move.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape and has not been run since it's last inspection. This one's the 10" size, equipped with the lighter weight aluminum pressure plate, flywheel and donut. It's set up to run 2 disks (not included) and is the 6 stand model with 1/2" studs, with all adjusters included made of titanium.
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch. Then be prepared to spend right at $3,500 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for way less than the cost of new so don't delay, order today!
Priced to move at: Only $1695.00
Cylinder Head Intake Runner O-Rings
GoNitrolink.com for all your consumables! And we'll help save you both time and money by offering products like this brand new set of (8) total Cylinder Head Intake Runner O-Rings to help keep everything sealed up so you're ready for the next round! And we'll make it super simple to order everything right here. Just a couple clicks and it's done!
Price
$147.99 – $163.99Price range: $147.99 through $163.99
Total
$147.99 – $163.99Price range: $147.99 through $163.99
Cylinder Sleeve Flex-Hone Tools
"Nitrolink" carries the popular bore sizes needed, so one of these Cylinder Sleeve Flex-Hone Tools can help make that job a little easier to deal with. They offer a quick, consistent "clean up" by removing peaks and imperfections on your cylinder walls for better performance! They're self-centering and self-aligning to the bore with each of the abrasive pads having independent suspension, allowing them to compensate accordingly to correct wear areas for a superior even surface finish. When ordering please use your actual cylinder inside diameter, as all Flex-Hones are produced over-sized and will adjust to work with your size sleeve.
Please specify bore size needed in the "options" menu below.
Price
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
Total
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
"Nitrolink" offers a complete line of all Dan Olson Race Products!
Dan Olson Top Fuel - A/Fuel Headers
Check out the photos on this brand new set of Dan Olson Top Fuel - A/Fuel Headers and then think of how awesome they would look on your Top Fuel or A/Fuel Dragster, Blown Altered, Tractor Puller, Drag Boat and so on... They can be ordered to fit any stage fuel heads or fat heads by Alan Johnson, BAE, Dart, etc. And are available in either 2 1/2", or 2 3/4" tube diameter with the standard degree bend. They can be set up with or without EGT bungs ready to accept your Racepak or similar Computer Probes if you're running them. And each set comes complete with lightened reinforcement tube gussets to complete this very nice package!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Another BRAND NEW item... Without the brand new price!!!
Darton 4.187 Sleeves
And if you're running a TFX Hemi Billet Block with an .040 over-sized sleeve register, then lets get you set up with these brand new Darton 4.187 Sleeves that are being sold separately... And at a money saving price to help your racing budget go that much further! We have quite a few of these in stock right here, so click, pay and they're on the way! GoNitrolink.com
Other Sleeve Sizes available. Please call: (916) 425-1427 for more details.
Deluxe Digital Leak Down Testers
If you're looking for a top quality tool with precision accuracy then consider one of these brand new Deluxe Digital Leak Down Testers to add to your racing operation! Loaded with all the extras you would expect in a top of the line tool, this model provides easy-to-read digital numbers that read within 1/2 of 1% percent accuracy making it much more accurate than traditional testers. It's the best way to check for bent or leaking valves, bad ring seal, or even leaking head gaskets. Both gauges feature rubber bumpers for extra added protection and are back lit for easy legibility and equipped with low battery indicators. Outfitted with a control inlet valve to avoid shock to the gauges when air is turned on, to help provide a more accurate reading, easier use and longer gauge life. It comes complete with either a 12mm, or 14mm spark plug connector and hose. And includes it's own protective storage case for a very nice package deal. Now you know exactly where to go for all the cool higher end racing components... Nitrolink!
Choose either 12mm, or 14mm spark plug size in the options menu below.
