Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used BBC Counter Weight Crank Hub
The next Big Block Chevy item would be this slightly Used BBC Counter Weight Crank Hub that was made by RCD. It's in great shape with very little track time and used in conjunction with your blower pulley and degree wheel. It's made of hardened steel, anodized black and equipped with a dual keyway. Install this one today and go give those hemi's a run for their money!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Hadman Front Motor Plate
If you're ordering parts to put a car together then here's a good place to start! This slightly Used Hadman Front Motor Plate is made of 1/4" thick aluminum. It measures 20 1/4" across center to center between notches and works with your 1 1/4" pipe size. We're always happy to help you take your first steps toward the winners circle!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Pac 1360 Valve Springs
Lets offer a nice set of Used Pac 1360 Valve Springs for all our valued customers on a tight budget. This set of (16) total steel double springs measures 1 1/2" O.D. and have an installed height of 400 lbs. @ 2.250 and a coil bind of 1.190 total. All were recently tested with good numbers and perfect for having in your race trailer as a spare set. At this price, you can afford to be prepared on race day!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Now here's another quality racing component that won't empty your bank account nearly as quick as buying new! This slightly Used Waterman Wet Sump Oil Pump is your standard gear style, equipped with an outside oil pressure adjustment valve. Recently inspected, the inside of the housing is in great shape with the gears showing normal minimal wear. Pump is set up with (2) #12 fittings for your oil filter, (1) #16 fitting for your oil pick-up and (1) #6 fitting for your oil pressure reading. Save BIG $$$'s here, so order today!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Blower Front Cover
Check out this slightly Used Kobelco Blower Front Cover that's anodized and made of cast aluminum. This one's free of any damage or repairs and comes complete with a front cover bearing and pressure relief valve already installed. If this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Kobelco Front Bearing Plate
If you need one, then here it is! This Used Kobelco Front Bearing Plate is anodized and made of cast aluminum. This hard to find item does show some minimal wear and the bearings should be replaced but if you can't locate one, but need one we will price it accordingly. It utilizes the teflon strip feature for extra added performance and if this is your supercharger brand of choice we have a limited supply of items available right here. And once they're gone, they're gone for good!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Setting the standard for years when it comes to high quality components, Waterman always delivers! And this slightly Used Waterman Wet Sump Oil Pump is no different! This one's your standard gear style, equipped with an extra scavenge and hose included to allow you to pull oil from the cylinder head or block. It has an outside oil pressure adjustment valve and was recently inspected, with both the inside housing and gears showing normal minimal wear. Pump is set up with (2) -12 fittings for your oil filter, (1) -16 fitting for your oil pick-up and (1) -6 fitting for your oil pressure reading. One more left, so come and get it!
MAKE OFFER!!!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Titanium Injector Shaft
Strong, light weight and ready to fly, this upgraded slightly Used Titanium Injector Shaft is designed specifically for all you weight conscience racers out there! This one's in nice shape and measures 20 1/2" long, with a 1/2" diameter. Both ends are equipped with the common 7/16" spline size to accommodate your throttle arms and stops. Expect to pay over $600 bucks for a new one elsewhere! But not here... Not today! Shop right here at GoNitrolink.com for all you're super trick titanium components!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Oil Pan Pick-Up
If your looking for a replacement, then this slightly Used Oil Pan Pick-Up is priced to save you a few bucks not having to buy new elsewhere! It's made of aluminum and in great shape with no damage or repairs. And could work with most any brand oil pan that's set up to accommodate a removable style pick-up like this one. It's accepts a -20 fitting size, however can be adapted to the smaller -16 size if you choose. Go with "Nitrolink" as we're always here to help get you ready for race day!
Price
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Total
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
Taylor Blower Manifold Restraint
If you're running an AJ set-back hemi blower manifold and are looking for a brand new Taylor Blower Manifold Restraint then lets save you some money right here! This one's made of silver kevlar and nomex material and designed to work with the newer style round burst panel. It's been sitting around the race shop as a spare, but was never used. It's equipped with SFI 14.5 tags that are expired, however this item is guaranteed to re-cert or your money back. It has also been priced accordingly so buy here today and save!
Digital Torque Wrench Tester
At the race track or back at the race shop, it's critical to be able to reach for a torque wrench that reads accurately every time you use it! Consistency wins races and this brand new Digital Torque Wrench Tester is the exact item needed to keep tabs on how consistent your torque wrench calibration is reading and when it's time to send out for service. This handy tool accommodates your 1/2" drive torque wrenches and has a push button conversion foot pounds to inches mode and a peak hold feature that saves your maximum reading. It's equipped with a back lit read out screen for night use and powers up using one standard 9-volt battery. Now you know where to go for all your specialty pit tools... Nitrolink!
Price: $695.00
Please call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Engine Lift Bars - Triple-T
Here they are!!! The #1 selling style of Engine Lift Bars - Triple-T on the market! This is the exact set you see on TV that the biggest name teams in drag racing reach for when it's time to do an engine swap. It takes a low center of gravity for easy lifting and this brand new set was specifically designed with that in mind and they're quick and simple to use and remove. With your cylinder heads off, slide them down over 2 head studs per side, run down a couple head stud nuts and you're done. We're happy to help anytime with all your specialty pit tool needs! GoNitrolink.com
