Hemi Inner Head Stud Nut Wrench
Here at GoNitrolink.com we're always happy to help with all you're specialty pit tool needs! And you won't find a brand new Hemi Inner Head Stud Nut Wrench like this one at your local hardware store, so grab one up right here quickly and easily! This quality tool is sure to make your job that much easier when it comes to accessing those 1/2" inner head stud nuts. It works with your 3/8" drive torque wrench to properly set those 12 point nuts to their correct torque spec. So, if you're trying to improve efficiency at the race track every time you go out, then this is one of those small details that could help make a difference! Order yours today!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Blower Starter Bracket
If you're running a blower starter, then it certainly pays to keep all the other little related components in good shape to insure your car fires up every time! So, check out this slightly Used RCD Blower Starter Bracket that's almost new and ready for action! It's made of light weight billet aluminum and in excellent shape with no damage or repairs. This one's designed to works with the SSI, or Kobelco superchargers and can definitely help prevent a lot of grief on the starting line when it comes to installing or removing your blower starter quickly and efficiently. It never hurts to prepare, order this one for a spare!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 51T - Quick Change Pulley
How about a slightly Used RCD 11mm - 51T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Price
$175.00 – $177.00Price range: $175.00 through $177.00
Total
$175.00 – $177.00Price range: $175.00 through $177.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Inline Oil Filters
Here's another quality built component that's perfect if your running the heavier 50, 60, or 70-wt. racing oils in your race car and have a limited amount of space to work with. Install one of these brand new System 1 Inline Oil Filters designed to work with either wet sump systems, or installed between the pump and sump tank if you're running a dry sump set-up. The housing is made of 6061-T6 billet aluminum and was intended to be serviced after every run, with the removable 75-micron filter element making it easy to see exactly what's happening inside your engine. It works with nitro, alcohol, or gas and can be ordered to work with either AN-10, or AN-12 size oil lines. And available in either red or black. Order one today... And it's on the way!
Choose your fitting size, fuel preference and color in the "options" menu below.
We offer a complete line of all Automan products!
Dual Magneto Handcuff Kit
Check out the quality and craftsmanship on this Dual Magneto Handcuff Kit for your MSD Pro Mag 44's. These are brand new and made of light weight billet aluminum and clamp securely to both magneto housings for a positive lock. The adjustable rods and heat treated rod ends offer yet one more safe-guard to keep both mags secure by working with your existing mag base clamps. There durable, light weight and easy to install. Ordering is simple... Just click, pay and they're on the way!
Race Engine Storage Bag Kit
Now you know exactly where to go to get em!!! This reusable Race Engine Storage Bag Kit is the perfect fit for the job. And can be difficult to find in their correct sizes when you need them. The Engine Bag is large enough to fit any (long block) race engine, including the headers and fits over most engine stands or dyno carts. And the Cylinder Head/Crankshaft Storage Bags are large enough to fit Hemi or Big Block Chevy Heads. These heavy duty, thick clear poly bags help keep those expensive racing parts free of dirt, metal shavings and other unwanted debris prior to, or after assembly. Ordering made easy, right here!
Kit includes: 1 Engine Storage Bag and 2 Cylinder Head/Crankshaft Bags.
"Nitrolink" offers a complete line of all MSD Products!
MSD Big Cap Conversion Kit - Pro Mag 44
If you're looking to change over the small cap on your Pro Mag 44 Magneto to the big cap style, then we're happy to help you with that right here! This MSD Big Cap Conversion Kit - Pro Mag 44 comes complete with all the components needed to do the job correctly. Upgrading to a larger diameter cap increases the distance between terminals and decreases the chance of crossfire or spark scatter, as well as a build-up of ozone inside the cap. Kit includes a big cap, larger rotor, cap base, and plug wire retainer.
Choose either black or red to match your other MSD components in the "options" menu below...
Price
$35.50 – $88.00Price range: $35.50 through $88.00
Total
$35.50 – $88.00Price range: $35.50 through $88.00
We offer a complete line of all Taylor Motorsports Products!
Absorbent Diaper Liners
"Nitrolink" is you're one stop shop for consumables as well... So, lets offer these handy Absorbent Diaper Liners available in 2 sizes, for Funny Cars or Dragsters. They come equipped with velcro strips at the top for easy installation or removal on both sides of the diaper. They're sold by the pair and work great with the small absorbent pillow (sold separately) that fits on the bottom of the diaper for a complete package. Don't risk being shut off at the line because of a couple small drips... These could possibly help!
Choose size needed in the "options" menu below.
Absorbent Pillow price includes 1 total.
ISP CarbonX Seat Kit
Now here's the perfect item for the "do it yourself" racers out there looking to save some hard earned cash! This ISP CarbonX Seat Kit comes complete with everything you need to pour your own custom seat to mold around your driver specifically. The fingerprint style allows for your driver to be placed in the seat the same way each and every time. It offers added comfort and could help with improving reaction time. It's poured with your driver sitting in the race car fully suited up. Seat kit contains: 2 part mix, stirrer, seat bag, 1/4" sheet of foam, duct tape, double sided tape, complete step by step instructions and CarbonX outside cloth with provision for head and neck devices. Now you're ready for the weekend!
Nomex F/C - Altered Body Gasket
Attention in the pits!!! Funny Cars & Altereds to the lanes please! And that brings us to this next item specifically designed with you in mind... This Nomex F/C - Altered Body Gasket rides right on top of your bell housing shield and was designed to close up the gap between the shield and the fire wall. This nomex padded panel measures 4" x 24" total and is easily attached with velcro. Install one today, drop that body and send it!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 36T - Blower Pulley
If you're looking for a slightly Used RCD 11mm - 36T - Blower Pulley and looking to save a few bucks at the same time, then it's you're lucky day! This one's an 11mm, 36 tooth, GT style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor, measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Price
$104.95 – $178.95Price range: $104.95 through $178.95
Total
$104.95 – $178.95Price range: $104.95 through $178.95
"Nitrolink" offers a complete line of all Littlefield Products!
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Any Size - 8mm STD Blower Pulley
Choose Any Size - 8mm STD Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
