Manifold End Seal Strips
"Nitrolink" offers a wide variety of hard to find items for all our valued customers! And these Manifold End Seal Strips are one more example! They're sold separately and measure 3/4" wide x 9 5/16" long and are available in either thick or thin size. They quickly install with high temp silicone on top of your aluminum end rails on your engine block to seal up the valley between your intake manifold and block. And at this price, don't forget your spares!
Choose either thick or thin size in the "options" menu below.
Starting Line Injector Air Bleed Valve
Here it is!!! The #1 most popular style Starting Line Injector Air Bleed Valve that the majority of the pro nitro crew chiefs reach for right before they bring their driver up to the line! This high quality component will not disappoint. It's brand new, made of light weight billet aluminum and responsible for controlling your idle speed on the starting line. It's equipped with a 1/4" pipe thread and installs on the side of your injector. And can be used in pairs if you choose. This set up is the perfect solution for a precise idle adjustment, right before you put down a number!!!
New Billet Primer Nozzle & Bottle
Now you know exactly where to go to get your New Billet Primer Nozzle & Bottle INCLUDING the Correct Bottle. Identical to what many of the pro nitro teams on tour are using! These nozzles are made of 6061 billet aluminum, anodized black and designed to deliver the exact amount of fuel needed into the injector prior to start-up. And the bottle included is the perfect size to handle on the starting line. Or, the nozzles alone could work with several different styles of bottles out there if you prefer to use your own. So, if you pay close attention to even the small details, then here's the perfect item to give your race team that professional look it deserves! GoNitrolink.com
(Empty Bottle when not in use.)
T-Handle Valve Cover Wrench
This brand new stainless T-Handle Valve Cover Wrench is one more item that's sure to help keep you're race team efficient on race day! The perfect balance on this wrench allows for quick removal, or installation of all valve cover nuts in no time! This high quality tool comes in either 7/16" or 1/2" size and is exactly what's needed to get the job done right! Helping your team organize for the race weekend is what we do best! GoNitrolink.com
Choose either 7/16" or 1/2" size in the "options" menu below.
Price
$8.50 – $9.95Price range: $8.50 through $9.95
Total
$8.50 – $9.95Price range: $8.50 through $9.95
Stainless Nut & Bolt Trays
The race car is only one part of the equation... Paying close attention to the small details in your pit area, in your race trailer, or at your race shop is also what helps get your team in the winners circle on race day! And these durable, high quality Stainless Nut & Bolt Trays are exactly what's needed to help achieve that professional look and keep everything organized and in it's place. The large size is 9.5" x 5.5" x 2.5" making it perfect for holding rocker arms, lifters, or larger size bolts. The small size is 6" x 3.25" x 2.5" and works great for bellhousing nuts, rear wheel lugs, oil pan, valve cover, or manifold nuts, or header nuts or bolts. They clean up in a flash and also work great for washing parts quickly with brake cleaner or solvent... Quality racing components, specialty pit tools and support equipment 24/7 right here!!! GoNitrolink.com
Sold Separately.
Choose large or small size in the "options" menu below.
Price
$2.95 – $4.05Price range: $2.95 through $4.05
Total
$2.95 – $4.05Price range: $2.95 through $4.05
itrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Hemi Valve Cover Nuts - Fat Heads
If you're running a set of fat heads on your race car, then here's a perfect opportunity to order a complete set of brand new Hemi Valve Cover Nuts - Fat Heads at a great price! This set of (14) total is made of durable steel, zinc coated and the 1/4" -28 fine thread size to work with your fat heads, with your choice of either a serrated or non-serrated flange. Add a set of 1/4" fine thread valve cover studs to your cart and you're all set for race day!
Choose either serrated, or non-serrated flange in the "options" menu below.
Price
$41.95 – $43.95Price range: $41.95 through $43.95
Total
$41.95 – $43.95Price range: $41.95 through $43.95
We offer a complete line of all Automan products!
Billet Burnout Stops
It's sleek, it's profiled, it's just plain awesome! These super trick Billet Burnout Stops are a team owners best friend when it comes to keeping engine RPM at a safe level during the burnout. Installs instantly on your throttle cable by the injector throttle stop. After the back up, simply pull the ring attached to the stainless safety pin clip to remove it, then bring your driver up to the beams! They're made of billet aluminum, polished and anodized for a bright brilliant shine, to stand out so you don't forget to take them off. And they're available in 2 throttle cable sizes, 10/32" or 1/4" inch. Length may need to be adjusted if needed. Instruction sheet included... Top quality products = a top quality race team! GoNitrolink.com
T Handle Torquing Spark Plug Wrench
Probably one of the most popular specialty pit tools would have to be a
T-Handle Torquing Spark Plug Wrench. And when it comes to changing spark plugs quickly and easily, this style is exactly what your race team needs to get the job done with the same efficiency and accuracy as the pro nitro teams on tour! This tool is designed to offer a correct balance while in use and allows the user to preset their desired spark plug torque spec. Once that's reached, the handle clicks and your done! This is the perfect solution to help do away with those costly repairs after accidentally blowing out the treads on your billet cylinder heads. They're powdercoated black to prevent scratching and can be ordered to fit your common 13/16" size plugs, or the smaller 5/8" size peanut plugs... When it comes to racing pit tools, now you know exactly where to go for all the cool items! GoNitrolink.com
Choose size needed in the "options" menu below.
TFX Oil Pan Gaskets
GoNitrolink.com for all your hi performance gaskets and consumables! And if you happen to be running a TFX block, then you know exactly how to put one of these brand new TFX Oil Pan Gaskets to work! These are made by Mahle and consist of a composite material, with a steel core and teflon coated on both sides to help prevent oil saturation. They're NHRA nitro legal, measure .100" thickness, are sold separately and available for both TFX '96 late, or '92 early, engine blocks. We offer a large selection of all the popular hi performance racing gaskets including cylinder head, exhaust, oil pan, blower and injector gaskets to make sure we have you covered for the weekend!
Choose late or early block style in the "options" menu below.
Heavy Duty Throttle Return Spring
Yes, we have them right here!!! These are the very popular Heavy Duty Throttle Return Springs that most of the pro nitro teams are using on their injector. And the great news is, now you know exactly where to go to get them just like they do. These are the swivel end style that offer a sharp positive return and definitely one of those hard to find items when you need one quickly. Order one for the car... And one for a spare... Then you're set!
Peanut Butter Compound Assembly Lube
Many of the pro nitro teams and alcohol teams on tour wouldn't think of using anything else but Peanut Butter Compound Assembly Lube when it comes to engine assembly at the race shop, or on race day! This is the exact product that's been so popular for so many years. It comes in a 2 pound can and works great on head studs. Just apply a little on each, run down the nuts, then torque em down. Done! Go with "Nitrolink" for all your racing consumables. We're happy to help anytime!
There's only 2 places you can go to get your "Official Nitrolink Racing Gear" and that would be either in our pit area, or right here on our website!
Nitrolink "Funny Car" Decals
Get em while they're hot!!! Official Nitrolink "Funny Car" Decals are finally here... And ready to ride along with you as you chase your dreams into the winners circle! They measure 8" across and available in 2 styles, Top Fuel Dragster or Nitro Funny Car... Be the first to show your support for the coolest place on the planet to buy racing parts!!! And don't forget to check out the other "Nitrolink Merch" items that are sure to be a hit once they hit the race track!
Choose Dragster or Funny Car style in the "options" menu below when ordering.
(Sold separately)
