Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used MSD Battery Packs & Charger Kit
Lets save you some money right here with this Used MSD Battery Packs & Charger Kit that helps power up your ignition management such as six shooters, power grid, etc. Each battery delivers 14.4 volts and all three items are in great shape and equipped with Deutsch connectors for a secure fit. This package comes complete with (1) MSD smart charger and (2) battery packs, one for the car and one for a spare. This kit will be sold with a fresh set of batteries, so rest assured your money will be well spent here!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Waterman Wet Sump Oil Pump
Setting the standard for years when it comes to high quality components, Waterman always delivers! And this slightly Used Waterman Wet Sump Oil Pump is no different! This one's your standard gear style, equipped with an extra scavenge and hose included to allow you to pull oil from the cylinder head or block. It has an outside oil pressure adjustment valve and was recently inspected, with both the inside housing and gears showing normal minimal wear. Pump is set up with (2) -12 fittings for your oil filter, (1) -16 fitting for your oil pick-up and (1) -6 fitting for your oil pressure reading. One more left, so come and get it!
Digital Torque Wrench Tester
At the race track or back at the race shop, it's critical to be able to reach for a torque wrench that reads accurately every time you use it! Consistency wins races and this brand new Digital Torque Wrench Tester is the exact item needed to keep tabs on how consistent your torque wrench calibration is reading and when it's time to send out for service. This handy tool accommodates your 1/2" drive torque wrenches and has a push button conversion foot pounds to inches mode and a peak hold feature that saves your maximum reading. It's equipped with a back lit read out screen for night use and powers up using one standard 9-volt battery. Now you know where to go for all your specialty pit tools... Nitrolink!
Price: $695.00
Please call: (916) 425-1427 anytime to order.
"Nitrolink" offers a complete line of all Triple-T Race Products!
For over 25 years Triple T Race Products has been on the front line providing top quality pit area and race shop equipment second to none. They continue to supply the majority of the biggest name teams in both top fuel and nitro funny car with products that are put to the test under the harshest conditions every weekend. And continue to meet or exceed those expectations consistently! Check out the following quality product sure to deliver both unmatched service and a professional image your race team deserves...
Top Fuel - A/Fuel Headers - Triple-T
Introduced in 1994, this exact style of Top Fuel - A/Fuel Headers - Triple-T has been setting records and winning championships ever since! Equipped with EGT bungs and ready to accept your computer probes. This style header has been extensively tested over the years and developed with all the support gussets, braces and support rods needed to withstand the extreme blast of 11,000 horsepower, then be ready for next round! They can be ordered in either 2 1/2", or 2 3/4" diameter. So, give us a call and we'll be happy to get your new set started today!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Air Powered Valve Lapping Tools
The ultimate in Air Powered Valve Lapping Tools can be found right here with one of these brand new quality built time savers that can't wait to go to work for your race team!
This style operates on 90 PSI and is sure to streamline your operation in the cylinder head assembly department. It comes complete with 3 different cup sizes (7/8", 1-1/8" and 1-1/4") and 3 valve stem adapters. Replacement Cups are also available and sold separately. The road to the winners circle may be shorter than you think! GoNitrolink.com
Powered Valve Lapping Tool
More great news! Yes, they do make a quality built Powered Valve Lapping Tool that changes the rotary action of your power drill into an effective oscillating motion to help speed up the process in your cylinder head department. Your top end technician is sure to appreciate the effectiveness of this quality built tool the first time it's put into service. It comes complete with 2 cups, with replacements also available and sold separately. Quality pit tools available 24/7 right here on our website! GoNitrolink.com
Simpson Disinfecting Helmet and Equipment Dryer
Attention all drivers... Keeping your expensive race gear in top condition is key to keeping you comfortable in the drivers seat so you're able to perform at your best. And this brand new Simpson Disinfecting Helmet and Equipment Dryer was developed to do just that! No racer looks forward to putting on a soaking wet, smelly helmet from the last round, however this handy compact unit eliminates that all together... But that's not all! It also comes complete with attachments to dry and sanitize your race gloves and driving shoes as well. This unit plugs into your standard 110v outlet and is equipped with a quick 20 minute ozone feature that cleans and disinfects for a healthier environment. And it provides a safe heat temperature designed specifically for the interiors of rated helmets to prevent mold, and mildew before it starts. It helps condition your helmet liner and cheek pads that degrade over time from perspiration and bacteria by slowing down the process, keeping your equipment in peak condition. Now you can quickly refresh your gear in between rounds, so you're able to focus on one thing... Winning!
Racers helping racers do what they do best! GoNitrolink.com
A NOTE ON OZONE:
Ozone is used widely for sterilizing; this dryer generates ozone by the corona discharge method. Ozone is a pale blue gas with a distinctively pungent smell, detectable by many people at concentrations of as little as 0.01 ppm in air. Ozone is formed naturally from diatomic oxygen by electric discharge or exposure to ultraviolet radiation. Ozone is a powerful oxidant and has many industrial and consumer applications related to oxidation; it is used to deodorize air, purify water, disinfect kitchen tools and treat industrial wastes. Although ozone is widely used in industry and commerce the ozone layer, a portion of the stratosphere, is beneficial: It prevents damaging ultraviolet light from reaching the Earth's surface. This same oxidizing property, however, causes ozone to damage mucous and respiratory tissues, so for safety and comfort purposes, the manufacturer recommends using the dryer and sterilizer in a space with adequate ventilation, and stay away from it while it is disinfecting objects with ozone.
Helmet & Gloves in the photos are also available and sold separately.
Peanut Butter Compound Assembly Lube
Many of the pro nitro teams and alcohol teams on tour wouldn't think of using anything else but Peanut Butter Compound Assembly Lube when it comes to engine assembly at the race shop, or on race day! This is the exact product that's been so popular for so many years. It comes in a 2 pound can and works great on head studs. Just apply a little on each, run down the nuts, then torque em down. Done! Go with "Nitrolink" for all your racing consumables. We're happy to help anytime!
Driver / Crew Nitro Masks
So, the fans sure love that morning dose of nitromethane fumes during a warm-up first thing in the morning on a race weekend! But the racers and crew... Maybe, not as much! So how about we offer these Driver/Crew Nitro Masks to make that process a lot easier for all of you to work with. These are made with a durable compression silicone rubber that provides exceptional comfort. The universal "one size fits most" design offers a balanced low pressure positive seal. They're equipped with a hard coated, anti-scratch, anti-fog treated poly-carbonate lens that offers an extended large panoramic field of vision. These masks are NIOSH Approved and fitted with 5 quick release buckles that allows for a fast easy removal and provide an even comfortable fit to prevent slipping. The quarter-size inhalation valves allows the user to inhale a larger volume of air per breath, allowing for more comfort and productivity. And a nylon storage/carrying bag is included as well. Order one, or a dozen with just a few clicks right here... Job done!
Injector Tool Tray
Now here's a cool item that never seems to go out of style! And if your running an Enderle Bug, Bird, or Buzzard Catcher Injector then this is your lucky day! This super handy brand new Injector Tool Tray is ready to help keep your race team organized in between rounds. It's durable, made of aluminum and powder coated black to resist scratching. It's equipped with 3 divided areas inside and holds up to 16 spark plugs. It sits securely on top of your injector utilizing 3 "L" brackets that you rivet in place depending on the size injector you have. It's that simple! Now that you're getting organized, the only thing left to do is go win!
Piston / Rod Rack
It's strong, it's durable and it's ready to offer your race team, trailer, or race shop that professional look it deserves! This high quality Piston/Rod Rack is brand new and perfect for holding your complete set of pistons & rods while you service them. When you're finished, carry the whole set out, rack and all to your race car for installation. It measures 22 1/2" long by 11" wide by 8 1/2" tall. The top is equipped with a vinyl coating to prevent piston damage. And it also has an easy to clean drip tray on the bottom. Pretty cool!!! And works great for storing complete sets in your trailer during transport. Don't lay those expensive pistons & rods on the work bench or elsewhere and risk picking up dirt, metal shavings, etc; before they're installed. You're only a few clicks away, to get one on the way!
Price
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
Total
$1,400.00 – $1,950.00Price range: $1,400.00 through $1,950.00
"Nitrolink" offers a complete line of all Dan Olson Race Products!
Dan Olson Top Fuel - A/Fuel Headers
Check out the photos on this brand new set of Dan Olson Top Fuel - A/Fuel Headers and then think of how awesome they would look on your Top Fuel or A/Fuel Dragster, Blown Altered, Tractor Puller, Drag Boat and so on... They can be ordered to fit any stage fuel heads or fat heads by Alan Johnson, BAE, Dart, etc. And are available in either 2 1/2", or 2 3/4" tube diameter with the standard degree bend. They can be set up with or without EGT bungs ready to accept your Racepak or similar Computer Probes if you're running them. And each set comes complete with lightened reinforcement tube gussets to complete this very nice package!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
