We offer a complete line of all Manton Racing Products!
Manton Hemi Exhaust Rockers
One of the best ways to help prevent costly engine damage starts right here! And If you're looking for one of the strongest durable cylinder head components on the market, then look no further! These brand new Manton Hemi Exhaust Rockers are ready to be pressed into service and can be ordered separately or as a complete set. These are the upgraded billet style with the super trick oiler hole by the adjuster that work with your 426 hemi fuel heads only. They're the standard 1.65 ratio and ready to accept your 7/16" size adjusters & nuts (sold separately)... Save, Race, Win, Repeat! GoNitrolink.com
Price: $273.95 each
Chassis Stabilizer - Rectangular
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Rectangular style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the smaller 23 1/4" x 7" rectangular style, manufactured from durable rubber. This style works best on applications where the chassis is 1.125" to 3" from the trailer floor. Its sleek design and 1.125" deflated height allows it to slide under the lowest ground clearance vehicles and it inflates to an adjustable maximum height of 4". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Round 10" lift style also available.
Price
$291.43 – $410.41Price range: $291.43 through $410.41
Total
$291.43 – $410.41Price range: $291.43 through $410.41
Complete Fuel Hydrometer Kit
Over the years, we have found premium alternatives to every component and had them assembled all together right here to offer this brand new Complete Fuel Hydrometer Kit for all our valued customers! Other brands just don't deliver when it comes to durability, accuracy and clear readability. So, this kit includes a large diameter beaker that's perfect for pouring fuel in an out of and is less prone to tipping over. The durable stainless steel dial thermometer included is equipped with a fuel-proof bezel and replaces the fragile "old school" mercury glass thermometer. The Hydrometers are finely graduated and deliver a clear, accurate nitromethane reading from 0% to 100% if you choose, (with the 4 hydrometer kit). If the full range is not required, then no problem... Just choose the smaller size kit with the range you need and you're all set! All kits include a large fuel-proof polyethylene padded custom die-cut foam case, along with a nitro chart and instructions. Here at "Nitrolink" we sell you just what you need and not what you don't!
Choose the number of Hydrometers needed & range(s) in the "options" menus below.
(0%, Gas & Methanol) (2% - 35%, Nitro) (32% - 60%, Nitro) (60% - 100%, Nitro)
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Fuel Head Exhaust Rockers
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
And if you're running fuel heads, then take a look at these brand new BAE Fuel Head Exhaust Rockers that are sure to take your rocker assembly to the next level! These are made of billet steel and can be ordered individually or as a set. These are the standard ratio style, ready to accept your 7/16 size adjusters (sold separately). Pair these up with a set of Stage 5 Intake Rockers then start booking race dates!
"Nitrolink" offers a complete line of all Brad Anderson Racing Products!
BAE Fat Head Exhaust Rockers
Over the years BAE has been responsible for helping a countless number of race teams find their way to the winners circle! The quality and craftsmanship that goes into every product they manufacture is what's responsible for delivering optimum performance both on and off the race track! And this product right here is just one more example...
And if fat heads are you're weapon of choice, then let's offer a brand new set of BAE Fat Head Exhaust Rockers to help those billet cylinder heads deliver maximum horsepower! These are made of billet steel and can be ordered individually or as a set. They work with your Brad 4's, 5's, or 6, fat heads and available in either standard or hi ratio and ready to accept your 7/16" size adjusters (sold separately). And if you need a nice set of intake rockers to go with these, then check out the Stage 5's we have available that would pair up nicely for a complete set! Order yours right here today!
Choose either Standard or Hi Ratio in the "options" menu below.
Hemi Cam Degree Tool
The critical job of dialing in your camshaft after engine assembly just became a whole lot easier with this hard to find high quality Hemi Cam Degree Tool that comes complete with a dial indicator and aluminum head stud spacers that are also included to get the job done with precision accuracy. Simply drop the plate over the head studs on your #1 cylinder then go to work! Top plate is anodized black to help prevent corrosion and this kit is ready to provide years of service if cared for properly. Specialty pit tools available 24/7 right here! GoNitrolink.com
"Nitrolink" offers a complete line of all MSD Product!!!
MSD Self Powered Pro Timing Light
To make every run count, you need to start off with an accurate timing reading before you tow up! So, we have the perfect solution for that right here with this MSD Self Powered Pro Timing Light. This model runs off of 6 AAA batteries, making it much easier to use on any race car without battery access. This feature also reduces the amount of extra wiring that gets in the way in the engine compartment while you're trying to work. It's bright, light weight, durable and detaches easily for quick storage. Includes batteries and detailed instruction guide. So add some more lead, accurately this time and drop the hammer!!!
Powered Valve Lapping Tool
More great news! Yes, they do make a quality built Powered Valve Lapping Tool that changes the rotary action of your power drill into an effective oscillating motion to help speed up the process in your cylinder head department. Your top end technician is sure to appreciate the effectiveness of this quality built tool the first time it's put into service. It comes complete with 2 cups, with replacements also available and sold separately. Quality pit tools available 24/7 right here on our website! GoNitrolink.com
Chassis Stabilizer - Round
Here's one of the best ways to protect your investment!!! This brand new Chassis Stabilizer - Round style was designed to help prevent costly chassis damage to your Dragster, Funny Car, Altered, Hot Rod, or any low ground clearance vehicle during transportation to and from the race track by keeping your vehicle stable. It's placed directly under your Race Car, Show Car or Collectible Car prior to transport to help eliminate constant excessive unwanted chassis flex in the trailer. It also helps protect on-board computers, electronics, suspension components, struts, springs, torsion bars, etc. And is highly recommended for all longer wheel base race cars. This one's the popular 18" diameter round style, manufactured from durable rubber. Its sleek design and 1.75" deflated height allows it to slide under the lowest ground clearance vehicles and it can inflate to an adjustable maximum height of 10". It comes complete with a 6' hose kit and a gate valve. To operate it, simply slide the deflated stabilizer under the most flexible point in the chassis and inflate it to 15-20 PSI... Quality hi-performance components taken to the next level! GoNitrolink.com
Rectangular 4" lift style also available.
Tel Tac II Digital Tachometer
Small, light weight and easy to read on the starting line! This brand new Tel Tac II Digital Tachometer is sure to provide your crew chief with the exact data needed to make any last second idle adjustments right before you bump it in! Equipped with an LCD digital readout and "telltale" memory, it's easy to configure and compatible with most engines and ignitions, to include MSD Pro Mag 44's, Vertex and Mallory Magnetos, or battery powered ignition systems. It turns on automatically when the engine is started and reads RPM in hundreds, from 500 RPM to over 12,000 RPM on V-8 engines, and to 15,000 RPM on smaller cylinder engines. After the engine's shut off, the highest RPM attained is shown for 30 minutes. This unit is powered by a 9-volt alkaline battery that should last for hundreds of hours and has a low battery warning when it's time to be replaced. And it comes complete with a wiring harness, mounting plate and instructions. Please note: This item will not work with odd fire V-6, V-4 with Vertex internal coil magneto, or 4-cylinder engines with EFI... Quality racing components available right here on our website 24/7! GoNitrolink.com
Cold Sleeve Puller Jack
At "Nitrolink" it's all about offering all our valued customers different options! And when it comes to replacing sleeves at the track here's a great alternative! This brand new
Cold Sleeve Puller Jack works fantastic when it's time to get the job done quickly and easily. They work with your air impact gun, can be ordered to fit any sleeve size and don't require you to heat up the block prior to sleeve extraction. This top quality tool is strong, durable and small enough to store away easily. Order the right tool for the job right here today, for a happier sleeve pulling experience tomorrow!
Choose bore size needed in the "options" menu below.
Custom bore sizes also available. Call for details.
Price
$346.00 – $366.00Price range: $346.00 through $366.00
Total
$346.00 – $366.00Price range: $346.00 through $366.00
"Nitrolink" offers a complete line of all System 1 products!
System 1 Pro Series Spin-On Oil Filter
Unmatched quality and craftsmanship second to none! You're looking at one of, if not the best oil filtration set-up's on the market!!! This brand new System 1 Pro Series Spin-On Oil Filter is made of billet aluminum and can be used on supercharged, nitro-burning, injected nitro, supercharged alcohol, or gas applications. It's anodized black for that cool stealth look, with a reusable filter element inside that can easily be inspected or serviced by simply removing the inspection cap. It's equipped with the correct 75-micron element for use with heavy weight oil. Or, can be ordered with a 45-micron element if you're running a lighter weight oil. And o-rings are also included. Another quality product to add to your race team!
Choose your element size & fuel application in "options" menu below.
