Digital Dash Cover Lens
GoNitrolink.com is your one-stop shop for some of the coolest race parts on the planet... But, also their replacement parts as well! If you have one of our Racepak Digital Dash Covers, then it may be time to replace your scratched, worn out Digital Dash Cover Lens with a brand new one. Once you remove the protective covers seen in the photo, your crew chief will once again be able to see all your real time data on the starting line crystal clear once again. And not only are we going to make ordering 'em super easy. But also super affordable as well... Just click, pay and it's on the way!
Sold separately.
Digital Dash Cover - Racepak
Helping to keep one of your main on-board computer components safe is the only job this brand new Digital Dash Cover - Racepak was designed to do! This one works with the popular Pro 2 or Pro 3 early style digital dash. It comes complete with a replaceable clear top lens that not only helps protect your dash from fuel, hot oil, brake cleaner, or track debris. But also offers your crew chief optimum visibility for a clear look at real time data on the starting line. It's durable, light weight and easy to install. And commonly mounted on top of your air timer "tool box" if you're running a front engine dragster or funny car. Or, on the firewall under the roll cage if you're running a rear engine dragster (hardware not included). This item is definitely worth every penny and one of the best ways to help protect your expensive investment... All the cool components offered right here 24/7! GoNitrolink.com
Replacement Lenses also available.
Alan Johnson 426 Hemi Blower Manifold
Super clean and ready to install right out of the box! Check out this Alan Johnson 426 Hemi Blower Manifold for your nitro, alcohol, or gas burning Dragster, Funny Car, Altered, Drag Boat, or ? This manifold is the .100 tall, 6 bolt style that's slightly used, in great shape and made of light weight magnesium. It free of any damage or repairs and measures right at 6" tall. And has provisions to run port nozzles if you choose. Otherwise, just plug them off. Oil filler inlet location is in the back for easy access (cap not included). And this one's set up to run the standard, large size burst panel in the back (sold separately). However, it can be easily modified to run a burst panel in the front if you choose. The Blower opening at the top is o-ring ready and measures the standard 4 1/4" wide by 15 13/16" long. And this manifold can work with your SSI, Kobelco, Littlefield, PSI, Mooneyham, or Kuhl, 6-71 to 14-71 roots style superchargers. It can be used with your fuel heads made by BAE, or Dart, that are set up for a 6 bolt manifold. As well as any Alan Johnson Stage 5's, 6's, or 7 fuel heads.
PLEASE NOTE: This manifold WILL NOT work if you're running "fatheads" like the A/Fuel cars are running, (such as Brad Stage 3's, 4's, 5's, etc). A brand new manifold just like this one is going to set you back over $3400 Bucks!!! But don't even think about spending that much when you can pick up this super clean set-up right here for a fraction of the cost... Helping your team save big $$$'s is why we're here! GoNitrolink.com
Priced to move at: Only $2495. Or best offer.
Extra Deep Clutch / Head Stud Nut Socket
Cool racing components taken to the next level... "Nitrolink" offers hard to find specialty pit tools like this one to all our valued customers to help make certain jobs easier and more efficient! So, lets offer this brand new Extra Deep Clutch / Head Stud Nut Socket that eliminates several problems at once by itself...
1. Completely does away with using an extension when re-torquing your head stud nuts delivering a more precise torque spec.
2. It extends past your rocker stands, shafts, etc; when removing or re-torquing your head stud nuts.
3. Extended length allows you to re-torque clutch stand nuts quickly and easily with the bellhousing on.
4. It extends past the bellhousing just enough to prevent from loosing it while re-torquing clutch stand nuts, doing away with having to use an extension.
This high quality tool is made to last from heat treated steel and measures 7" in length, to fit your 1/2" drive torque wrench, breaker bar, etc. And can be ordered in either 11/16" or 13/16" sizes to fit your 12 point nuts. Not intended for use with air or battery impact guns. Order one right here today... And it's on the way!
Keith Black 426 Hemi Magnesium Valve Covers
Go with Nitrolink Racing Components for all your hard to find racing parts and accessories! And we'll keep delivering items just like this rare, set of Keith Black 426 Hemi Magnesium Valve Covers to help raise the cool factor on your awesome ride just a little more! This set is made of light weight magnesium, then was dow 7 coated for that signature look. They're slightly used, in very nice shape and free of any damage or repairs and ready to work with your fuel heads equipped with 5/16" size studs. Plus, they're the extremely popular dual plug style, that can also be used if you're only running 8 spark plugs by simply adding a set of removable aluminum block-off caps (sold separately). Includes everything you see in the photos. Plug tubes sold separately. This style valve cover is getting tougher to find out there in this condition and won't last long, so just like on the race track, reaction time will win this set right here! Hard to find racing components taken to the next level right here! GoNitrolink.com
Carbon Fiber Engine Containment Diaper
State of the art nitro & alcohol racing components are what we do best! And when it comes to one of the nicest buckets on the market, check out this brand new Carbon Fiber Engine Containment Diaper that's ready to offer a quicker, cleaner option than the standard fabric style diaper during removal & installation in between rounds. It's light weight and can be ordered to work with either the TFX or BAE/KB 426 Hemi aluminum blocks. And this one, unlike the other carbon fiber bucket on the market comes outfitted with light weight titanium side plates to help offer extra added protection in the event of connecting rod failure. Also included is a set of 4 upgraded kevlar mounting straps that can be ordered with your choice of either the header mount style (pictured) or chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags. And a set of 2 side absorbent pads are also included as well. Please specify your brand of oil pump, wet or dry sump and pan measurements when ordering... The coolest place on the planet for Carbon Fiber Drag Racing Components! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Rob Moore Performance Products!
Moore Performance Reverser Output Shafts
Quality second to none is exactly what you'll find right here! And these brand new
Moore Performance Reverser Output Shafts are the only choice of the majority of the pro nitro teams on tour for two reasons... Performance & Durability! These are sold separately and work specifically with the Moore Reverser. They're the standard 1 3/4" 40 spline style that's offered in 2 lengths: Large = 6" out from the reverser. Or, Small = 3.265" out from the reverser, with other custom lengths available. They're made of heat treated steel and are a work of art when it comes to craftsmanship! Hi performance taken to the next level, right here! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Rob Moore Performance Products!
Moore Performance Custom Input Shafts
Performance, Durability and the choice of Champions is what you're looking at right here! Check out these brand new Moore Performance Custom Input Shafts that are being offered in 3 popular sizes: 1 3/8" 10 spline, 1 3/4" 10 spline, or 1 7/8" 10 spline on the clutch pack side. They're sold separately and can be ordered to work with your Moore Performance or Lenco reverser if you're running direct drive. Or, Lenco or B&J transmissions, with your choice of either a large or small pilot size. They're made of heat treated steel and another example of craftsmanship at its finest! Next level, hi performance components 24/7 right here! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Manifold Lapping Plates
Keep that supercharger on your race car performing at it's best with one of the nicest Manifold Lapping Plates on the market to help keep it flat and true! This heavy duty high quality specialty tool is brand new and the perfect item to have at your race shop, or in your pit area on race day to help your manifold provide a nice even surface for a complete seal. This one's made of billet aluminum and comes complete with 1 disposable self adhesive sheet of sand paper. (Extra sheets sold separately). It measures 1" thick and is equipped with 2 comfortable handles to help deliver a consistent result. It stores away nicely in your race trailer or shop and ready to go to work right when you need it most! Top quality right here! GoNitrolink.com
Extra sheets of sand paper are also available right here on our website.
Heavy Duty Valve Lash Adjusting Torque Wrench
Designed specifically for Blown Nitro & Alcohol Engines... And custom built to meet your specs!!! This high quality precision Heavy Duty Valve Lash Adjusting Torque Wrench comes equipped with a longer handle for better leverage. It simplifies precision valve lash settings by properly torquing all adjuster nuts accurately. And this style is delivered to your door preset to the torque spec of your choice, from 20 to 45 lbs. It also comes complete with your choice of either a 7/16" or 1/2" 12pt. socket that's welded on... So it stays on! And finally, choose your Hex Key size, either 5/32 or 3/16 and you're all set... Custom designed just for you! Specialty Pit Tools and a whole lot more, right here! GoNitrolink.com
Choose Socket size, Hex Key size and Torque preset in the "options" menu below.
Dragster Nose
Ready to start on that Dragster project out in the race shop yet? Well, then this next item could be exactly what you've been looking for... And let's save you both time and money buying it right here!!! This slightly used Dragster Nose is in nice shape, made of fiberglass, weighs 3 lbs. and measures: 30 3/8" long by 10 1/4" tall in the back. And 14" inside at it's widest point. We'll price this one accordingly, as it has a small crack that can easily be repaired on one side right at the bottom. After that, choose your paint color and get ready for the big day! Unmatched Customer Service, right here! GoNitrolink.com
JT Stewart Barrel Valve Enrichment Knob
Paying close attention to all the details is usually what gets the job done on race day! And if you're running a JT Stewart Barrel Valve then lets get you set up with a brand new JT Stewart Barrel Valve Enrichment Knob just like this one to match! It's made of light weight billet aluminum, anodized black and features a knurled outside edge and white legible numbers to insure a precise adjustment. It's designed to fit on either the larger big show, or nostalgia style JT Barrel Valves. As well as the older style JT models... These are sold separately and also include a set screw for a quick easy install. All the right components + unmatched customer service = GoNitrolink.com
