Billet Dual Feeler Gauge Handle
At "Nitrolink" it's all about choices! So, here's one more Billet Dual Feeler Gauge Handle
if you prefer using the longer style that holds 2 separate gauges on the opposite ends of the handle. They're strong, durable, made of billet aluminum and ready to assist your top end technician when it's time to quickly run thru a set of valves. They measure 5" x 1" x .5" total and can accept various sizes of 1/2" wide feeler gauges depending on your application. And can be stacked 3-4 gauges high if you choose... Specialty pit tools 24/7 right here! GoNitrolink.com
Choose either blue, or red in the "options" menu below.
Sold separately, Gauges not included.
Heavy Duty Siphon Drum Pump
So, lets make the task of moving race fuel from the drum to your fuel jugs a whole lot easier with this brand new Heavy Duty Siphon Drum Pump to help get you ready for the long race weekend! This one moves approx up to 7 gallons per minute and is equipped with a 33" hose. It's compatible with most fuels, oils and solvents to help make your liquid transfer job quick, clean and easy... Save more, race more, win more! GoNitrolink.com
CAUTION: Not recommended for Alcohol Fuels.
Nomex F/C - Altered Body Gasket
Attention in the pits!!! Funny Cars & Altereds to the lanes please! And that brings us to this next item specifically designed with you in mind... This Nomex F/C - Altered Body Gasket rides right on top of your bell housing shield and was designed to close up the gap between the shield and the fire wall. This nomex padded panel measures 4" x 24" total and is easily attached with velcro. Install one today, drop that body and send it!!!
Quick Release Breather Ends
If you're about ready to replace your tired worn out set and looking to save a few bucks at the same time... Then why not do it right here with this brand new set of Quick Release Breather Ends. These are made of billet aluminum, anodized black and work with the 1 3/4" size breathers without o-rings that are equipped with the quick release locking style pull pins. One more brand new product, without the brand new price! GoNitrolink.com
Sold as a set.
Price
$50.95 – $349.95Price range: $50.95 through $349.95
Total
$50.95 – $349.95Price range: $50.95 through $349.95
We offer a complete line of all MSD Products!
MSD Straight Spark Plug Wire Boots - Pro Mag 44
GoNitrolink.com is your one stop shop when you're ready to build that new set of plug wires as we're always right here to help! These MSD Straight Spark Plug Wire Boots - Pro Mag 44 work with your Pro Mag 44 running the common 8.5 mm size wire. This high quality product is made of silicone, providing an excellent resistance to heat and maximum protection against spark loss. Designed to last, you know you're hard earned $$$'s were well spent right here!
Choose a package of 10, or box of 100 total in the "options" menu below.
Economy Cylinder Head Holders
If you're a racer on a budget, then "Nitrolink" is always happy to help keep you out there going rounds! So, lets offer a brand new set of Economy Cylinder Head Holders ready to help do just that. These are made of durable steel and designed to hold your cylinder head with either side up. The tapered pins fit any size stud/bolt holes and loosen with a twist. They're perfect for changing valves or springs, or guide knurling, with plenty of clearance to remove arbors and reamers. They're compact and store away quickly and easily in your race shop or trailer. Efficiency counts on race day... So order a set today!
Compression Testers
Next time reach for one of these brand new high quality Compression Testers when your looking for a quick, easy, less expensive way to hopefully catch serious engine damage before it occurs! This one's the 0-300 psi model and one way to check for bent or leaking valves, bad ring seal, or even leaking head gaskets. It's equipped with a rubber bumper guard, quick disconnect hose for easy installation and removal, along with a pressure relief valve and 14mm plug adapter. GoNitrolink.com for all your specialty pit tools!
Wrist Pin Driver Tool
Specifically designed to perform one task and do it with ease and accuracy! This brand new Wrist Pin Driver Tool is anodized black and made from durable, high quality billet aluminum to insure a long life. Changing Pistons just became easier, because now you have the right tool for the job! GoNitrolink.com for all your specialty pit tool needs!
Replacement Fuel Flask
Great news!!! "Nitrolink" carries all the replacement parts for the Deluxe Hydrometer Kits just in case! No need to worry if something was broken in the heat of battle on race day because this brand new Replacement Fuel Flask is easily replaced right here on our website! The large diameter design is perfect for pouring fuel in an out of and is less prone to tipping over. Unmatched customer service available right here! GoNitrolink.com
Bearing Scraper Tool
Another "Nitrolink" specialty tool that's sure to make your job that much easier both at the race track or in your race shop! This brand new Bearing Scraper Tool is the perfect multi-purpose tool to add to your collection. It works excellent for shaving cam and babbit bearings to eliminate high spots after installation to ensure correct oil clearance. The Scraper blade measures 4" long and equipped with 3 cutting edges. And is mounted in a wire wound wood handle for strength and split resistance. Now you know exactly where to go for all your hard to find specialty tools. Order one right here today!
Billet Remote Starter Button
Supplying your race team with all the right equipment to make sure you're prepared on race day is what we do best! So, check out this brand new Billet Remote Starter Button that allows you to crank over your motor from the engine compartment to help streamline the process when it comes to checking compression, doing a leak-down, setting valves, or turning over your engine to get oil pressure. It's quickly connected to your starter motor or solenoid prior to use, then easily removed when your done... Specialty Pit Tools taken to the next level! GoNitrolink.com
WARNING: Fully disconnect any coil wire(s) prior to use to help avoid accidental start up's in gear!!!
We offer a complete line of all Pit Pal products!
Air Hose Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And keeping your race trailer organized and efficient for the race weekend will be a whole lot easier with a brand new Air Hose Holder just like this one! It's heavy duty, made of durable aluminum, hand welded and built to last. Measurements are 6.5"H x 7.5"W x 5.5"D plus, it can work just as well in your race shop, or garage... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Hoses/Cords not included.
