Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Price
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Total
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
New 11mm - 57T - Quick Change Pulley
If you're looking for a New 11mm - 57T - Quick Change Pulley offered at a discounted price, then it's you're lucky day! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 50T - Quick Change Pulley
How about a slightly Used RCD 11mm - 50T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 51T - Quick Change Pulley
How about a slightly Used RCD 11mm - 51T - Quick Change Pulley that's ready for showtime! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. And measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
"Nitrolink" offers a complete line of all System 1 products.
System 1 Billet Wet Sump Hemi Oil Pump
Once you tow up, your attention is directed to making sure your race car starts... After that, you better have good oil pressure, right! This System 1 Billet Wet Sump Hemi Oil Pump is the exact same component many of the pro nitro teams on tour are using for several reasons. They're outstanding flow characteristics, versatility and long-term dependability are counted on weekly to keep those 11,000 horsepower engine alive. And could work just as well for your team! They can be ordered in the following: 1.8, 2.1, 2.4, 2.7, or 3-inch tall gear size, to provide the desired volume (up to 50 GPM) and can be set with adjustable pressure ranges (80-125 psi “low” and 125-250 psi “high”) for virtually every application from fuel injected A/Fuel cars, to nitro-burning supercharged “Big Show” cars. Choose from three different style oil pick-up fittings; AN -16, AN -20, or special AN -16 quick-disconnect fitting for use with System 1’s special scavenging hose. This pump is equipped with an AN -8 size o-ring boss port for functions such as oil pressure gauge, Racepak or other on-board computer sensor, or rear oiling. And also includes two AN -12 IN/OUT fittings for the filter. They're machined for an AN -20 fitting on the scavenge side of the pump (AN -16 to AN -20 fittings available).
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offers a complete line of all PSI Supercharger products!
PSI Screw Blower Mini Snout
Now here's an item that's sure to grab the attention of all you racers out there running a screw blower!
This brand new PSI Screw Blower Mini Snout is made of billet aluminum and works with your C, or D, style superchargers only. It's precision cut and o-ring equipped on the inside for a tight seal to prevent leaks. And mounts up to your front cover using 12 bolts to work with your 8, or 11, mm mini snout blower pulleys that attach with 6 bolts total. Inside shaft is heat treated for optimum strength making this high quality PSI performance product ready for battle if you are!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 1/4"-28 Fine Thread - Pack of 10
These Jet Nuts - 1/4"-28 Fine Thread - Pack of 10 - are coated steel to fit your 5/16" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 5/16"-24 Fine Thread - Pack of 10
These Jet Nuts - 5/16"-24 Fine Thread - Pack of 10 - are coated steel to fit your 3/8" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts - 7/16"-20 Fine Thread - Pack of 10
These Jet Nuts - 7/16"-20 Fine Thread - Pack of 10 - are coated steel to fit your 1/2" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
Price
$439.95 – $598.95Price range: $439.95 through $598.95
Total
$439.95 – $598.95Price range: $439.95 through $598.95
"Nitrolink" offers a complete line of all Littlefield Products.
Littlefield Polished Blower Snouts
When it comes to blower components, it's not always a smart move to go with the least expensive brands available. Because on the race track, horsepower always finds the weakest parts, right! So lets offer top of the line quality at a fair price right here with these
Littlefield Polished Blower Snouts. Made of aircraft-grade billet aluminum and available in a variety of sizes sure to fit your specific application, these premium snouts are available in 3 7/8", 5 1/8", 6", 7" and 8 5/8" lengths. They're loaded with a double-ball bearing and equipped with premium oil seals. The shaft is made from 4100 heat-treated steel delivering one of the strongest and most reliable on the market. These high performance blower snouts have consistently proven themselves over the years that they can stand up to the most demanding racing conditions, then be ready for the next round!
Choose Snout Length needed in the "options" menu below.
Bypass Jet Wrench
In the staging lanes it's always hurry up and wait, right! However if you need to do a lightning fast jet change right before your run, do we have the perfect tool for you! This handy Bypass Jet Wrench is anodized black and made of light weight billet aluminum. It has provisions to hold up to 8 different size jets in the handle. And equipped with a built in recessed hex at one end, to remove and tighten back up the plug on your barrel valve. And the correct size tip at the other end to install your new jet without causing damage. Carry everything needed right in your pocket, then go get it handled!
Jets in the photos are sold separately.
"Nitrolink" offers a complete line of all Sander products!
SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black
If your in the market for a new set of wheels that can perform on the race track just as good as they look! Then check out this brand new set of SFI 15.3 Sander 16x16 Beadlock Rear Wheels - Black anodized for that awesome appearance we just can't get enough of! This set is NHRA "tech friendly" with SFI 15.3 tags and can be ordered in either 5 on 5, or the popular 5 on 5.5 bolt pattern. And come with a 4 1/4" offset/backspace. The beadlock rings utilize 24 bolts total on the outside, as well as the inside and are made from billet material and not formed and welded like other rings. Centers are made using the highest quality forged aluminium that produces a product second to none! If you have any further questions, just give us a call as we're here to help anytime!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
