Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
We all know the importance of having a good clutch program in place and how setting your race car up with the correct components right from the start can save you countless hours in the pits, multiple runs on the track and a whole lot of frustration. And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Funny Car, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape. And in fact, has only 1 burnout on it since it was inspected. This one's the 10.7 size, equipped with the lighter weight aluminum pressure plate, flywheel and upgraded titanium donut. It's set up to run 3 disks (not included) and is the 6 stand model with the popular big stands and titanium adjusters. This set-up was recently certed, and is ready for showtime!!!
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch... Then be prepared to spend right at $5,000 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for half the cost of new, making this the perfect opportunity to save thousands!!!
Available immediately and priced to move.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Crower Pedal Clutch
How about a clutch program that's sure to help all Racers on a tight budget tow up to the lanes that much quicker! And if your looking to potentially save thousands of $$$'s at the same time... Then we might just have the solution right here!!! This Crower Pedal Clutch could work on your nitro, alcohol, or gas burning front or rear engine Dragster, Altered, or Nostalgia A/Fuel Car. It's slightly used and in great shape and has not been run since it's last inspection. This one's the 10" size, equipped with the lighter weight aluminum pressure plate, flywheel and donut. It's set up to run 2 disks (not included) and is the 6 stand model with 1/2" studs, with all adjusters included made of titanium.
Why buy new???
So, if you've had a chance to shop around for a new Pedal Clutch. Then be prepared to spend right at $3,500 bucks or more for a set-up like this one! But don't even think about doing that if you're looking to save BIG time! This one will sell for way less than the cost of new so don't delay, order today!
Priced to move at: Only $1695.00
Pedal Clutch Dial Indicator
If you're running a pedal clutch then this brand new Pedal Clutch Dial Indicator is going to make your clutch technicians job a whole lot easier on race day! Having a dependable high quality precision tool like this one is highly recommended to ensure a proper accurate adjustment in between rounds in order to establish a consistent clutch program. One more small detail that could make a big difference at the end of the day going into the final round!
Price: $159.95
Please note: Specify your brand of clutch when ordering. Please call: (916) 425-1427 to order.
We carry a complete line of all Molinari products!
Nostalgia Titanium Glide Clutches
Nostalgia Top Fuel Dragsters and Funny Cars to the lanes please!!! But before you pull up, let "Nitrolink" set you up with one of these brand new Nostalgia Titanium Glide Clutches made by Molinari, to help establish a consistent tune-up, to keep you in the game on race day! And check out the quality craftsmanship on this work of art... Awesome! These can be ordered in all titanium, or other options in either 10" or 10.5" size to work with your specific application. Choose either 2, or 3 disk with large or small size stands, along with several different lever radius options because a good clutch program equals consistency... And consistency wins races!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Molinari Titanium Pedal Clutch
Top of the line hi-performance is what you're looking at right here with this state of the art upgraded Molinari Titanium Pedal Clutch that's available immediately and ready to take your clutch program to the next level! This one's the 10.5 size, 6 large stand style, that utilizes 3 disks. It was made by Molinari Racing Products and features an all titanium pressure plate, donut and 426 hemi flywheel. Plus, it's as close to being brand new as you can get, with only 1 race! It's free of any damage or repairs and comes complete with a slightly used set of ARP flywheel bolts and a dial indicator with case that are also included as well. And here's more great news...
1. This one's in stock and ready to ship immediately... Zero wait time!
2. Save almost a "grand" off the new price, buying this one right here!
3. The road to the winners circle is shorter than you think! GoNitrolink.com
Priced to move at only: $9500. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Clutch Pack Loader
Helping your race team stay efficient and organized on your journey to the winners circle is what we do best! And adding a brand new Clutch Pack Loader like this one to your program is sure to check both of those boxes! This heavy duty tool is professionally made of aluminum with billet components and anodized black. It completely eliminates having to install each disk and floater separately, one at a time. Just load your complete clutch pack with both disks and floaters directly on to the loader. Then carry everything out to the car, then slide everything off the loader using your clutch pack line up tool (sold separately) for a much quicker, more efficient installation. It comes equipped with a handle at the top and billet stands on the bottom so it sits upright next to the car ready to go to work! And can be ordered to work with your 10", 10.5", or 10.7" clutch component sizes, equipped with either 1/2", 9/16", or 5'8" size flywheel studs. Also choose your stand count: 6, 8, or 9 stand. And your disk count: 2, 3, 4, 5, or 6 and you're all set... Save more, Race more, Win more! GoNitrolink.com
Price: Only $325.00 + Shipping.
Please note: Multiple configurations available. Please call: (916) 425-1427 to purchase.
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD Crank Bolt - Short
This next item is sure to save you both time and money not having to buy new elsewhere! So lets offer this slightly Used RCD Crank Bolt - Short style that measures 1 1/4" long from the flange and has a 3/4" thread diameter. This one's in nice shape and works with your 1" size wrench. And is responsible for attaching your crank hub to your crankshaft. At this price, you can't afford not to carry a spare... Order one today!
We offer a complete line of all Automan products!
Billet Clutch Feeler Gauges
"Nitrolink" offers quality specialty pit tools made to last... And these Billet Clutch Feeler Gauges are definitely one of the nicest sets on the market! And the great news is you can hand select the exact sizes you need instead of buying a complete set that comes with several sizes you'll never use. How cool is that! Each one comes complete with a durable stainless steel blade that measures 10 3/4" long that's perfect for job. The hex shaped handle measures 1" long, is stamped with the correct size, offers a comfortable grip and designed to hold the blade securely in place while in use. Blades can be changed out quickly if damage occurs and can be purchased separately if they need to be replaced down the road. Available in .035, .040, .045, .050, .055, .060, .065, or .070 blade sizes. Another quality product to match your quality race team!
Price: $49.95 each
Extra Deep Clutch / Head Stud Nut Socket
Cool racing components taken to the next level... "Nitrolink" offers hard to find specialty pit tools like this one to all our valued customers to help make certain jobs easier and more efficient! So, lets offer this brand new Extra Deep Clutch / Head Stud Nut Socket that eliminates several problems at once by itself...
1. Completely does away with using an extension when re-torquing your head stud nuts delivering a more precise torque spec.
2. It extends past your rocker stands, shafts, etc; when removing or re-torquing your head stud nuts.
3. Extended length allows you to re-torque clutch stand nuts quickly and easily with the bellhousing on.
4. It extends past the bellhousing just enough to prevent from loosing it while re-torquing clutch stand nuts, doing away with having to use an extension.
This high quality tool is made to last from heat treated steel and measures 7" in length, to fit your 1/2" drive torque wrench, breaker bar, etc. And can be ordered in either 11/16" or 13/16" sizes to fit your 12 point nuts. Not intended for use with air or battery impact guns. Order one right here today... And it's on the way!
Price
$99.95 – $119.95Price range: $99.95 through $119.95
Total
$99.95 – $119.95Price range: $99.95 through $119.95
Clutch Pack Line-Up Tool
Lightweight aluminum and ready to be pressed into service, this Clutch Pack Line-Up Tool is machined to the highest quality and anodized black for quick easy clean up. And designed to fit like a glove when it comes to lining up all your clutch disks to accept your input shaft or transmission. They can be ordered in 3 sizes, 1 3/8", 1 3/4", or 1 7/8" 10 spline, to work with either the large or small size pilot bearing. One more quality race tool to match your quality race team!
