We offer a complete line of all Taylor Motorsports Products!
Taylor Supercharger Restraint
If you're looking for unmatched quality that's second to none when it comes to Blower Restraints, then take a look at one of these Taylor Supercharger Restraint set-up's designed to fit any 6-71 to 14-71 Supercharger on the market. Available in either SFI 14.2 or SFI 14.3 spec, these blower bags are made of kevlar inside with a nomex outside. Injector straps, top blower restraint plate with straps, bottom manifold plate, 4 header brackets, 1 bell housing bracket, and 5 bracket pins, are also included to wrap up this very special package. Custom made for Nostalgia Top Fuel or Nostalgia Funny Cars running a 6-71 Blower, all the way up to Top Fuel Dragsters and Nitro Funny Cars running the 14-71 size. Quality and craftsmanship right here, so come and get it!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Taylor Motorsports Products!
Taylor Transmission Blanket
If you've been shopping around for this next item, then keep in mind a proper fit is key to a long lasting component that will provide years of service if maintained properly... This Taylor Transmission Blanket is quality craftsmanship at it's finest! It's durable construction, both inside and out are sure to meet all you're expectations. It's NHRA "tech friendly" with SFI 4.1 tags and can be ordered to fit all Lenco CS-1, or CS-2, (2, 3, 4 or 5 speed) transmissions. As well as B&J 2 speed, or big boy 3 speed transmissions. All are equipped with handy grip handles on each end for easy transmission installation or removal in between rounds. And can be ordered in either an oil repellent nylon or upgraded light weight kevlar outer shell... One more quality product, for your quality race team!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
We offer a complete line of all Taylor Motorsports Products!
Taylor Engine Diapers
For the best fit and lightest on the market, choose Taylor Engine Diapers to get the job done right the first time! These lower engine restraints meet or exceed SFI 7.1 specs and are custom made to fit your engine tightly. Unlike some of the "one size fits all" units that are offered elsewhere, these were designed to install easily or be removed quickly. And are equipped with removable absorption liners that can be replaced in a flash. Order yours today with either an oil repellent nylon, or upgraded light weight kevlar outer shell... Then start loading up for the next race!!!
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
TAK Titanium Header Brackets
GoNitrolink.com for both racing products and customer service taken to the next level! And if you're looking for some state of the art TAK Titanium Header Brackets that will perform on the racetrack as well as they look, then your shopping in the right place! These are slightly used, made of light weight titanium and profiled like no other set on the market. They install easily on your header studs on your cylinder heads and work in conjunction with your blower restraint set-up. They're sold separately and if you need the exact size quick release pins that go with these brackets, we can do that as well! Order both quickly and easily right here!
Price: Only $79.00 each.
Carbon Fiber Engine Containment Diaper
State of the art nitro & alcohol racing components are what we do best! And when it comes to one of the nicest buckets on the market, check out this brand new Carbon Fiber Engine Containment Diaper that's ready to offer a quicker, cleaner option than the standard fabric style diaper during removal & installation in between rounds. It's light weight and can be ordered to work with either the TFX or BAE/KB 426 Hemi aluminum blocks. And this one, unlike the other carbon fiber bucket on the market comes outfitted with light weight titanium side plates to help offer extra added protection in the event of connecting rod failure. Also included is a set of 4 upgraded kevlar mounting straps that can be ordered with your choice of either the header mount style (pictured) or chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags. And a set of 2 side absorbent pads are also included as well. Please specify your brand of oil pump, wet or dry sump and pan measurements when ordering... The coolest place on the planet for Carbon Fiber Drag Racing Components! GoNitrolink.com
Please note: Custom made to your exact specifications. Please call: (916) 425-1427 to order.
Price
$35.50 – $88.00Price range: $35.50 through $88.00
Total
$35.50 – $88.00Price range: $35.50 through $88.00
We offer a complete line of all Taylor Motorsports Products!
Absorbent Diaper Liners
"Nitrolink" is you're one stop shop for consumables as well... So, lets offer these handy Absorbent Diaper Liners available in 2 sizes, for Funny Cars or Dragsters. They come equipped with velcro strips at the top for easy installation or removal on both sides of the diaper. They're sold by the pair and work great with the small absorbent pillow (sold separately) that fits on the bottom of the diaper for a complete package. Don't risk being shut off at the line because of a couple small drips... These could possibly help!
Choose size needed in the "options" menu below.
Absorbent Pillow price includes 1 total.
Header Bracket Pins
And if we offer the super trick titanium header brackets here at gonitrolink.com then we better off the brand new stainless steel Header Bracket Pins to go with them, right! This is the exact size needed to work with the TAK titanium header brackets. They're precision made, sold separately and ready to hold your restraint straps in place... And look mighty fine doing it!
Nomex F/C - Altered Body Gasket
Attention in the pits!!! Funny Cars & Altereds to the lanes please! And that brings us to this next item specifically designed with you in mind... This Nomex F/C - Altered Body Gasket rides right on top of your bell housing shield and was designed to close up the gap between the shield and the fire wall. This nomex padded panel measures 4" x 24" total and is easily attached with velcro. Install one today, drop that body and send it!!!
Price
$190.00 Original price was: $190.00.$150.00Current price is: $150.00.
Total
$190.00 Original price was: $190.00.$150.00Current price is: $150.00.
Fire Bottle Actuator
It never hurts to carry around a few items you never think you'll ever need! And now that you've seen this brand new Fire Bottle Actuator right here... Well you know the rest! This one's from DJ Safety and equipped with a billet aluminum actuator arm. It's light weight, installs quickly and takes up very little space in your trailer while it waits to be pressed into service. GoNitrolink.com for all your hard to find spare items, so you're locked & loaded for race day!
Taylor Blower Bag & Restraint
Outfit your ride with this upgraded Taylor Blower Bag & Restraint set-up that's up for grabs today!!! Install or remove it easily on your Nostalgia Nitro Funny Car or Top Fuel Dragster, Blown Alcohol Altered, Supercharged Gas Dragster, Drag Boat, Tractor Puller and so on...
This one's equipped with current cert tags, is in excellent shape and can work with many of the different brands of 6-71 Superchargers on the market. It's the upgraded Top Fuel model that meets the highest SFI 14.3 spec for Blower Restraints. Or, if you're running an alcohol car that requires the lower grade 14.2 Blower Restraint set-up, then you're in luck! Because this one will pass tech for you as well, no problem. The nomex cover and all straps are in nice shape with normal minimal wear. Top Plate is slightly used, in nice condition and free of any stress cracks or damage. And measures the standard 20 1/8" long by 10 5/8" wide. With the Blower opening measuring 10" long by 4 1/2" wide. PLEASE NOTE: Includes everything in the photos. Header Brackets and Pins are not included. So here's your chance to replace that crispy worn out Blower Bag on your race car... And save your team several hundred bucks at the same time by ordering everything right here!
Brand new this exact set-up will run you right at $1,850 bucks without the brackets & pins! But don't even think of spending that much when you can pick this one up right here for a fraction of the cost of new... Quality racing components + Unmatched customer service = GoNitrolink.com
