Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Starter
Customer service taken to the next level... And here at "Nitrolink" it's all about offering our valued customers different options. And that brings us to this nice Used Blower Starter that also offers several new components included at one great price! The motor itself, is the same popular common style used on the more expensive brand starters out there, offering the same amount of torque, etc. It was recently reconditioned and loaded with brand new brushes. Then outfitted with a brand new billet starter cage, handle, wheel, solenoid and switch to offer all racers on a budget a more affordable alternative. Order yours quickly and easily right here on our website, 24/7!
Price: $1995.00 (Please call for availability.)
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak 500 PSI Remote Pressure Transducer
This slightly used Racepak 500 PSI Remote Pressure Transducer works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It works in conjunction with your sensor cable that connects to your analog box. And is responsible for monitoring fuel and oil pressure up to 500 PSI. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Nitrolink Racing Components carries a select variety of hard to find hardware that's specific to the needs of all our valued racing customers. We offer both titanium and steel hardware and limit our selection to key items not found at your local hardware store. Here's an example!
Jet Nuts #10 -32 Fine Thread - Pack of 10
These Jet Nuts #10 -32 Fine Thread - Pack of 10 are coated steel to fit your 1/4" size wrench. This is one of the most popular sizes found on most race cars, so it's able to be used in a wide variety of applications. This style of self locking nut works better than a standard nylock nut under high heat / high vibration racing conditions. And offers a much lower profile than standard nuts allowing you to use a reduced size wrench in tight areas. Now you know exactly where to go for hard to find racing hardware! GoNitrolink.com
AN Fitting Cap & Plug Kit
This next item offered here on GoNitrolink.com has only one job to do and that is to help keep both your fuel and oil system clean and in the condition needed to assure maximum performance on the race track! This brand new plastic AN Fitting Cap & Plug Kit offers all the popular sizes needed to keep all your open lines and fittings covered to eliminate any dust, dirt, metal shavings, or debris from ruining your weekend. It also helps eliminate those annoying drips in your pit area, or on your trailer or race shop floor. This handy assortment includes both caps and plugs in -3, -4, -5, -6, -8, -10, -12 and -16 sizes. And it comes complete with a metal carrying case that stores away easily in your race trailer or race shop and keeps all sizes organized neatly. So, if you pay close attention to all the details when it comes to streamlining your racing operation, then this kit is definitely for you!
We carry a complete line of all Dan Olson Products!
Header Covers
"Nitrolink" offers several different styles of Header Covers to choose from, to help keep unwanted debris out of those pipes while your towing back to your pit area! This brand new set works exceptionally well with your Dan Olson or similar style headers and are made of durable, light weight aluminum so they clean up easily. And they're polished to a brilliant shine so they deliver that clean professional finished look your race team is known for! The standard size offered here is for the 2 1/2" size pipe diameter with a 40° angle. However, custom sizes are also available at a slightly higher rate. Order your set today on our website, then check one more thing off your list!
Sold as a set.
Fat Head 426 Hemi Exhaust Header Gaskets
We offer a large selection of all the popular hi performance racing gaskets including cylinder head, oil pan, valve cover, blower and injector gaskets, as well as these brand new Fat Head 426 Hemi Exhaust Header Gaskets to fit all the current fathead exhaust bolt patterns and ports. These are the re-usable pro embossed style, made by SCE and designed to be one of the lightest copper gaskets on the market. And are very popular with many of the NHRA A/fuel, Top Alcohol Funny Car and Pro Mod teams. They measure .043" thickness, are sold as a pair and ready to help direct that hot exhaust out the end of the pipes where it belongs!
Price
$93.50 – $135.95Price range: $93.50 through $135.95
Total
$93.50 – $135.95Price range: $93.50 through $135.95
We offer a complete line of all Racepak products!
Racepak Weld-In Header Bungs
Check out this complete set of (8) brand new Racepak Weld-In Header Bungs that works with your standard 1/4" EGT probes. They weld separately to each of your header pipes and work in conjunction with your Racepak Nuts & Ferrules to securely hold your EGT Probes in place. The road to the winners circle may be shorter than you think! GoNitrolink.com
Choose either stainless or regular steel in the options menu below.
We offer a complete line of all Racepak products!
Here's one more example of how you can race smart by taking full advantage of monitoring one more area of valuable on-track race data!
Racepak Front Wheel Speed Sensor
This brand new Racepak Front Wheel Speed Sensor works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. This 3/8" fine thread sensor is triggered by steel and is designed to monitor front wheel speed or drive shaft RPM. It plugs directly into your input A box using your sensor cable. And is responsible for sending data to the input A box, then to the data logger. The road to the winners circle may be shorter than you think! GoNitrolink.com
Price
$8.40 – $18.30Price range: $8.40 through $18.30
Total
$8.40 – $18.30Price range: $8.40 through $18.30
Rocker Adjuster Nuts
...And if we offer the adjusters here on GoNitrolink.com then we better offer these brand new Rocker Adjuster Nuts to go with them, right! This popular item comes in your choice of either 3/8" or 7/16" size and works in conjunction with your rocker adjusters on your Stage 5, BAE, Manton, Reid, Arrow, Cluff, etc; rocker arms. They're top quality precision machined, made in the U.S. and ready to help keep your rocker arms properly adjusted so you can put down a number!
Choose either 4 total, or 8 total in the "options" menu below.
Price
$67.50 – $171.50Price range: $67.50 through $171.50
Total
$67.50 – $171.50Price range: $67.50 through $171.50
Hemi Rocker Adjusters
Here's another one of those small items that we don't want to see keep you out of the winners circle because you didn't have spares... So, let's keep that from happening with these brand new Hemi Rocker Adjusters that are available in either the pressure feed oiler (with side holes), non-oiler (with hole), or standard solid style, in your choice of either 3/8" -24, with a 5/16" ball size or 7/16" -20, with a 3/8" ball size. All are precision machined and ready to work with your Stage 5, BAE, Manton, Reid, Arrow, Cluff, etc; rocker arms. And if you're also looking for the correct nuts that fit perfectly on these adjusters, just scroll down this page and your there! Quality racing components and customer service taken to the next level! GoNitrolink.com
Please note: Custom sizes also available. Please call: (916) 425-1427 to order.
Choose size & either 4 total, or 8 total in the "options" menu below.
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Alan Johnson AL Valve
All nitro cars to the lanes please!!! And if you're running an AJPE slide valve, then you're going to want to take a look at this very nice Used Alan Johnson AL Valve to complete the package! This one's in nice shape, free of any damage and regulates fuel pressure, or isolates your fuel system and acts similar to an accelerator pump. It's equipped with -12 fittings on the side and -3 fittings on the t-fitting at the bottom. It's used in conjunction with your A.J. slide valve and is fully adjustable to accommodate different fuel pressure ranges. Save money, save time! GoNitrolink.com
Price
$190.00 Original price was: $190.00.$150.00Current price is: $150.00.
Total
$190.00 Original price was: $190.00.$150.00Current price is: $150.00.
Fire Bottle Actuator
It never hurts to carry around a few items you never think you'll ever need! And now that you've seen this brand new Fire Bottle Actuator right here... Well you know the rest! This one's from DJ Safety and equipped with a billet aluminum actuator arm. It's light weight, installs quickly and takes up very little space in your trailer while it waits to be pressed into service. GoNitrolink.com for all your hard to find spare items, so you're locked & loaded for race day!
