We offer a complete line of all Pit Pal products!
Pit Bike Chock
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And when it comes to helping avoid costly damage during transport, then a brand new Pit Bike Chock just like this one is ready to do the job! It's made of durable aluminum and helps secure your pit bike to your trailer floor, or truck bed. It mounts easily and holds up to a 15" diameter / 5" width tire that fits into the cradle. It works in conjunction with your ratchet straps, to anchor the bike to the chock during transport. Chock measures 8.25"W or 20"W including the back cross bar. Inside cradle measures 5 1/16"W total. With outside measuring 19"D including the back cross bar... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Tie Downs not included.
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts and accessories available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks from buying new! Check this item out...
Used Racepak 400 PSI Transducer
This slightly Used Racepak 400 PSI Transducer works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It fits in your analog box with your other transducers and is responsible for monitoring fuel pressure and nozzle pressure, or any other function up to 400 PSI. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts and accessories available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks from buying new! Check this item out...
Used Racepak 300 PSI Transducer
This slightly Used Racepak 300 PSI Transducer works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It fits in your analog box with your other transducers and is responsible for monitoring oil and fuel pressure, or any other function up to 300 PSI. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Racepak 500 PSI Remote Pressure Transducer
This slightly used Racepak 500 PSI Remote Pressure Transducer works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It works in conjunction with your sensor cable that connects to your analog box. And is responsible for monitoring fuel and oil pressure up to 500 PSI. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Cylinder Head Stands
If you're looking to streamline your racing operation, then paying close attention to even the small task challenges usually translates into a productive weekend on the race track! And this handy set of brand new Cylinder Head Stands can certainly help in that department! No bolts, clamps or adapters required with this 2 piece set. Their light weight aluminum construction and slip resistant neoprene covered rails makes this set perfect for use in your pit area. And they're compact size allows them to stow away practically anywhere in your race trailer or back at the shop. Just another "Nitrolink" specialty tool to help keep things running smooth on your team!
We offer a complete line of all Pit Pal products!
Floor Jack Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's eliminate the possibility of costly damage to your race car during transport with a brand new Floor Jack Holder like this one to help keep yours safe, secure and out of the way! This one's made of durable .090 tig welded aluminum and equipped with a fully enclosed back and bottom. It measures 17.5"W x 24.25"H x 5.5"D and ready to be pressed into service right out of the box... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Floor Jack not included.
Price
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Total
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
New 11mm - 57T - Quick Change Pulley
If you're looking for a New 11mm - 57T - Quick Change Pulley offered at a discounted price, then it's you're lucky day! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Racepak Steering Shaft Sensor
This slightly Used Racepak Steering Shaft Sensor works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It connects to your 3 pin sensor cable then to your 5V-Out transducer and assists in providing data to your computer to determine if the race car is being over driven on the race track by measuring steering wheel travel. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Racepak Flow Meters, EGT's, Cables, Pressure & Temp Sensors, Analog Boxes & Much More!!!
We have a large supply of both new and slightly used Racepak parts available for your Pro 2, Pro 1B, Pro 1A, or SC-1000 on-board computer systems. And the great news is, everything listed here on our website is sure to save you quite a few bucks not having to buy new elsewhere! Check this item out...
Used Racepak Linear / Travel Sensor
This slightly Used Racepak Linear/Travel Sensor works with the popular Pro 2, Pro 1B, or Pro 1A data loggers. It the smaller 1" style and plugs directly into your sensor cable, then into your 5V out transducer that fits in your analog box. It measures travel and responsible for helping monitor slide valve travel for your fuel system. These items for the earlier style Racepak systems are getting tougher to come by, so order while you can because once they're gone, they're gone for good!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Blower / Injector Spacer
Slightly used, in great shape and ready to hopefully join you in the winners circle is this
Used Blower / Injector Spacer that installs quickly in between your blower case and injector. This ones made of light weight aluminum and equipped with 2 air bleed fittings on the front edge for fine tuning your idle setting. It measures 1" tall, o-ring ready on both sides and mounting holes measure 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. One more item off your check list that's in stock and ready to ship!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Injector Spacer
Order right here and save both time and money on this nice Used Blower Injector Spacer that installs quickly in between your blower case and injector. This one's made of light weight aluminum and measures 1" tall, is o-ring ready on both sides with mounting holes measuring 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. Save GoNitrolink.com to your favorites and check back often because there's more quality components on the way!
Used 426 Hemi "Core" Camshafts
To help keep all our valued customers on a budget at the racetrack and going rounds, we offer a limited supply of Used 426 Hemi "Core" Camshafts from different manufactures to save you a few bucks not having to buy new elsewhere! Several cam companies offer the service to re-grind your camshaft to your exact specifications for a reasonable charge. So, why not take advantage, get the cam specs you need and have money left over to buy more parts! Helping racers racing budgets go further! GoNitrolink.com
Sold Separately.
