We offer a complete line of all Automan products!
Dual Magneto Handcuff Kit
Check out the quality and craftsmanship on this Dual Magneto Handcuff Kit for your MSD Pro Mag 44's. These are brand new and made of light weight billet aluminum and clamp securely to both magneto housings for a positive lock. The adjustable rods and heat treated rod ends offer yet one more safe-guard to keep both mags secure by working with your existing mag base clamps. There durable, light weight and easy to install. Ordering is simple... Just click, pay and they're on the way!
Price
$179.99 – $239.99Price range: $179.99 through $239.99
Total
$179.99 – $239.99Price range: $179.99 through $239.99
"Nitrolink" offers a complete line of all Enderle Products!
Enderle SBC Front Cover
All you Small Block Chevy racers out there on a budget are sure to appreciate this brand new Enderle SBC Front Cover when it comes to performance and a little nostalgic style! It's made of cast aluminum with built in ears to block off the water pump ports for a finished look. Or if you choose, simply remove them all together. The large crank opening will accommodate a small block crank with a big block snout if desired. Front seal sold separately. Add one of these to your shopping cart right here... Then get your tools ready!
Choose cast aluminum or polished finish in the "options" menu below.
Price
$179.99 – $259.99Price range: $179.99 through $259.99
Total
$179.99 – $259.99Price range: $179.99 through $259.99
"Nitrolink" offers a complete line of all Enderle Products!
Enderle BBC Front Cover
Now here's an item that all you Big Block Chevy racers out there on a budget can definitely get some use out of! This brand new Enderle BBC Front Cover offers both performance and nostalgic style! It's made of cast aluminum with built in ears to block off the water pump ports for a finished look. Or if you choose, simply remove them all together. This cover uses a standard BBC front seal (sold separately). Add one of these to your shopping cart right here... A couple clicks after that and it's on it's way!
Choose cast aluminum or polished finish in the "options" menu below.
Portable Air Tank - 5 Gallon
It's Portable... It's Lightweight... And it's Polished for that awesome finished look! This brand new aluminum Portable Air Tank - 5 Gallon size checks all the boxes when you're looking for just the basics without compromising quality. This one's the larger style, with tank dimensions measuring approx 15" x 13" total. It's equipped with a 3 foot hose, tire ball chuck and standard fill valve to get the job done quick and easy. It's compact size makes it perfect for use in the lanes, ready to provide that last minute pressure adjustment. Or, it stows away nicely out of the way at your race shop or in your trailer. Maximum pressure is 125 psi. And includes everything you see in the photo... The coolest place on the planet for all your support equipment needs! GoNitrolink.com
We offer a complete line of all Pit Pal products!
Pro Spark Plug Caddy
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, take a look at this brand new Pro Spark Plug Caddy that's slightly larger and ready for 4 qualifying runs... And 4 elimination rounds! It holds a total of 64 standard or peanut size plugs, made of durable aluminum and equipped with a handle on both sides. It measures: 12"W x 6"H x 10 1/2"D and provides an easy way to keep spark plugs organized for Crew Chiefs to read. Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Spark plugs sold separately.
We offer a complete line of all Pit Pal products!
Pit Bike Chock
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! And when it comes to helping avoid costly damage during transport, then a brand new Pit Bike Chock just like this one is ready to do the job! It's made of durable aluminum and helps secure your pit bike to your trailer floor, or truck bed. It mounts easily and holds up to a 15" diameter / 5" width tire that fits into the cradle. It works in conjunction with your ratchet straps, to anchor the bike to the chock during transport. Chock measures 8.25"W or 20"W including the back cross bar. Inside cradle measures 5 1/16"W total. With outside measuring 19"D including the back cross bar... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Tie Downs not included.
Cylinder Head Stands
If you're looking to streamline your racing operation, then paying close attention to even the small task challenges usually translates into a productive weekend on the race track! And this handy set of brand new Cylinder Head Stands can certainly help in that department! No bolts, clamps or adapters required with this 2 piece set. Their light weight aluminum construction and slip resistant neoprene covered rails makes this set perfect for use in your pit area. And they're compact size allows them to stow away practically anywhere in your race trailer or back at the shop. Just another "Nitrolink" specialty tool to help keep things running smooth on your team!
We offer a complete line of all Pit Pal products!
Floor Jack Holder
Nitrolink is excited to offer your race team top quality Pit Pal race trailer accessories for the exact same price as the manufacturer! So, let's eliminate the possibility of costly damage to your race car during transport with a brand new Floor Jack Holder like this one to help keep yours safe, secure and out of the way! This one's made of durable .090 tig welded aluminum and equipped with a fully enclosed back and bottom. It measures 17.5"W x 24.25"H x 5.5"D and ready to be pressed into service right out of the box... Shop here 24/7 for all your Pit Pal needs! GoNitrolink.com
Floor Jack not included.
Price
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Total
$390.00 Original price was: $390.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
New 11mm - 57T - Quick Change Pulley
If you're looking for a New 11mm - 57T - Quick Change Pulley offered at a discounted price, then it's you're lucky day! This one's the GT, center flange model, that works with your quick change style crank hub and nut. It's made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor and measures the standard 3 1/2" wide. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, or Tractor Puller and DROP THE HAMMER!!!
Price
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Total
$375.00 Original price was: $375.00.$195.00Current price is: $195.00.
Another BRAND NEW item... Without the brand new price!!!
Taylor Blower Manifold Restraint
If you're running an AJ set-back hemi blower manifold and are looking for a brand new Taylor Blower Manifold Restraint then lets save you some money right here! This one's made of silver kevlar and nomex material and designed to work with the newer style round burst panel. It's been sitting around the race shop as a spare, but was never used. It's equipped with SFI 14.5 tags that are expired, however this item is guaranteed to re-cert or your money back. It has also been priced accordingly so buy here today and save!
Another
"NITROLINK" $$$ SAVER DEAL!!!
Do you like this item? And can you put it to work?
Just click the "make an offer" button below to send us your reasonable offer!
And if it make sense, then this item is yours!!!
Used Blower / Injector Spacer
Slightly used, in great shape and ready to hopefully join you in the winners circle is this
Used Blower / Injector Spacer that installs quickly in between your blower case and injector. This ones made of light weight aluminum and equipped with 2 air bleed fittings on the front edge for fine tuning your idle setting. It measures 1" tall, o-ring ready on both sides and mounting holes measure 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. One more item off your check list that's in stock and ready to ship!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Blower Injector Spacer
Order right here and save both time and money on this nice Used Blower Injector Spacer that installs quickly in between your blower case and injector. This one's made of light weight aluminum and measures 1" tall, is o-ring ready on both sides with mounting holes measuring 4 1/2" x 13 1/4" center to center, with a 4 1/2" x 10 3/8" opening. Save GoNitrolink.com to your favorites and check back often because there's more quality components on the way!
