Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
TFX '92 Complete 426 Hemi Gear Drive
Take a look at this slightly used TFX '92 Complete 426 Hemi Gear Drive that works with your TFX '92 blocks only... It's the 48° raised cam style, is in nice shape and includes the front cover, upgraded titanium crank hub, crank seal & housing, cam gear, cam hub, idler gear kit, crank gear, degree wheel, crank bolt and hardware. This set-up could work well on your Top Fuel or Nostalgia Dragster, Nitro or Alcohol Funny Car, AA/Fuel Altered, Pro Mod, Drag Boat, Tractor Puller and so on... The billet aluminum front cover is in nice shape with only minor nicks and scratches from normal minimal use. And works in conjunction with your BAE or AFT fuel pump extension (sold separately). The steel cam gear is the 11 hole style, also in nice shape and free of any damage with all teeth looking good to go. The crank gear included is dual keyed and the idler gear also gets the thumbs up. The cam hub is equipped with a 1/2" size hex and the RCD dual keyed crank hub and degree wheel are ready to install using the standard size crank bolt that's also included. This set-up can be used on both supercharged or un-blown applications. However, it will not adapt to your application if you're running a BAE or Keith Black block.
Why Buy New??? Expect to pay close to $1,800 Bucks for all these components buying new elsewhere. But don't even think about spending that much when you can pick this one up right here for a fraction of the cost... And have hundreds of dollars left over for other weekend expenses! This unit is available immediately and ready to ship out today...
Quality pre-owned & new racing components 24/7 right here! GoNitrolink.com
Another "Racers Discount" brand new product... Without the brand new price!!!
New Boninfante 10.5" Clutch Disks
At the moment... We have a good, limited supply of New Boninfante 10.5" Clutch Disks in stock and ready to ship!!! These have a .390 thickness with the popular 1 3/4", 10 spline hub. And the best news is, we can get these headed your way without all the down time and hassle! And if you need floaters to go with 'em, we can do that too!
When you think Nitro & Alcohol consumables... Think GoNitrolink.com
Priced to move at: Only $195.00 each
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another "Racers Discount" brand new product... Without the brand new price!!!
New Custom Floater 10.5" Clutch Floaters
The supply is limited, so take advantage while they last!!! These New Custom Floater 10.5" Clutch Floaters are in stock and ready to ship! These have a .350" thickness and are the 6 stand, 6 cutter (1/2" wide) large stand style. And the best news is, we can get these headed your way without all the down time and hassle! And if you need 10.5" clutch disks to go with 'em, we can do that too!
Save more, Race more, Win more! GoNitrolink.com
Priced to move at: Only $75.00 each
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
MSD Pro Mag 44 Points Box & Coil Kit
Top of the line quality components, at a money saving price is exactly what you'll find right here with this slightly used MSD Pro Mag 44 Points Box & Coil Kit that's sure to help you save both time and money ordering everything all in one place! This kit features a standard MSD #81453 Points Box that's the non-rev style, that connects quickly to your MSD Pro Mag 44 Magneto using a 4 pin Deutsch connector that's already installed. It's black in color, so it matches the MSD #81423 Pro Mag 44 Coil that's also included, for that awesome stealth look! Plus, all the mounting hardware, anti-vibration mounts, etc; are already installed on the funny car style aluminum mounting plate that's also included with the complete package. All components will be tested prior to shipping, so you know your money was well spent here. And get ready to save over $1,400 Buck not having to buy new elsewhere!
Racers helping Racers do what they do best... For Less! GoNitrolink.com
Slightly Used
Jesel 426 Hemi Roller Lifters
Been looking for a nice slightly used set of top of the line Jesel 426 Hemi Roller Lifters without having to spend $3,700 Bucks for a new set? Well then you're definitely looking in the right place here!!! This complete set of (8) pair is the larger 1 1/16" lifter bore size. And can work with your TFX, BAE, or Keith Black, cast or billet block. They're equipped with a .37" diameter pin, with the rollers measuring .56" wide. And a 2" spread. All rollers are in nice used condition, with lifter outside surfaces showing normal minimal wear. So if you need a set, here they are... If you have a set, then don't hit the road without spares...
Hi-Performance Products for Less, is what we do Best! GoNitrolink.com
Used Carbon Fiber Bucket
Attention in the Pits!!! Funny Cars & Altereds to the lanes please... And if you're running a BAE Block, with a Dry Sump Oil Pump then get ready to save BIG TIME! Check out this slightly Used Carbon Fiber Bucket that could offer a quicker, cleaner option than the standard fabric style diaper when it comes to removal & installation in between rounds. This one's light weight and works with your BAE 426 Hemi aluminum block. It's in great shape, super clean and was recently certed, and also outfitted with a brand new inside liner to make this deal that much better! And it also comes complete with a set of 4 upgraded kevlar chassis mount style straps. Both the bucket and straps are NHRA "tech friendly" with current SFI 7.1 tags, so you know your money was well spent here. And a set of 2 side absorbent pads are also included as well. Brand new, we sell these for right at $1500 bucks, so don't delay... Because just like on the race track, reaction time matters!
Racers helping Racers do what they do best... For Less! GoNitrolink.com
Slightly Used
Sander Nostalgia Top Fuel Rear Racing Wheels
They're in stock and ready to ship out today!!! So, lets get this awesome set of Sander Nostalgia Top Fuel Rear Racing Wheels headed your way to help you save big time not having to buy new elsewhere!!! This slightly used set, equipped with SFI 15.3 tags is the popular 16x12 size that many of the Nostalgia Top Fuel Dragsters are running. They have a
5 on 5 bolt pattern, and a 4" offset/backspace. And are the double beadlock style that utilize 18 bolts total on the outside, as well as the inside of the beadlock rings. The polished finish on both wheels is in great shape with a nice brilliant shine. The centers are also in very good condition, with the stud holes being free of any visible cracks or oblong. And the inner and outer beadlock rings also get the thumbs up. Both wheels have never been bent up, welded on, or repaired. And as usual, you will find with this set not being brand new, your common normal wear with slight nicks & scratches throughout. And to make the deal that much better, we'll also include a nice used set of M&H 13.00-16 Racing Slicks as well. Brand new, a set identical to these will run you right at $4400 Bucks without the tires!
Supercharged Savings 24/7 right here... GoNitrolink.com
Priced to move at: Only $2995.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
IN STOCK & READY TO SHIP!!!
AJPE 426 Hemi Billet Block
The coolest place on the planet to buy all your top of the line racing components like this slightly used, late model AJPE 426 Hemi Billet Block is right here at GoNitrolink.com...
And this one's been freshened up and has not been run since... Line bore, cam journals and main caps were all gone over, so you know your money was well spent here! And it features a standard deck, standard mains, 48 degree raised cam. And loaded with 4.187 sleeves, has a 1 1/16" lifter bore size, a standard 54mm cam journal size and ready to accept you're 9/16" size head studs (not included). It's been professionally repaired (see photos) and has been machined down .015 off the deck surface, with all the sleeves having over-sized registers. Plus, the best news is this one won't cost you $10,000 bucks, plus the wait time to buy a new one elsewhere! This block is in stock, ready to ship... And definitely ready to go to work!!!
Priced to move at Only: $5595. + shipping.
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Tray in photos not included.
AJPE Billet 392 Hemi Heads
Serviced and ready to run!!! Is exactly what you'll find when this "complete" set of
AJPE Billet 392 Hemi Heads show up on your doorstep! This slightly used set is in great shape and free of any damage or repairs. And ready to work with your 6 bolt style intake manifold. They're loaded with a slightly used set of beadlock groove Manley 2.125" diameter titanium intakes that measure 5.350" long (5/16" stem). And a set of square groove Manley inconel 1.870" exhaust valves that measure 5.260" long (11/32" stem) with Manley titanium 10° locks & retainers. Plus, a slightly used set of PSI Triple Valve Springs are also included as well. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And we'll include a complete set of header & intake manifold studs to make this hard to find package even better! And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The Coolest Race Parts on the Planet + Unmatched Customer Service = GoNitrolink.com
Priced to move at: Only $3995.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
BAE 426 Hemi Fuel Heads
Check out this "complete" set of BAE 426 Hemi Fuel Heads ready for the next Funny Car Chaos event, or your Nostalgia Top Fuel Dragster, Nostalgia Nitro Funny Car, Blown Fuel Altered, Nostalgia A/Fuel, 7.0 Pro, Drag Boat, Tractor Puller and so on. This slightly used set is in great shape and free of any damage or repairs. And works with your standard deck Keith Black, BAE, or TFX Rodeck cast or billet block, using your .100 tall fuel head style manifold. They're the 6 bolt, .100 tall style, loaded with a slightly used set of beadlock groove Manley 2.450 titanium intakes (11/16" stem). And Manley inconel 1.925 exhaust valves (3/8" stem) with Victory titanium retainers and the Manley lash lock system. Plus, a slightly used set of PAC Triple Valve Springs are also included as well. And we'll throw in a complete set of inner head studs, header studs and rocker stand studs to make this deal that much better! Rocker stand dowel pins are the standard 3/8" size and the exhaust flange pattern is also standard and will accommodate most any brand of Hemi fuel head style header, however will not interchange with headers off of fatheads. And as you probably know, your block must be equipped with head studs, not head bolts. And YOU CANNOT RUN WATER thru these heads. The intake ports are o-ring equipped and the cylinder head surfaces are incredibly smooth and in great shape. Combustion chambers have o-rings installed and have never been blown out or burned thru with chambers having very little normal minimal wear. All valve seats and valve guides are in great shape. And this set has provisions to run down nozzles if you choose. They're set up for dual (16 total) spark plugs. However, if your car is set up for 1 plug per cylinder (8 total) no problem... Just plug off 1 hole per cylinder and use your single plug valve covers. Please note: These BAE Fuel Heads are not the "Fatheads" like the A/Fuel Dragsters are running.
Brand new, a loaded set identical to these will set you back right at $10,000 Bucks! But not here... Not today! This set is available immediately and ready to ship out today...
The road to the winners circle may be shorter than you think! GoNitrolink.com
Priced to move at: Only $3895.00
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Another BRAND NEW item... Without the brand new price!!!
392 Hemi Alcohol Dragster Headers
Quality racing components taken to the next level right here at GoNitrolink.com!
And if you're in the market for a brand new set of 392 Hemi Alcohol Dragster Headers for your Alcohol Dragster, Blown Alcohol Altered, Drag Boat, etc; then look no further... This set was made by Shorty's and in excellent shape with a pipe diameter measuring
2 1/2" total, with the standard degree bend. They're set up to work with your AJPE 392 billet fuel heads and equipped with EGT bungs on the top, ready to accept your Racepak or other brand EGT probes (sold separately). Or, just cap them off if you're not running a computer. And check out the lightened reinforcement tube gussets for extra added strength to complete this very nice package! Order this set right here... And have money left over by not having to buy new elsewhere!
PLEASE NOTE: These headers will not adapt to your application if your running 426 fuel heads or fatheads.
Another BRAND NEW item... Without the brand new price!!!
Arias 392 Hemi Coated Nitro Pistons
Great News!!! Here's another brand new product, without the brand new price tag! This set of (10) brand new Arias 392 Hemi Coated Nitro Pistons are the 4.125 bore size and ready to accept your 1.094" pin size, with a 1.600 compression height. Ring groove sizes are as follows:
Top = .0745", Second = .0641", Oil ring = .1880" size. We have several sets available, so click on "buy now" and get ready to save hundreds right here... Quality Racing Components + Unmatched Customer Service = GoNitrolink.com
Other Compression Heights Available. Call: (916) 425-1427 for details.
