Used RCD Blower Snout & Coupler
If you prefer to run name brand components on your race car, then check out this
Used RCD Blower Snout & Coupler that's in great shape and sure to deliver the quality and craftsmanship you've come to expect! This one's the 6 bolt style that measures 6 1/4" long. It's in very nice shape with no damage or repairs. And the polished finish has a nice brilliant shine with only slight nicks and scratches from normal use. Coupler included is also in nice used shape with no visible spline damage, etc. Grab your hardware (not included) and install this one right out of the box! "Supercharged Savings" daily at GoNitrolink.com
Priced to move at: Only $325.00
Price
$99.95 – $155.95Price range: $99.95 through $155.95
Total
$99.95 – $155.95Price range: $99.95 through $155.95
"Nitrolink" offers a complete line of all Littlefield Products!
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Any Size - 1/2" Pitch HTD Blower Pulley
Choose Any Size - 1/2" Pitch HTD Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
Price
$107.95 – $223.95Price range: $107.95 through $223.95
Total
$107.95 – $223.95Price range: $107.95 through $223.95
"Nitrolink" offers a complete line of all Littlefield Products!
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Any Size - 13.9mm Blower Pulley
Choose Any Size - 13.9mm Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
Price
$116.95 – $238.95Price range: $116.95 through $238.95
Total
$116.95 – $238.95Price range: $116.95 through $238.95
"Nitrolink" offers a complete line of all Littlefield Products!
Any Size - 14mm GT Blower Pulley
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Choose Any Size - 14mm GT Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
Price
$116.95 – $238.95Price range: $116.95 through $238.95
Total
$116.95 – $238.95Price range: $116.95 through $238.95
"Nitrolink" offers a complete line of all Littlefield Products!
Any Size - 14mm STD Blower Pulley
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Choose Any size 14mm Standard Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
Price
$110.95 – $263.95Price range: $110.95 through $263.95
Total
$110.95 – $263.95Price range: $110.95 through $263.95
"Nitrolink" offers a complete line of all Littlefield Products!
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Any Size - 8mm GT Blower Pulley
Choose Any Size - 8mm GT Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
Price
$104.95 – $178.95Price range: $104.95 through $178.95
Total
$104.95 – $178.95Price range: $104.95 through $178.95
"Nitrolink" offers a complete line of all Littlefield Products!
Since the mid 70's, Littlefield Blowers has been recognized for being on the cutting-edge in the Supercharger Industry. And, if you're looking for unmatched quality and performance when it comes to Blower Pulleys, then here's your answer!
Any Size - 8mm STD Blower Pulley
Choose Any Size - 8mm STD Blower Pulley you need... And we'll handle the rest!!! All are made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulleys measures 3 1/2" wide and work with most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market.
Choose size needed in the "options" menu below.
Fowler F-11 Billet 6-71 Blower
Half off the price of new for a state of the art Supercharger is what you're looking at here, with this slightly used Fowler F-11 Billet 6-71 Blower that was just freshened up at the Blower Shop, with zero runs... Install this one right out of the box, then tow to the lanes! It's equipped with an upgraded billet case, along with quite a few extra's added in to make the deal that much better! Let's start with the upgraded 12 bolt billet blower snout that measures 3 13/16" long. The billet aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear and loaded with brand new teflon strips already installed. And brand new front seals are also included as well. Top opening measures 9 3/4" long x 4 15/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the popular small delta style front opening for optimum efficiency... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $10,000 bucks to make it happen!!! But not here... Not today! Get this one on the truck and headed your way with one phone call... Then figure out where to spend that extra $5,000 bucks you just saved right here by not buying new elsewhere! The road to the winners circle is shorter than you think! GoNitrolink
Priced to move at: Only $4995. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Fowler F-11 Cast 6-71 Blower
A top of the line racing component at better than half off the price of new!!! Is exactly what you'll find right here with this slightly used Fowler F-11 Cast 6-71 Blower that was just freshened up at the Blower Shop, with zero runs! This one's ready to be pressed into service right out of the box and equipped with quite a few extra's added in to make the deal that much better! Let's start with the 6 bolt billet blower snout that measures 3 13/16" long. The cast aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear, with brand new teflon strips already installed. And we'll also include a set of brand new gears and front seals as well. Top opening measures 7" long x 4 7/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the standard square opening... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $9,000 bucks to do it!!! But not here... Not today! This one's in stock and ready to ship with one phone call... Then figure out where to spend that extra $5,100 bucks you just saved right here by not buying new elsewhere! Save more, race more, win more! GoNitrolink.com
Priced to move at: Only $3895. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Lapping Plate Sand Paper Sheets
Keep that brand new Lapping Plate earning its keep with an extra supply of Lapping Plate Sand Paper Sheets specifically fitted for the plate itself. These sheets are equipped with the popular 60 grit surface needed, with an adhesive backing for a secure fit. Each sheet is sold separately and when used with the lapping plate, it's one of the most effective ways to help assure that your blower and manifold are working together for optimum performance! And we'll make it quick and easy to order yours right here... Job done!
Price
$439.95 – $598.95Price range: $439.95 through $598.95
Total
$439.95 – $598.95Price range: $439.95 through $598.95
"Nitrolink" offers a complete line of all Littlefield Products.
Littlefield Polished Blower Snouts
When it comes to blower components, it's not always a smart move to go with the least expensive brands available. Because on the race track, horsepower always finds the weakest parts, right! So lets offer top of the line quality at a fair price right here with these
Littlefield Polished Blower Snouts. Made of aircraft-grade billet aluminum and available in a variety of sizes sure to fit your specific application, these premium snouts are available in 3 7/8", 5 1/8", 6", 7" and 8 5/8" lengths. They're loaded with a double-ball bearing and equipped with premium oil seals. The shaft is made from 4100 heat-treated steel delivering one of the strongest and most reliable on the market. These high performance blower snouts have consistently proven themselves over the years that they can stand up to the most demanding racing conditions, then be ready for the next round!
Choose Snout Length needed in the "options" menu below.
BRAND NEW!!!
Magnesium Blower Snout
Light weight & hard to find are 2 words that best describe this brand new Magnesium Blower Snout that's perfect for all our weight conscious customers out there! And this one's sure to deliver the quality and craftsmanship you've come to expect right here! It's the light weight upgraded magnesium 6 bolt style, that measures 3.9" long. And is in excellent shape, has a nice brilliant shine and has never been down the race track. And it comes complete with a brand new Coupler, Gasket and Hardware..."Supercharged Savings" daily at GoNitrolink.com
