Used RCD Blower Snout & Coupler
If you prefer to run name brand components on your race car, then check out this
Used RCD Blower Snout & Coupler that's in great shape and sure to deliver the quality and craftsmanship you've come to expect! This one's the 6 bolt style that measures 6 1/4" long. It's in very nice shape with no damage or repairs. And the polished finish has a nice brilliant shine with only slight nicks and scratches from normal use. Coupler included is also in nice used shape with no visible spline damage, etc. Grab your hardware (not included) and install this one right out of the box! "Supercharged Savings" daily at GoNitrolink.com
Priced to move at: Only $325.00
Fowler F-11 Cast 6-71 Blower
A top of the line racing component at better than half off the price of new!!! Is exactly what you'll find right here with this slightly used Fowler F-11 Cast 6-71 Blower that was just freshened up at the Blower Shop, with zero runs! This one's ready to be pressed into service right out of the box and equipped with quite a few extra's added in to make the deal that much better! Let's start with the 6 bolt billet blower snout that measures 3 13/16" long. The cast aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear, with brand new teflon strips already installed. And we'll also include a set of brand new gears and front seals as well. Top opening measures 7" long x 4 7/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the standard square opening... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $9,000 bucks to do it!!! But not here... Not today! This one's in stock and ready to ship with one phone call... Then figure out where to spend that extra $5,100 bucks you just saved right here by not buying new elsewhere! Save more, race more, win more! GoNitrolink.com
Priced to move at: Only $3895. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Fowler F-11 Billet 6-71 Blower
Half off the price of new for a state of the art Supercharger is what you're looking at here, with this slightly used Fowler F-11 Billet 6-71 Blower that was just freshened up at the Blower Shop, with zero runs... Install this one right out of the box, then tow to the lanes! It's equipped with an upgraded billet case, along with quite a few extra's added in to make the deal that much better! Let's start with the upgraded 12 bolt billet blower snout that measures 3 13/16" long. The billet aluminum case is in great shape outside, with normal wear inside. Both billet rotors are the 60 degree style, in nice used shape with normal wear and loaded with brand new teflon strips already installed. And brand new front seals are also included as well. Top opening measures 9 3/4" long x 4 15/16" wide and outfitted with custom Davenport modifications. And the bottom is equipped with the popular small delta style front opening for optimum efficiency... So, if you're looking to duplicate this exact set-up brand new, then get ready to spend right around $10,000 bucks to make it happen!!! But not here... Not today! Get this one on the truck and headed your way with one phone call... Then figure out where to spend that extra $5,000 bucks you just saved right here by not buying new elsewhere! The road to the winners circle is shorter than you think! GoNitrolink
Priced to move at: Only $4995. + shipping
Please note: Multiple shipping options available. Please call: (916) 425-1427 to purchase.
Used RCD Splined Pulley Spacers - Metal
Attention all race teams running the quick change blower pulleys! We have plenty of slightly Used RCD Splined Pulley Spacers - Metal that are in nice shape and ready for action! These are the metal style that are available in .60, or .65, thickness. So don't delay, order today!
Used RCD Splined Pulley Spacers - Nylon
Attention all race teams running the quick change blower pulleys! We have plenty of slightly Used RCD Splined Pulley Spacers - Nylon that are in nice shape and ready for action! These are the nylon style that are available in .30 thickness. So don't delay, order today!
Lapping Plate Sand Paper Sheets
Keep that brand new Lapping Plate earning its keep with an extra supply of Lapping Plate Sand Paper Sheets specifically fitted for the plate itself. These sheets are equipped with the popular 60 grit surface needed, with an adhesive backing for a secure fit. Each sheet is sold separately and when used with the lapping plate, it's one of the most effective ways to help assure that your blower and manifold are working together for optimum performance! And we'll make it quick and easy to order yours right here... Job done!
MAKE OFFER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used Billet Blower Pulley Spacer
Making sure your top a bottom blower pulleys are lined up and working together for maximum performance is key. Proper alignment also helps extend blower belt life and reliability on the race track. And the way you adjust for that is by installing a slightly Used Billet Blower Pulley Spacer like this one. It's in nice shape, with the standard bolt pattern using your 3/8" size bolts (not included). It measures 1" thick, however can be turned down if needed to fit your exact specifications. And this one's sure to save the do it yourself racer a few bucks not having to buy new elsewhere!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 11mm - 36T - Blower Pulley
If you're looking for a slightly Used RCD 11mm - 36T - Blower Pulley and looking to save a few bucks at the same time, then it's you're lucky day! This one's an 11mm, 36 tooth, GT style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor, measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 14mm - 32T - Blower Pulley
How about a slightly Used RCD 14mm - 32T - Blower Pulley that's ready for showtime! This one's a 14mm, 32 tooth, GT style made of aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 8mm 65T Blower Pulley
If you're looking for a nice Used RCD 8mm 65T Blower Pulley and looking to save a few bucks at the same time, then it's you're lucky day! This one's the GT style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for the cool visual factor, measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another "Nitrolink" Slightly Used MONEY SAVING OFFER!!!
Used RCD 8mm 57T Blower Pulley
How about a nice Used RCD 8mm 57T Blower Pulley that's in great shape and ready for showtime! This one's the GT style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
Another BRAND NEW item... Without the brand new price!!!
RCD 14mm - 34T - Blower Pulley
How about a BRAND NEW RCD 14mm - 34T - Blower Pulley without the brand new price! This one's a 14mm, 34 tooth, HTD style made of billet aluminum and designed to work with the popular 75, or 84 mm wide blower belts. Pulley is anodized black for that awesome look, measures 3 1/2" wide and could work on most any brand of 4-71, 6-71, 8,10,12, or 14-71 Superchargers on the market. Bolt it right up to your Dragster, Funny Car, Altered, Pro Mod, Drag Boat, Tractor Puller, Pro Street, or Hot Rod and DROP THE HAMMER!!!
